Add documentation for the new attributes for line cards: - CPLDs versioning. - Write protection control for 'nvram' devices. - Line card reset reasons. - Enabling burning of FPGA and CPLDs. - Enabling burning of FPGA and gearbox SPI flashes, - Enabling power of whole line card. - Enabling power of QSFP ports equipped on line card. - The maximum powered required for line card feeding. - Line card configuration Id. Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx> --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 92 +++++++++++++++++++++++++ 1 file changed, 92 insertions(+) diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 1d1a8ee59534..a22e9d6c0904 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -326,3 +326,95 @@ Description: This file unlocks system after hardware or firmware thermal locking. The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files show with which CPLD major and minor versions + and part number has been burned CPLD device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files show with which FPGA major and minor versions + and part number has been burned FPGA device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/ini_wp +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files allow to overwrite line card VPD and firmware blob + hardware write protection mode. When attribute is set 1 - write + protection is disabled, when 0 - enabled. By default both are + write protected. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files show the line reset cause, as following: power + auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset + failed, line card reset failed, power off from chassis. + Value 1 in file means this is reset cause, 0 - otherwise. Only one of + the above causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files allow CPLD and FPGA burning. Value 1 in file means burning + is enabled, 0 - otherwise. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files allow to power on/off all QSFP ports and whole line card. + The attributes are set 1 for power on, 0 - for power off. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files allow gearboxes and FPGA SPI flash burning. + The attributes are set 1 to enable burning, 0 - to disable. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config +Date: March 2021 +KernelVersion: 5.12 +Contact: Vadim Pasternak <vadimp@xxxxxxxxxx> +Description: These files provide the maximum powered required for line card + feeding and line card configuration Id. + + The files are read only. -- 2.11.0
