On Tue, Nov 27, 2018 at 3:25 PM Florian Eckert <fe@xxxxxxxxxx> wrote:
>
> Add a platform/x86 device "gpio-keys-polled" for the frontpanel reset button.
> This device uses the gpio-apu driver for APU borads from PC Engines.
Yep, and actually this one has to instantiate a GPIO.
>
> Signed-off-by: Florian Eckert <fe@xxxxxxxxxx>
> ---
> drivers/platform/x86/Kconfig | 11 +++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/pcengines-apu-platform.c | 114 ++++++++++++++++++++++++++
> 3 files changed, 126 insertions(+)
> create mode 100644 drivers/platform/x86/pcengines-apu-platform.c
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 54f6a40c75c6..5cd27c2174cb 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1288,6 +1288,17 @@ config INTEL_ATOMISP2_PM
> To compile this driver as a module, choose M here: the module
> will be called intel_atomisp2_pm.
>
> +config PCENGINES_APU_PLATFORM
> + bool "PCEngines APU System Support"
> + depends on X86_64 && DMI && GPIOLIB
> + help
> + This option enables system support for the PCEngines APU platform.
> + At present this just adds the GPIO reset button platform device on
> + APU2/APU3 boards.
> +
> + Note: You must still enable the drivers for GPIO and LED support
> + (GPIO_APU & LEDS_APU) to actually use the LEDs and the GPIOs.
> +
> endif # X86_PLATFORM_DEVICES
>
> config PMC_ATOM
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 39ae94135406..f899cc4c6b48 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -96,3 +96,4 @@ obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
> obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
> obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
> obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
> +obj-$(CONFIG_PCENGINES_APU_PLATFORM) += pcengines-apu-platform.o
> diff --git a/drivers/platform/x86/pcengines-apu-platform.c b/drivers/platform/x86/pcengines-apu-platform.c
> new file mode 100644
> index 000000000000..3bfbaa93cb11
> --- /dev/null
> +++ b/drivers/platform/x86/pcengines-apu-platform.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * System Specific setup for PC-Engines APU2/APU3 devices
> + *
> + * Copyright (C) 2018 Florian Eckert <fe@xxxxxxxxxx>
> + */
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +static const struct dmi_system_id apu2_gpio_dmi_table[] __initconst = {
> + /* PC Engines APU2 with "Legacy" bios < 4.0.8 */
> + {
> + .ident = "apu2",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "APU2")
> + }
> + },
> + /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */
> + {
> + .ident = "apu2",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "apu2")
> + }
> + },
> + /* PC Engines APU2 with "Mainline" bios */
> + {
> + .ident = "apu2",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
> + }
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(dmi, apu2_gpio_dmi_table);
> +
> +static const struct dmi_system_id apu3_gpio_dmi_table[] __initconst = {
> + /* PC Engines APU3 with "Legacy" bios < 4.0.8 */
> + {
> + .ident = "apu3",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "APU3")
> + }
> + },
> + /* PC Engines APU3 with "Legacy" bios >= 4.0.8 */
> + {
> + .ident = "apu3",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "apu3")
> + }
> + },
> + /* PC Engines APU3 with "Mainline" bios */
> + {
> + .ident = "apu3",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
> + DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
> + }
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(dmi, apu3_gpio_dmi_table);
> +
> +
> +static struct gpio_keys_button apu_gpio_buttons[] = {
> + {
> + .code = KEY_RESTART,
> + .gpio = 20,
> + .active_low = 1,
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .debounce_interval = 60,
> + }
> +};
> +
> +static struct gpio_keys_platform_data apu_buttons_data = {
> + .buttons = apu_gpio_buttons,
> + .nbuttons = ARRAY_SIZE(apu_gpio_buttons),
> + .poll_interval = 20,
> +};
> +
> +static struct platform_device apu_button_dev = {
> + .name = "gpio-keys-polled",
> + .id = 1,
> + .dev = {
> + .platform_data = &apu_buttons_data,
> + }
> +};
> +
> +static int __init apu_init(void)
> +{
> + if (!(dmi_check_system(apu2_gpio_dmi_table)) &&
> + !(dmi_check_system(apu3_gpio_dmi_table))) {
> + return -ENODEV;
> + }
> +
> + return platform_device_register(&apu_button_dev);
> +}
> +
> +static void __exit apu_exit(void)
> +{
> + platform_device_unregister(&apu_button_dev);
> +}
> +
> +module_init(apu_init);
> +module_exit(apu_exit);
> --
> 2.11.0
>
--
With Best Regards,
Andy Shevchenko
