On Mon, Mar 8, 2021 at 12:20 PM Limonciello, Mario
<Mario.Limonciello@xxxxxxxx> wrote:
>
> >
> > [EXTERNAL EMAIL]
> >
> > Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
> > programmed in the Tiger Lake GBE controller is not large enough to allow
> > the platform to enter Package C10, which in turn prevents the platform from
> > achieving its low power target during suspend-to-idle. Ignore the GBE LTR
> > value on Tiger Lake. LTR ignore functionality is currently performed solely
> > by a debugfs write call. Split out the LTR code into its own function that
> > can be called by both the debugfs writer and by this work around.
> >
> > Signed-off-by: David E. Box <david.e.box@xxxxxxxxxxxxxxx>
> > Reviewed-by: Sasha Neftin <sasha.neftin@xxxxxxxxx>
> > Cc: intel-wired-lan@xxxxxxxxxxxxxxxx
> > ---
> > drivers/platform/x86/intel_pmc_core.c | 55 ++++++++++++++++++++-------
> > 1 file changed, 42 insertions(+), 13 deletions(-)
>
> I feel like this driver change causes a weak reference between e1000e and intel_pmc_core.
> It would mean significantly different behavior if you use e1000e but don't have PMC module
> available for any reason.
Can you elaborate what would change significantly? This is a FW/HW
issue and the driver is just doing a work around to let the platform
enter a deep idle state beyond PC10. If the system could enter PC10
and was denied entry by PMC only because of a bad LAN LTR, then that's
purely an e1000e driver/GBE fw issue.
>
> In this case does it maybe make sense to at least use "imply" in the Kconfig for e1000e so
> that selecting e1000e gets intel-pmc-core enabled too?
This change would tell PMC to ignore GBE LTR, regardless of which GBE
driver is selected. This doesn't bind e1000e.
>
> >
> > diff --git a/drivers/platform/x86/intel_pmc_core.c
> > b/drivers/platform/x86/intel_pmc_core.c
> > index ee2f757515b0..ab31eb646a1a 100644
> > --- a/drivers/platform/x86/intel_pmc_core.c
> > +++ b/drivers/platform/x86/intel_pmc_core.c
> > @@ -863,34 +863,45 @@ static int pmc_core_pll_show(struct seq_file *s, void
> > *unused)
> > }
> > DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
> >
> > -static ssize_t pmc_core_ltr_ignore_write(struct file *file,
> > - const char __user *userbuf,
> > - size_t count, loff_t *ppos)
> > +static int pmc_core_write_ltr_ignore(u32 value)
> > {
> > struct pmc_dev *pmcdev = &pmc;
> > const struct pmc_reg_map *map = pmcdev->map;
> > - u32 val, buf_size, fd;
> > - int err;
> > -
> > - buf_size = count < 64 ? count : 64;
> > -
> > - err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
> > - if (err)
> > - return err;
> > + u32 fd;
> > + int err = 0;
> >
> > mutex_lock(&pmcdev->lock);
> >
> > - if (val > map->ltr_ignore_max) {
> > + if (fls(value) > map->ltr_ignore_max) {
> > err = -EINVAL;
> > goto out_unlock;
> > }
> >
> > fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
> > - fd |= (1U << val);
> > + fd |= value;
> > pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd);
> >
> > out_unlock:
> > mutex_unlock(&pmcdev->lock);
> > +
> > + return err;
> > +}
> > +
> > +static ssize_t pmc_core_ltr_ignore_write(struct file *file,
> > + const char __user *userbuf,
> > + size_t count, loff_t *ppos)
> > +{
> > + u32 buf_size, val;
> > + int err;
> > +
> > + buf_size = count < 64 ? count : 64;
> > +
> > + err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
> > + if (err)
> > + return err;
> > +
> > + err = pmc_core_write_ltr_ignore(1U << val);
> > +
> > return err == 0 ? count : err;
> > }
> >
> > @@ -1189,6 +1200,15 @@ static int quirk_xtal_ignore(const struct dmi_system_id
> > *id)
> > return 0;
> > }
> >
> > +static int quirk_ltr_ignore(u32 val)
> > +{
> > + int err;
> > +
> > + err = pmc_core_write_ltr_ignore(val);
> > +
> > + return err;
> > +}
> > +
> > static const struct dmi_system_id pmc_core_dmi_table[] = {
> > {
> > .callback = quirk_xtal_ignore,
> > @@ -1244,6 +1264,15 @@ static int pmc_core_probe(struct platform_device *pdev)
> > pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
> > dmi_check_system(pmc_core_dmi_table);
> >
> > + /*
> > + * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
> > + * a cable is attached. Tell the PMC to ignore it.
> > + */
> > + if (pmcdev->map == &tgl_reg_map) {
> > + dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
> > + quirk_ltr_ignore(1U << 3);
> > + }
> > +
> > pmc_core_dbgfs_register(pmcdev);
> >
> > device_initialized = true;
> > --
> > 2.25.1
>
--
Thanks,
Rajneesh
