Hi > I have found an issue in the ideapad-laptop driver which causes WiFi > to not work on the Lenovo Legion Y720 laptop. It seems the issue is > generally present on this laptop as can be found by googling and > finding that the workaround is to blacklist ideapad-laptop. > > In the code comment here: > https://github.com/torvalds/linux/blob/1df27313f50a57497c1faeb6a6ae4ca939c85a7d/drivers/platform/x86/ideapad-laptop.c#L1462 > it is explained that the driver has a list of devices which are known > to have an RF-kill switch and for other devices it assumes that it > does not have one. Since the list is in fact empty, one would conclude > that the driver should never cause an RF-kill block. However on this > laptop loading the driver has this exact effect. > > The reason is what seems to be a bug here: > https://github.com/torvalds/linux/blob/1df27313f50a57497c1faeb6a6ae4ca939c85a7d/drivers/platform/x86/ideapad-laptop.c#L1001 > At initialization, ideapad_register_rfkill() sets the initial RF-kill > block state based on reading the state of the possibly nonexisting > RF-kill switch without considering priv->features.hw_rfkill_switch. Note, that there are two distinct things at play here: hard and soft blocking. The part of the code you're referring to here is concerned about the soft blocking state. Therefore it makes sense that it does not consider the value of features.hw_rfkill_switch. > This is inconsistent with ideapad_sync_rfk_state() which sets > unblocked if hw_rfkill_switch is false. The result is that > ideapad_register_rfkill() would block but ideapad_sync_rfk_state() > would unblock as soon as it is called. But on my laptop > ideapad_sync_rfk_state() is presumably never called and the blocked > state persists indefinitely. I have verified this by changing > ideapad_register_rfkill() to use the same logic as > ideapad_sync_rfk_state() which has fixed the problem. > > I am attaching a patch for master and 5.4, I have only tested the latter. > It seems from those patches that simply reading from that address causes wifi not to work. Could you please add some printing to the driver without the patches to check the value of sw_blocked? (e.g. pr_info("sw_blocked = %lu\n", sw_blocked); ) And also attach the output of the `rfkill` utility after the module loads and wifi does not work? Regards, Barnabás Pőcze
