On 5/4/20 7:14 AM, michaelsh@xxxxxxxxxxxx wrote: > From: Michael Shych <michaelsh@xxxxxxxxxxxx> > > New programmable logic device can have watchdog type 3 implementation. > It's same as Type 2 with extended maximum timeout period. > Maximum timeout is up-to 65535 sec. > Type 3 HW watchdog implementation can exist on all Mellanox systems. > It is differentiated by WD capability bit. > > Signed-off-by: Michael Shych <michaelsh@xxxxxxxxxxxx> > Reviewed-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > v1-v2: > Make changes pointed out by Guenter: > -Simplify bit operations > -Consistency in registers access > -Don't check irrelevant return code > --- > v2-v3 > Remove unnecessary cpu_to_le16 and vice versa conversions > --- > drivers/watchdog/mlx_wdt.c | 73 +++++++++++++++++++++++++++++++++++++++------- > 1 file changed, 62 insertions(+), 11 deletions(-) > > diff --git a/drivers/watchdog/mlx_wdt.c b/drivers/watchdog/mlx_wdt.c > index 03b9ac4b99af..54193369e85c 100644 > --- a/drivers/watchdog/mlx_wdt.c > +++ b/drivers/watchdog/mlx_wdt.c > @@ -21,6 +21,7 @@ > #define MLXREG_WDT_CLOCK_SCALE 1000 > #define MLXREG_WDT_MAX_TIMEOUT_TYPE1 32 > #define MLXREG_WDT_MAX_TIMEOUT_TYPE2 255 > +#define MLXREG_WDT_MAX_TIMEOUT_TYPE3 65535 > #define MLXREG_WDT_MIN_TIMEOUT 1 > #define MLXREG_WDT_OPTIONS_BASE (WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | \ > WDIOF_SETTIMEOUT) > @@ -49,6 +50,7 @@ struct mlxreg_wdt { > int tleft_idx; > int ping_idx; > int reset_idx; > + int regmap_val_sz; > enum mlxreg_wdt_type wdt_type; > }; > > @@ -111,7 +113,8 @@ static int mlxreg_wdt_set_timeout(struct watchdog_device *wdd, > u32 regval, set_time, hw_timeout; > int rc; > > - if (wdt->wdt_type == MLX_WDT_TYPE1) { > + switch (wdt->wdt_type) { > + case MLX_WDT_TYPE1: > rc = regmap_read(wdt->regmap, reg_data->reg, ®val); > if (rc) > return rc; > @@ -120,14 +123,32 @@ static int mlxreg_wdt_set_timeout(struct watchdog_device *wdd, > regval = (regval & reg_data->mask) | hw_timeout; > /* Rowndown to actual closest number of sec. */ > set_time = BIT(hw_timeout) / MLXREG_WDT_CLOCK_SCALE; > - } else { > + rc = regmap_write(wdt->regmap, reg_data->reg, regval); > + break; > + case MLX_WDT_TYPE2: > + set_time = timeout; > + rc = regmap_write(wdt->regmap, reg_data->reg, timeout); > + break; > + case MLX_WDT_TYPE3: > + /* WD_TYPE3 has 2B set time register */ > set_time = timeout; > - regval = timeout; > + if (wdt->regmap_val_sz == 1) { > + regval = timeout & 0xff; > + rc = regmap_write(wdt->regmap, reg_data->reg, regval); > + if (!rc) { > + regval = (timeout & 0xff00) >> 8; > + rc = regmap_write(wdt->regmap, > + reg_data->reg + 1, regval); > + } > + } else { > + rc = regmap_write(wdt->regmap, reg_data->reg, timeout); > + } > + break; > + default: > + return -EINVAL; > } > > wdd->timeout = set_time; > - rc = regmap_write(wdt->regmap, reg_data->reg, regval); > - > if (!rc) { > /* > * Restart watchdog with new timeout period > @@ -147,10 +168,25 @@ static unsigned int mlxreg_wdt_get_timeleft(struct watchdog_device *wdd) > { > struct mlxreg_wdt *wdt = watchdog_get_drvdata(wdd); > struct mlxreg_core_data *reg_data = &wdt->pdata->data[wdt->tleft_idx]; > - u32 regval; > + u32 regval, msb, lsb; > int rc; > > - rc = regmap_read(wdt->regmap, reg_data->reg, ®val); > + if (wdt->wdt_type == MLX_WDT_TYPE2) { > + rc = regmap_read(wdt->regmap, reg_data->reg, ®val); > + } else { > + /* WD_TYPE3 has 2 byte timeleft register */ > + if (wdt->regmap_val_sz == 1) { > + rc = regmap_read(wdt->regmap, reg_data->reg, &lsb); > + if (!rc) { > + rc = regmap_read(wdt->regmap, > + reg_data->reg + 1, &msb); > + regval = (msb & 0xff) << 8 | (lsb & 0xff); > + } > + } else { > + rc = regmap_read(wdt->regmap, reg_data->reg, ®val); > + } > + } > + > /* Return 0 timeleft in case of failure register read. */ > return rc == 0 ? regval : 0; > } > @@ -212,13 +248,23 @@ static void mlxreg_wdt_config(struct mlxreg_wdt *wdt, > wdt->wdd.info = &mlxreg_wdt_aux_info; > > wdt->wdt_type = pdata->version; > - if (wdt->wdt_type == MLX_WDT_TYPE2) { > - wdt->wdd.ops = &mlxreg_wdt_ops_type2; > - wdt->wdd.max_timeout = MLXREG_WDT_MAX_TIMEOUT_TYPE2; > - } else { > + switch (wdt->wdt_type) { > + case MLX_WDT_TYPE1: > wdt->wdd.ops = &mlxreg_wdt_ops_type1; > wdt->wdd.max_timeout = MLXREG_WDT_MAX_TIMEOUT_TYPE1; > + break; > + case MLX_WDT_TYPE2: > + wdt->wdd.ops = &mlxreg_wdt_ops_type2; > + wdt->wdd.max_timeout = MLXREG_WDT_MAX_TIMEOUT_TYPE2; > + break; > + case MLX_WDT_TYPE3: > + wdt->wdd.ops = &mlxreg_wdt_ops_type2; > + wdt->wdd.max_timeout = MLXREG_WDT_MAX_TIMEOUT_TYPE3; > + break; > + default: > + break; > } > + > wdt->wdd.min_timeout = MLXREG_WDT_MIN_TIMEOUT; > } > > @@ -249,6 +295,11 @@ static int mlxreg_wdt_probe(struct platform_device *pdev) > > wdt->wdd.parent = dev; > wdt->regmap = pdata->regmap; > + rc = regmap_get_val_bytes(wdt->regmap); > + if (rc < 0) > + return -EINVAL; > + > + wdt->regmap_val_sz = rc; > mlxreg_wdt_config(wdt, pdata); > > if ((pdata->features & MLXREG_CORE_WD_FEATURE_NOWAYOUT)) >