On Wed, Oct 23, 2019 at 9:53 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> From: Daniel Gorbea Ainz <danielgorbea@xxxxxxxxxxx>
>
> Add touchscreen platform data for the Schneider SCT101CTM tablet
Thanks, now patchwork sees it.
> Signed-off-by: Daniel Gorbea <danielgorbea@xxxxxxxxxxx>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
I'm not sure you need to put Rb when you have your SoB.
Do you think it's fine if I remove Rb when applying?
> ---
> hdegoede: Resend from my email address as vger.kernel.org does not like
> Daniel's emails
> ---
> drivers/platform/x86/touchscreen_dmi.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
> index 8bfef880e216..ba494ace83d4 100644
> --- a/drivers/platform/x86/touchscreen_dmi.c
> +++ b/drivers/platform/x86/touchscreen_dmi.c
> @@ -549,6 +549,24 @@ static const struct ts_dmi_data pov_mobii_wintab_p1006w_v10_data = {
> .properties = pov_mobii_wintab_p1006w_v10_props,
> };
>
> +static const struct property_entry schneider_sct101ctm_props[] = {
> + PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
> + PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
> + PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
> + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
> + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
> + PROPERTY_ENTRY_STRING("firmware-name",
> + "gsl1680-schneider-sct101ctm.fw"),
> + PROPERTY_ENTRY_U32("silead,max-fingers", 10),
> + PROPERTY_ENTRY_BOOL("silead,home-button"),
> + { }
> +};
> +
> +static const struct ts_dmi_data schneider_sct101ctm_data = {
> + .acpi_name = "MSSL1680:00",
> + .properties = schneider_sct101ctm_props,
> +};
> +
> static const struct property_entry teclast_x3_plus_props[] = {
> PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
> PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
> @@ -968,6 +986,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
> DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
> },
> },
> + {
> + /* Schneider SCT101CTM */
> + .driver_data = (void *)&schneider_sct101ctm_data,
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
> + },
> + },
> {
> /* Teclast X3 Plus */
> .driver_data = (void *)&teclast_x3_plus_data,
> --
> 2.23.0
>
--
With Best Regards,
Andy Shevchenko
