Hi,
On 10/5/20 3:13 PM, Benjamin Berg wrote:
Hi,
seems reasonable to me. Quite simple, but likely good enough as we are
sticking to only use well known names.
Just found a small typo.
Benjamin
On Sat, 2020-10-03 at 15:19 +0200, Hans de Goede wrote:
On modern systems CPU/GPU/... performance is often dynamically configurable
in the form of e.g. variable clock-speeds and TPD. The performance is often
automatically adjusted to the load by some automatic-mechanism (which may
very well live outside the kernel).
These auto performance-adjustment mechanisms often can be configured with
one of several performance-profiles, with either a bias towards low-power
consumption (and cool and quiet) or towards performance (and higher power
consumption and thermals).
Introduce a new performance_profile class/sysfs API which offers a generic
API for selecting the performance-profile of these automatic-mechanisms.
Cc: Mark Pearson <markpearson@xxxxxxxxxx>
Cc: Elia Devito <eliadevito@xxxxxxxxx>
Cc: Bastien Nocera <hadess@xxxxxxxxxx>
Cc: Benjamin Berg <bberg@xxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-acpi@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../testing/sysfs-class-performance_profile | 104 ++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-performance_profile
diff --git a/Documentation/ABI/testing/sysfs-class-performance_profile b/Documentation/ABI/testing/sysfs-class-performance_profile
new file mode 100644
index 000000000000..9c67cae39600
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-performance_profile
@@ -0,0 +1,104 @@
+Performance-profile selection (e.g. /sys/class/performance_profile/thinkpad_acpi/)
+
+On modern systems CPU/GPU/... performance is often dynamically configurable
+in the form of e.g. variable clock-speeds and TPD. The performance is often
+automatically adjusted to the load by some automatic-mechanism (which may
+very well live outside the kernel).
+
+These auto performance-adjustment mechanisms often can be configured with
+one of several performance-profiles, with either a bias towards low-power
+consumption (and cool and quiet) or towards performance (and higher power
+consumption and thermals).
+
+The purpose of the performance_profile class is to offer a generic sysfs
+API for selecting the performance-profile of these automatic-mechanisms.
+
+Note that this API is only for selecting the performance-profile, it is
+NOT a goal of this API to allow monitoring the resulting performance
+characteristics. Monitoring performance is best done with device/vendor
+specific tools such as e.g. turbostat.
+
+Specifically when selecting a high-performance profile the actual achieved
+performance may be limited by various factors such as: the heat generated by
+other components, room temperature, free air flow at the bottom of a laptop,
+etc. It is explicitly NOT a goal of this API to let userspace know about
+any sub-optimal conditions which are impeding reaching the requested
+performance level.
+
+Since numbers are a rather meaningless way to describe performance-profiles
+this API uses strings to describe the various profiles. To make sure that
+userspace gets a consistent experience when using this API this API document
+defines a fixed set of profile-names. Drivers *must* map their internal
+profile representation/names onto this fixed set.
+
+If for some reason there is no good match when mapping then a new profile-name
+may be added. Drivers which wish to introduce new profile-names must:
+1. Have very good reasons to do so.
+2. Add the new profile-name to this document, so that future drivers which also
+ have a similar problem can use the same new. Usually new profile-names will
Typo, "new" -> "name" I suppose.
Ack, fixed in my local tree.
Thx.
Regards,
Hans
+ be added to the "extra profile-names" section of this document. But in some
+ cases the set of standard profile-names may be extended.
+
+What: /sys/class/performance_profile/<device>/available_profiles
+Date: October 2020
+Contact: Hans de Goede <hdegoede@xxxxxxxxxx>
+Description:
+ Reading this file gives a space separated list of profiles
+ supported for this device.
+
+ Drivers must use the following standard profile-names whenever
+ possible:
+
+ low-power: Emphasises low power consumption
+ (and also cool and quiet)
+ balanced-low-power: Balances between low power consumption
+ and performance with a slight bias
+ towards low power
+ balanced: Balance between low power consumption
+ and performance
+ balanced-performance: Balances between performance and low
+ power consumption with a slight bias
+ towards performance
+ performance: Emphasises performance (and may lead to
+ higher temperatures and fan speeds)
+
+ Userspace may expect drivers to offer at least several of these
+ standard profile-names! If none of the above are a good match
+ for some of the drivers profiles, then drivers may use one of
+ these extra profile-names:
+ <reserved for future use>
+
+What: /sys/class/performance_profile/<device>/current_profile
+Date: October 2020
+Contact: Hans de Goede <hdegoede@xxxxxxxxxx>
+Description:
+ Reading this file gives the current selected profile for this
+ device. Writing this file with one of the strings from
+ available_profiles changes the profile to the new value.
+
+ Reading this file may also return "custom". This is intended for
+ drivers which have and export multiple knobs influencing
+ performance. Such drivers may very well still want to offer a
+ set of profiles for easy of use and to be able to offer a
+ consistent standard API (this API) to userspace for configuring
+ their performance. The "custom" value is intended for when a
+ user has directly configured the knobs (through e.g. some
+ advanced control-panel for a GPU) and the knob values do not
+ match any of the presets represented by the
+ performance-profiles. In this case writing this file will
+ override the modifications and restore the selected presets.
+
+What: /sys/class/performance_profile/<device>/type
+Date: October 2020
+Contact: Hans de Goede <hdegoede@xxxxxxxxxx>
+Description:
+ Performance-profiles may be system-wide, or for a specific
+ device (e.g. CPU / GPU). System-wide profiles are typically
+ used on devices where where a single cooling solution is
+ shared between all components, such as laptops and NUCs.
+
+ Reading this file indicates the type of the device for which
+ the thermal-profile is being configured.
+
+ Valid values: "system"
+ Reserved for future use values: "cpu", "gpu"
