Supplying also external devices, the DisplayPort connector
and the USB role switch, software fwnodes. After this the
driver has access to all the components tied to the USB
Type-C connector and can start creating software node
references to actually associate them with the USB Type-C
connector device.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/intel_cht_int33fe.c | 128 ++++++++++++++++++++++-
1 file changed, 125 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index dcfe47baff72..9e1848e0343d 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -21,6 +21,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
@@ -32,6 +33,8 @@ enum {
INT33FE_NODE_FUSB302,
INT33FE_NODE_MAX17047,
INT33FE_NODE_PI3USB30532,
+ INT33FE_NODE_DISPLAYPORT,
+ INT33FE_NODE_ROLE_SWITCH,
INT33FE_NODE_USB_CONNECTOR,
INT33FE_NODE_MAX,
};
@@ -42,6 +45,9 @@ struct cht_int33fe_data {
struct i2c_client *pi3usb30532;
/* Contain a list-head must be per device */
struct device_connection connections[4];
+
+ struct fwnode_handle *dp;
+ struct fwnode_handle *mux;
};
/*
@@ -110,10 +116,126 @@ static const struct software_node nodes[] = {
{ "fusb302", NULL, fusb302_props },
{ "max17047", NULL, max17047_props },
{ "pi3usb30532" },
+ { "displayport" },
+ { "usb-role-switch" },
{ "connector", &nodes[0], usb_connector_props },
{ }
};
+static int cht_int33fe_setup_mux(struct cht_int33fe_data *data)
+{
+ struct fwnode_handle *fwnode;
+ struct device *dev;
+ struct device *p;
+
+ fwnode = software_node_fwnode(&nodes[INT33FE_NODE_ROLE_SWITCH]);
+ if (!fwnode)
+ return -ENODEV;
+
+ /* First finding the platform device */
+ p = bus_find_device_by_name(&platform_bus_type, NULL,
+ "intel_xhci_usb_sw");
+ if (!p)
+ return -EPROBE_DEFER;
+
+ /* Then the mux child device */
+ dev = device_find_child_by_name(p, "intel_xhci_usb_sw-role-switch");
+ put_device(p);
+ if (!dev)
+ return -EPROBE_DEFER;
+
+ /* If there already is a node for the mux, using that one. */
+ if (dev->fwnode)
+ fwnode_remove_software_node(fwnode);
+ else
+ dev->fwnode = fwnode;
+
+ data->mux = fwnode_handle_get(dev->fwnode);
+ put_device(dev);
+
+ return 0;
+}
+
+static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
+{
+ struct fwnode_handle *fwnode;
+ struct pci_dev *pdev;
+
+ fwnode = software_node_fwnode(&nodes[INT33FE_NODE_DISPLAYPORT]);
+ if (!fwnode)
+ return -ENODEV;
+
+ /* First let's find the GPU PCI device */
+ pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL);
+ if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) {
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ /* Then the DP child device node */
+ data->dp = device_get_named_child_node(&pdev->dev, "DD02");
+ pci_dev_put(pdev);
+ if (!data->dp)
+ return -ENODEV;
+
+ fwnode->secondary = ERR_PTR(-ENODEV);
+ data->dp->secondary = fwnode;
+
+ return 0;
+}
+
+static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
+{
+ software_node_unregister_nodes(nodes);
+
+ if (data->mux) {
+ fwnode_handle_put(data->mux);
+ data->mux = NULL;
+ }
+
+ if (data->dp) {
+ data->dp->secondary = NULL;
+ fwnode_handle_put(data->dp);
+ data->dp = NULL;
+ }
+}
+
+static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
+{
+ int ret;
+
+ ret = software_node_register_nodes(nodes);
+ if (ret)
+ return ret;
+
+ /* The devices that are not created in this driver need extra steps. */
+
+ /*
+ * There is no ACPI device node for the USB role mux, so we need to find
+ * the mux device and assign our node directly to it. That means we
+ * depend on the mux driver. This function will return -PROBE_DEFER
+ * until the mux device is registered.
+ */
+ ret = cht_int33fe_setup_mux(data);
+ if (ret)
+ goto err_remove_nodes;
+
+ /*
+ * The DP connector does have ACPI device node. In this case we can just
+ * find that ACPI node and assign our node as the secondary node to it.
+ */
+ ret = cht_int33fe_setup_dp(data);
+ if (ret)
+ goto err_remove_nodes;
+
+ return 0;
+
+err_remove_nodes:
+ cht_int33fe_remove_nodes(data);
+
+ return ret;
+}
+
static int
cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
{
@@ -212,7 +334,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
- ret = software_node_register_nodes(nodes);
+ ret = cht_int33fe_add_nodes(data);
if (ret)
return ret;
@@ -281,7 +403,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)
device_connections_remove(data->connections);
out_remove_nodes:
- software_node_unregister_nodes(nodes);
+ cht_int33fe_remove_nodes(data);
return ret;
}
@@ -295,7 +417,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
i2c_unregister_device(data->max17047);
device_connections_remove(data->connections);
- software_node_unregister_nodes(nodes);
+ cht_int33fe_remove_nodes(data);
return 0;
}
--
2.20.1
