These come from a newer version of cm32181.c, which is floating around the net, with a copyright of: * Copyright (C) 2014 Capella Microsystems Inc. * Author: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2, as published * by the Free Software Foundation. Note that this removes the bogus CM32181_CMD_ALS_ENABLE define, there is no enable bit, only a disable bit and enabled is the absence of being disabled. This is a preparation patch for adding support for the older CM3218 model of the light sensor. Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/iio/light/cm32181.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c index 5ca8bbf6667c..6fc0a753c499 100644 --- a/drivers/iio/light/cm32181.c +++ b/drivers/iio/light/cm32181.c @@ -18,6 +18,9 @@ /* Registers Address */ #define CM32181_REG_ADDR_CMD 0x00 +#define CM32181_REG_ADDR_WH 0x01 +#define CM32181_REG_ADDR_WL 0x02 +#define CM32181_REG_ADDR_TEST 0x03 #define CM32181_REG_ADDR_ALS 0x04 #define CM32181_REG_ADDR_STATUS 0x06 #define CM32181_REG_ADDR_ID 0x07 @@ -26,9 +29,13 @@ #define CM32181_CONF_REG_NUM 0x01 /* CMD register */ -#define CM32181_CMD_ALS_ENABLE 0x00 -#define CM32181_CMD_ALS_DISABLE 0x01 -#define CM32181_CMD_ALS_INT_EN 0x02 +#define CM32181_CMD_ALS_DISABLE BIT(0) +#define CM32181_CMD_ALS_INT_EN BIT(1) +#define CM32181_CMD_ALS_THRES_WINDOW BIT(2) + +#define CM32181_CMD_ALS_PERS_SHIFT 4 +#define CM32181_CMD_ALS_PERS_MASK (0x03 << CM32181_CMD_ALS_PERS_SHIFT) +#define CM32181_CMD_ALS_PERS_DEFAULT (0x01 << CM32181_CMD_ALS_PERS_SHIFT) #define CM32181_CMD_ALS_IT_SHIFT 6 #define CM32181_CMD_ALS_IT_MASK (0x0F << CM32181_CMD_ALS_IT_SHIFT) @@ -82,7 +89,7 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181) return -ENODEV; /* Default Values */ - cm32181->conf_regs[CM32181_REG_ADDR_CMD] = CM32181_CMD_ALS_ENABLE | + cm32181->conf_regs[CM32181_REG_ADDR_CMD] = CM32181_CMD_ALS_IT_DEFAULT | CM32181_CMD_ALS_SM_DEFAULT; cm32181->calibscale = CM32181_CALIBSCALE_DEFAULT; -- 2.26.0