On Thu, Aug 27, 2020 at 10:00 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> 'dev' is shorter and simpler than '&client->dev' and in few cases it
> allows to skip line wrapping. Probe function uses '&client->dev' a lot,
> so this improves readability slightly.
>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Suggested-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v2:
> 1. New patch
> ---
> drivers/input/touchscreen/bu21029_ts.c | 37 +++++++++++---------------
> 1 file changed, 16 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c
> index 96c178b606dc..78e256254764 100644
> --- a/drivers/input/touchscreen/bu21029_ts.c
> +++ b/drivers/input/touchscreen/bu21029_ts.c
> @@ -334,6 +334,7 @@ static void bu21029_stop_chip(struct input_dev *dev)
> static int bu21029_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> + struct device *dev = &client->dev;
> struct bu21029_ts_data *bu21029;
> struct input_dev *in_dev;
> int error;
> @@ -342,37 +343,33 @@ static int bu21029_probe(struct i2c_client *client,
> I2C_FUNC_SMBUS_WRITE_BYTE |
> I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
> I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> - dev_err(&client->dev,
> - "i2c functionality support is not sufficient\n");
> + dev_err(dev, "i2c functionality support is not sufficient\n");
> return -EIO;
> }
>
> - bu21029 = devm_kzalloc(&client->dev, sizeof(*bu21029), GFP_KERNEL);
> + bu21029 = devm_kzalloc(dev, sizeof(*bu21029), GFP_KERNEL);
> if (!bu21029)
> return -ENOMEM;
>
> - error = device_property_read_u32(&client->dev, "rohm,x-plate-ohms",
> - &bu21029->x_plate_ohms);
> + error = device_property_read_u32(dev, "rohm,x-plate-ohms", &bu21029->x_plate_ohms);
> if (error) {
> - dev_err(&client->dev,
> - "invalid 'x-plate-ohms' supplied: %d\n", error);
> + dev_err(dev, "invalid 'x-plate-ohms' supplied: %d\n", error);
> return error;
> }
>
> - bu21029->vdd = devm_regulator_get(&client->dev, "vdd");
> + bu21029->vdd = devm_regulator_get(dev, "vdd");
> if (IS_ERR(bu21029->vdd))
> - return dev_err_probe(&client->dev, PTR_ERR(bu21029->vdd),
> + return dev_err_probe(dev, PTR_ERR(bu21029->vdd),
> "failed to acquire 'vdd' supply\n");
>
> - bu21029->reset_gpios = devm_gpiod_get_optional(&client->dev,
> - "reset", GPIOD_OUT_HIGH);
> + bu21029->reset_gpios = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(bu21029->reset_gpios))
> - return dev_err_probe(&client->dev, PTR_ERR(bu21029->reset_gpios),
> + return dev_err_probe(dev, PTR_ERR(bu21029->reset_gpios),
> "failed to acquire 'reset' gpio\n");
>
> - in_dev = devm_input_allocate_device(&client->dev);
> + in_dev = devm_input_allocate_device(dev);
> if (!in_dev) {
> - dev_err(&client->dev, "unable to allocate input device\n");
> + dev_err(dev, "unable to allocate input device\n");
> return -ENOMEM;
> }
>
> @@ -394,19 +391,17 @@ static int bu21029_probe(struct i2c_client *client,
> input_set_drvdata(in_dev, bu21029);
>
> irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
> - error = devm_request_threaded_irq(&client->dev, client->irq,
> - NULL, bu21029_touch_soft_irq,
> - IRQF_ONESHOT, DRIVER_NAME, bu21029);
> + error = devm_request_threaded_irq(dev, client->irq, NULL,
> + bu21029_touch_soft_irq, IRQF_ONESHOT,
> + DRIVER_NAME, bu21029);
> if (error) {
> - dev_err(&client->dev,
> - "unable to request touch irq: %d\n", error);
> + dev_err(dev, "unable to request touch irq: %d\n", error);
> return error;
> }
>
> error = input_register_device(in_dev);
> if (error) {
> - dev_err(&client->dev,
> - "unable to register input device: %d\n", error);
> + dev_err(dev, "unable to register input device: %d\n", error);
> return error;
> }
>
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
