Hi,
On 20-11-18 16:59, Andy Shevchenko wrote:
Currently i2c-multi-instantiate driver does not support the case
of INT3515 USB PD device, where:
- Interrupt() is used instead of GpioInt()
- All slaves may be the same from IP point of view
- There can be variadic amount of slaves
This series is addressing all above.
Notes:
- series has been smoke tested (Heikki would do BAT or more) on Coffee Lake system
- patch for BOSC0200 might be considered as RFC since the modalias potential issue
Yeah the BOSC0200 patch cannot go upstream as is, that will break the
orientation quirks in hwdb on:
[hans@shalem systemd]$ grep BOSC0200 hwdb/60-sensor.hwdb | wc -l
17
[hans@shalem systemd]$
At least 17 different models laptops / 2-in-1s
The idea is to push this either through PDx86 tree (needs Rafael's ACKs) or ACPI.
In any case it needs tags from Heikki, Hans, Mika, Wolfram and Jonathan.
Patches 1-5, 7-13 and 15 are:
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
I will send separate replies to:
[PATCH v1 06/15] i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
[PATCH v1 14/15] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
Which are both a NACK from me (in their current state) because they both will
cause regressions.
Regards,
Hans
Testing and comments are warmly welcome.
Andy Shevchenko (15):
platform/x86: intel_cht_int33fe: Remove duplicate NULL check
platform/x86: intel_cht_int33fe: Accept errors of
i2c_acpi_new_device()
platform/x86: i2c-multi-instantiate: Accept errors of
i2c_acpi_new_device()
platform/x86: i2c-mutli-instantiate: Defer probe when no adapter found
i2c: acpi: Return error pointers from i2c_acpi_new_device()
i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
platform/x86: i2c-multi-instantiate: Allow to have same slaves
ACPI / scan: Create platform device for INT3515 ACPI nodes
ACPI / scan: Create platform device for BOSC0200 ACPI nodes
iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
drivers/acpi/scan.c | 2 +
drivers/i2c/i2c-core-acpi.c | 43 +++++----
drivers/iio/accel/bmc150-accel-i2c.c | 1 -
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 16 ++--
drivers/platform/x86/i2c-multi-instantiate.c | 99 ++++++++++++++++----
drivers/platform/x86/intel_cht_int33fe.c | 34 +++++--
drivers/usb/typec/tps6598x.c | 8 +-
include/linux/acpi.h | 11 +++
8 files changed, 158 insertions(+), 56 deletions(-)
