Conventionally, wake-up events for a specific device, in our case the
lid device, are managed via the ACPI _PRW field. While this does not
seem strictly necessary based on ACPI spec, the kernel disables GPE
wakeups to avoid non-wakeup interrupts preventing suspend by default and
only enables GPEs associated via the _PRW field with a wake-up capable
device. This behavior has been introduced in commit f941d3e41da7 ("ACPI:
EC / PM: Disable non-wakeup GPEs for suspend-to-idle") and is described
in more detail in its commit message.
Unfortunately, on MS Surface devices, there is no _PRW field present on
the lid device, thus no GPE is associated with it, and therefore the GPE
responsible for sending the status-change notification to the lid gets
disabled during suspend, making it impossible to wake the device via the
lid.
This patch introduces a pseudo-device and respective driver which, based
on some DMI matching, marks the corresponding GPE of the lid device for
wake and enables it during suspend. The behavior of this driver models
the behavior of the ACPI/PM core for normal wakeup GPEs, properly
declared via the _PRW field.
Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
---
Changes in v2:
- Use software nodes and device properties instead of platform data.
- Simplify module alias.
- Add comment regarding origin of GPE numbers.
- Fix style issues.
---
MAINTAINERS | 6 +
drivers/platform/x86/Kconfig | 10 +
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/surface_gpe.c | 303 +++++++++++++++++++++++++++++
4 files changed, 320 insertions(+)
create mode 100644 drivers/platform/x86/surface_gpe.c
diff --git a/MAINTAINERS b/MAINTAINERS
index b5cfab015bd61..a9f8400096e16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11549,6 +11549,12 @@ F: drivers/scsi/smartpqi/smartpqi*.[ch]
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
+MICROSOFT SURFACE GPE LID SUPPORT DRIVER
+M: Maximilian Luz <luzmaximilian@xxxxxxxxx>
+L: platform-driver-x86@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/platform/x86/surface_gpe.c
+
MICROSOFT SURFACE PRO 3 BUTTON DRIVER
M: Chen Yu <yu.c.chen@xxxxxxxxx>
L: platform-driver-x86@xxxxxxxxxxxxxxx
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 40219bba68011..cd29ab65f8b15 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -894,6 +894,16 @@ config SURFACE_3_POWER_OPREGION
This driver provides support for ACPI operation
region of the Surface 3 battery platform driver.
+config SURFACE_GPE
+ tristate "Surface GPE/Lid Support Driver"
+ depends on ACPI
+ depends on DMI
+ help
+ This driver marks the GPEs related to the ACPI lid device found on
+ Microsoft Surface devices as wakeup sources and prepares them
+ accordingly. It is required on those devices to allow wake-ups from
+ suspend by opening the lid.
+
config SURFACE_PRO3_BUTTON
tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
depends on ACPI && INPUT
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 5f823f7eff452..58c2a6f52e394 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o
obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
+obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
# MSI
diff --git a/drivers/platform/x86/surface_gpe.c b/drivers/platform/x86/surface_gpe.c
new file mode 100644
index 0000000000000..10e563f253b9e
--- /dev/null
+++ b/drivers/platform/x86/surface_gpe.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Surface GPE/Lid driver to enable wakeup from suspend via the lid by
+ * properly configuring the respective GPEs.
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/*
+ * Note: The GPE numbers for the lid devices found below have been obtained
+ * from ACPI/the DSDT table, specifically from the GPE handler for the
+ * lid.
+ */
+
+static const struct property_entry lid_device_props_l17[] = {
+ PROPERTY_ENTRY_U32("gpe", 0x17),
+ {},
+};
+
+static const struct property_entry lid_device_props_l4D[] = {
+ PROPERTY_ENTRY_U32("gpe", 0x4D),
+ {},
+};
+
+static const struct property_entry lid_device_props_l4F[] = {
+ PROPERTY_ENTRY_U32("gpe", 0x4F),
+ {},
+};
+
+static const struct property_entry lid_device_props_l57[] = {
+ PROPERTY_ENTRY_U32("gpe", 0x57),
+ {},
+};
+
+/*
+ * Note: When changing this, don't forget to check that the MODULE_ALIAS below
+ * still fits.
+ */
+static const struct dmi_system_id dmi_lid_device_table[] = {
+ {
+ .ident = "Surface Pro 4",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
+ },
+ .driver_data = (void *)lid_device_props_l17,
+ },
+ {
+ .ident = "Surface Pro 5",
+ .matches = {
+ /*
+ * We match for SKU here due to generic product name
+ * "Surface Pro".
+ */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
+ },
+ .driver_data = (void *)lid_device_props_l4F,
+ },
+ {
+ .ident = "Surface Pro 5 (LTE)",
+ .matches = {
+ /*
+ * We match for SKU here due to generic product name
+ * "Surface Pro"
+ */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
+ },
+ .driver_data = (void *)lid_device_props_l4F,
+ },
+ {
+ .ident = "Surface Pro 6",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
+ },
+ .driver_data = (void *)lid_device_props_l4F,
+ },
+ {
+ .ident = "Surface Pro 7",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 7"),
+ },
+ .driver_data = (void *)lid_device_props_l4D,
+ },
+ {
+ .ident = "Surface Book 1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
+ },
+ .driver_data = (void *)lid_device_props_l17,
+ },
+ {
+ .ident = "Surface Book 2",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
+ },
+ .driver_data = (void *)lid_device_props_l17,
+ },
+ {
+ .ident = "Surface Book 3",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 3"),
+ },
+ .driver_data = (void *)lid_device_props_l4D,
+ },
+ {
+ .ident = "Surface Laptop 1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
+ },
+ .driver_data = (void *)lid_device_props_l57,
+ },
+ {
+ .ident = "Surface Laptop 2",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
+ },
+ .driver_data = (void *)lid_device_props_l57,
+ },
+ {
+ .ident = "Surface Laptop 3 (Intel 13\")",
+ .matches = {
+ /*
+ * We match for SKU here due to different vairants: The
+ * AMD (15") version does not rely on GPEs.
+ */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_3_1867:1868"),
+ },
+ .driver_data = (void *)lid_device_props_l4D,
+ },
+ { }
+};
+
+struct surface_lid_device {
+ u32 gpe_number;
+};
+
+static int surface_lid_enable_wakeup(struct device *dev, bool enable)
+{
+ const struct surface_lid_device *lid = dev_get_drvdata(dev);
+ int action = enable ? ACPI_GPE_ENABLE : ACPI_GPE_DISABLE;
+ acpi_status status;
+
+ status = acpi_set_gpe_wake_mask(NULL, lid->gpe_number, action);
+ if (status) {
+ dev_err(dev, "failed to set GPE wake mask: %d\n", status);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int surface_gpe_suspend(struct device *dev)
+{
+ return surface_lid_enable_wakeup(dev, true);
+}
+
+static int surface_gpe_resume(struct device *dev)
+{
+ return surface_lid_enable_wakeup(dev, false);
+}
+
+static SIMPLE_DEV_PM_OPS(surface_gpe_pm, surface_gpe_suspend, surface_gpe_resume);
+
+static int surface_gpe_probe(struct platform_device *pdev)
+{
+ struct surface_lid_device *lid;
+ u32 gpe_number;
+ int status;
+
+ status = device_property_read_u32(&pdev->dev, "gpe", &gpe_number);
+ if (status)
+ return -ENODEV;
+
+ status = acpi_mark_gpe_for_wake(NULL, gpe_number);
+ if (status) {
+ dev_err(&pdev->dev, "failed to mark GPE for wake: %d\n", status);
+ return -EINVAL;
+ }
+
+ status = acpi_enable_gpe(NULL, gpe_number);
+ if (status) {
+ dev_err(&pdev->dev, "failed to enable GPE: %d\n", status);
+ return -EINVAL;
+ }
+
+ lid = devm_kzalloc(&pdev->dev, sizeof(struct surface_lid_device),
+ GFP_KERNEL);
+ if (!lid)
+ return -ENOMEM;
+
+ lid->gpe_number = gpe_number;
+ platform_set_drvdata(pdev, lid);
+
+ status = surface_lid_enable_wakeup(&pdev->dev, false);
+ if (status) {
+ acpi_disable_gpe(NULL, gpe_number);
+ platform_set_drvdata(pdev, NULL);
+ return status;
+ }
+
+ return 0;
+}
+
+static int surface_gpe_remove(struct platform_device *pdev)
+{
+ struct surface_lid_device *lid = dev_get_drvdata(&pdev->dev);
+
+ /* restore default behavior without this module */
+ surface_lid_enable_wakeup(&pdev->dev, false);
+ acpi_disable_gpe(NULL, lid->gpe_number);
+
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver surface_gpe_driver = {
+ .probe = surface_gpe_probe,
+ .remove = surface_gpe_remove,
+ .driver = {
+ .name = "surface_gpe",
+ .pm = &surface_gpe_pm,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+};
+
+static struct platform_device *surface_gpe_device;
+
+static int __init surface_gpe_init(void)
+{
+ const struct dmi_system_id *match;
+ const struct property_entry *props;
+ struct platform_device *pdev;
+ struct fwnode_handle *fwnode;
+ int status;
+
+ match = dmi_first_match(dmi_lid_device_table);
+ if (!match) {
+ pr_info(KBUILD_MODNAME": no device detected, exiting\n");
+ return 0;
+ }
+
+ props = match->driver_data;
+
+ status = platform_driver_register(&surface_gpe_driver);
+ if (status)
+ return status;
+
+ pdev = platform_device_alloc("surface_gpe", PLATFORM_DEVID_NONE);
+ if (!pdev) {
+ platform_driver_unregister(&surface_gpe_driver);
+ return -ENOMEM;
+ }
+
+ fwnode = fwnode_create_software_node(props, NULL);
+ if (IS_ERR(fwnode)) {
+ platform_device_put(pdev);
+ platform_driver_unregister(&surface_gpe_driver);
+ return PTR_ERR(fwnode);
+ }
+
+ pdev->dev.fwnode = fwnode;
+
+ status = platform_device_add(pdev);
+ if (status) {
+ platform_device_put(pdev);
+ platform_driver_unregister(&surface_gpe_driver);
+ return status;
+ }
+
+ surface_gpe_device = pdev;
+ return 0;
+}
+module_init(surface_gpe_init);
+
+static void __exit surface_gpe_exit(void)
+{
+ if (!surface_gpe_device)
+ return;
+
+ fwnode_remove_software_node(surface_gpe_device->dev.fwnode);
+ platform_device_unregister(surface_gpe_device);
+ platform_driver_unregister(&surface_gpe_driver);
+}
+module_exit(surface_gpe_exit);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@xxxxxxxxx>");
+MODULE_DESCRIPTION("Surface GPE/Lid Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnMicrosoftCorporation:pnSurface*:*");
--
2.28.0
