Re: [RFC v2 3/9] thermal: Properly handle mode values in .set_mode()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrzej,

you can drop this patch. It is not useful as the caller checks the
correctness of the values in the patch 4/9.

Moreover the patch is bogus because it returns before releasing the lock.

On 14/04/2020 20:00, Andrzej Pietrasiewicz wrote:
> Allow only THERMAL_DEVICE_ENABLED and THERMAL_DEVICE_DISABLED as valid
> states to transition to.




> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
> ---
>  drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 8 ++++++--
>  drivers/platform/x86/acerhdf.c                     | 4 ++++
>  drivers/thermal/imx_thermal.c                      | 4 +++-
>  drivers/thermal/intel/intel_quark_dts_thermal.c    | 5 ++++-
>  drivers/thermal/of-thermal.c                       | 4 +++-
>  5 files changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> index ce0a6837daa3..cd435ca7adbe 100644
> --- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> +++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
> @@ -296,8 +296,10 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
>  
>  	if (mode == THERMAL_DEVICE_ENABLED)
>  		tzdev->polling_delay = thermal->polling_delay;
> -	else
> +	else if (mode == THERMAL_DEVICE_DISABLED)
>  		tzdev->polling_delay = 0;
> +	else
> +		return -EINVAL;
>  
>  	mutex_unlock(&tzdev->lock);
>  
> @@ -486,8 +488,10 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
>  
>  	if (mode == THERMAL_DEVICE_ENABLED)
>  		tzdev->polling_delay = thermal->polling_delay;
> -	else
> +	else if (mode == THERMAL_DEVICE_DISABLED)
>  		tzdev->polling_delay = 0;
> +	else
> +		return -EINVAL;
>  
>  	mutex_unlock(&tzdev->lock);
>  
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index 8cc86f4e3ac1..d5188c1d688b 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -431,6 +431,10 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal,
>  static int acerhdf_set_mode(struct thermal_zone_device *thermal,
>  			    enum thermal_device_mode mode)
>  {
> +	if (mode != THERMAL_DEVICE_DISABLED &&
> +	    mode != THERMAL_DEVICE_ENABLED)
> +		return -EINVAL;
> +
>  	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
>  		acerhdf_revert_to_bios_mode();
>  	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index e761c9b42217..36b1924f1938 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -361,7 +361,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
>  			data->irq_enabled = true;
>  			enable_irq(data->irq);
>  		}
> -	} else {
> +	} else if (mode == THERMAL_DEVICE_DISABLED) {
>  		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
>  			     soc_data->measure_temp_mask);
>  		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
> @@ -374,6 +374,8 @@ static int imx_set_mode(struct thermal_zone_device *tz,
>  			disable_irq(data->irq);
>  			data->irq_enabled = false;
>  		}
> +	} else {
> +		return -EINVAL;
>  	}
>  
>  	data->mode = mode;
> diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
> index d704fc104cfd..11d7db895125 100644
> --- a/drivers/thermal/intel/intel_quark_dts_thermal.c
> +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
> @@ -325,8 +325,11 @@ static int sys_set_mode(struct thermal_zone_device *tzd,
>  	mutex_lock(&dts_update_mutex);
>  	if (mode == THERMAL_DEVICE_ENABLED)
>  		ret = soc_dts_enable(tzd);
> -	else
> +	else if (mode == THERMAL_DEVICE_DISABLED)
>  		ret = soc_dts_disable(tzd);
> +	else
> +		return -EINVAL;
> +
>  	mutex_unlock(&dts_update_mutex);
>  
>  	return ret;
> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
> index 874a47d6923f..36bebf623980 100644
> --- a/drivers/thermal/of-thermal.c
> +++ b/drivers/thermal/of-thermal.c
> @@ -289,9 +289,11 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
>  	if (mode == THERMAL_DEVICE_ENABLED) {
>  		tz->polling_delay = data->polling_delay;
>  		tz->passive_delay = data->passive_delay;
> -	} else {
> +	} else if (mode == THERMAL_DEVICE_DISABLED) {
>  		tz->polling_delay = 0;
>  		tz->passive_delay = 0;
> +	} else {
> +		return -EINVAL;
>  	}
>  
>  	mutex_unlock(&tz->lock);
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux