Re: [PATCH 1/2] platorm/x86: thinkpad_acpi: sysfs interface to reduce wlan tx power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nitin,

On 2/12/21 6:58 AM, Nitin Joshi wrote:
> Some newer Thinkpads have the WLAN antenna placed close to the WWAN
> antenna. In these cases FCC certification requires that when WWAN is
> active we reduce WLAN transmission power. A new Dynamic Power
> Reduction Control (DPRC) method is available from the BIOS on these
> platforms to reduce or restore WLAN Tx power.
> 
> This patch provides a sysfs interface that userspace can use to adjust the
> WLAN power appropriately.
> 
> Reviewed-by: Mark Pearson <markpearson@xxxxxxxxxx>
> Signed-off-by: Nitin Joshi <njoshi1@xxxxxxxxxx>

This patch as well as patch 2/2 generally look ok to me.

The one thing which stands out is the:

		*wlan_txreduce = -1;

Resp:

		*wwan_antennatype = -1;

	default:
		return sysfs_emit(buf, "unknown type\n");

Bits, which Barnabás already pointed out.

If you can prepare a v2 of this patch-set addressing all the
review remarks which you have received so far then that
would be great.

Regards,

Hans




> ---
>  .../admin-guide/laptops/thinkpad-acpi.rst     |  18 +++
>  drivers/platform/x86/thinkpad_acpi.c          | 136 ++++++++++++++++++
>  2 files changed, 154 insertions(+)
> 
> diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> index 5fe1ade88c17..10410811b990 100644
> --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
> @@ -51,6 +51,7 @@ detailed description):
>  	- UWB enable and disable
>  	- LCD Shadow (PrivacyGuard) enable and disable
>  	- Lap mode sensor
> +	- WLAN transmission power control
>  
>  A compatibility table by model and feature is maintained on the web
>  site, http://ibm-acpi.sf.net/. I appreciate any success or failure
> @@ -1447,6 +1448,23 @@ they differ between desk and lap mode.
>  The property is read-only. If the platform doesn't have support the sysfs
>  class is not created.
>  
> +WLAN transmission power control
> +--------------------------------
> +
> +sysfs: wlan_tx_strength_reduce
> +
> +Some newer Thinkpads have the WLAN antenna placed close to the WWAN antenna.
> +This interface will be used by userspace to reduce the WLAN Tx power strength
> +when WWAN is active, as is required for FCC certification.
> +
> +The available commands are::
> +
> +        echo '0' > /sys/devices/platform/thinkpad_acpi/wlan_tx_strength_reduce
> +        echo '1' > /sys/devices/platform/thinkpad_acpi/wlan_tx_strength_reduce
> +
> +The first command restores the wlan transmission power and the latter one
> +reduces wlan transmission power.
> +
>  EXPERIMENTAL: UWB
>  -----------------
>  
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index f3e8eca8d86d..6dbbd4a14264 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -9983,6 +9983,138 @@ static struct ibm_struct proxsensor_driver_data = {
>  	.exit = proxsensor_exit,
>  };
>  
> +/*************************************************************************
> + * DPRC(Dynamic Power Reduction Control) subdriver, for the Lenovo WWAN
> + * and WLAN feature.
> + */
> +#define DPRC_GET_WLAN_STATE             0x20000
> +#define DPRC_SET_WLAN_POWER_REDUCE      0x00030010
> +#define DPRC_SET_WLAN_POWER_FULL        0x00030100
> +static int has_wlantxreduce;
> +static int wlan_txreduce;
> +
> +static int dprc_command(int command, int *output)
> +{
> +	acpi_handle dprc_handle;
> +
> +	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DPRC", &dprc_handle))) {
> +		/* Platform doesn't support DPRC */
> +		return -ENODEV;
> +	}
> +
> +	if (!acpi_evalf(dprc_handle, output, NULL, "dd", command))
> +		return -EIO;
> +
> +	/*
> +	 * METHOD_ERR gets returned on devices where few commands are not supported
> +	 * for example WLAN power reduce command is not supported on some devices.
> +	 */
> +	if (*output & METHOD_ERR)
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int get_wlan_state(int *has_wlantxreduce, int *wlan_txreduce)
> +{
> +	int output, err;
> +
> +	/* Get current WLAN Power Transmission state */
> +	err = dprc_command(DPRC_GET_WLAN_STATE, &output);
> +	if (err)
> +		return err;
> +
> +	if (output & BIT(4))
> +		*wlan_txreduce = 1;
> +	else if (output & BIT(8))
> +		*wlan_txreduce = 0;
> +	else
> +		*wlan_txreduce = -1;
> +
> +	*has_wlantxreduce = 1;
> +	return 0;
> +}
> +
> +/* sysfs wlan entry */
> +static ssize_t wlan_tx_strength_reduce_show(struct device *dev,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	int err;
> +
> +	err = get_wlan_state(&has_wlantxreduce, &wlan_txreduce);
> +	if (err)
> +		return err;
> +
> +	return sysfs_emit(buf, "%d\n", wlan_txreduce);
> +}
> +
> +static ssize_t wlan_tx_strength_reduce_store(struct device *dev,
> +				struct device_attribute *attr,
> +				const char *buf, size_t count)
> +{
> +	int output, err;
> +	unsigned long t;
> +
> +	if (parse_strtoul(buf, 1, &t))
> +		return -EINVAL;
> +
> +	tpacpi_disclose_usertask(attr->attr.name,
> +				"WLAN tx strength reduced %lu\n", t);
> +
> +	switch (t) {
> +	case 0:
> +		err = dprc_command(DPRC_SET_WLAN_POWER_FULL, &output);
> +		break;
> +	case 1:
> +		err = dprc_command(DPRC_SET_WLAN_POWER_REDUCE, &output);
> +		break;
> +	default:
> +		err = -EINVAL;
> +		dev_err(&tpacpi_pdev->dev, "Unknown operating mode. Ignoring\n");
> +		break;
> +	}
> +
> +	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, "wlan_tx_strength_reduce");
> +	return count;
> +}
> +static DEVICE_ATTR_RW(wlan_tx_strength_reduce);
> +
> +static int tpacpi_dprc_init(struct ibm_init_struct *iibm)
> +{
> +	int wlantx_err, err;
> +
> +	wlantx_err = get_wlan_state(&has_wlantxreduce, &wlan_txreduce);
> +	/*
> +	 * If support isn't available (ENODEV) for both devices then quit, but
> +	 * don't return an error.
> +	 */
> +	if (wlantx_err == -ENODEV)
> +		return 0;
> +	/* Otherwise, if there was an error return it */
> +	if (wlantx_err && (wlantx_err != -ENODEV))
> +		return wlantx_err;
> +
> +	if (has_wlantxreduce) {
> +		err = sysfs_create_file(&tpacpi_pdev->dev.kobj,
> +				&dev_attr_wlan_tx_strength_reduce.attr);
> +		if (err)
> +			return err;
> +	}
> +	return 0;
> +}
> +
> +static void dprc_exit(void)
> +{
> +	if (has_wlantxreduce)
> +		sysfs_remove_file(&tpacpi_pdev->dev.kobj, &dev_attr_wlan_tx_strength_reduce.attr);
> +}
> +
> +static struct ibm_struct dprc_driver_data = {
> +	.name = "dprc",
> +	.exit = dprc_exit,
> +};
> +
>  /****************************************************************************
>   ****************************************************************************
>   *
> @@ -10475,6 +10607,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
>  		.init = tpacpi_proxsensor_init,
>  		.data = &proxsensor_driver_data,
>  	},
> +	{
> +		.init = tpacpi_dprc_init,
> +		.data = &dprc_driver_data,
> +	},
>  };
>  
>  static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
> 




[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux