Update sysfs Document file to include moved /proc leaves.
Signed-off-by: Mike Travis <mike.travis@xxxxxxx>
---
Documentation/ABI/testing/sysfs-firmware-sgi_uv | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
index ca5cdccdb1a8..fa7f7aefa5ed 100644
--- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv
+++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -7,9 +7,24 @@ Description:
Under that directory are a number of read-only attributes:
+ archtype
+ hub_type
+ hubless
partition_id
uv_type
+ The archtype entry contains the UV architecture type that
+ is used to select arch-dependent addresses and features.
+ If can be set via the OEM_ID in the ACPI MADT table or by
+ UVsystab entry both passed from UV BIOS.
+
+ The hub_type entry is used to select the type of hub which is
+ similar to uv_type but encoded in a binary format. Include
+ the file uv_hub.h to get the definitions.
+
+ The hubless entry basically is present and set only if there
+ is no hub. In this case the hub_type entry is not present.
+
The partition_id entry contains the partition id.
UV systems can be partitioned into multiple physical
machines, which each partition running a unique copy
@@ -18,6 +33,7 @@ Description:
The uv_type entry contains the hub revision number.
This value can be used to identify the UV system version:
+ "0.*" = Hubless UV ('*' is subtype)
"3.0" = UV2
"5.0" = UV3
"7.0" = UV4
--
2.21.0
