Shift by one the registers for tachometers (7 - 12).
This fix is relevant for the same new systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
This fix is necessary, because register used before for tachometer 7
has been than reserved for the second PWM for newer systems, which are
not supported yet in mlx-platform driver. So registers of tachometers
7-12 have been shifted by one.
Fixes: 0378123c5800 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
---
v1->v2:
Comments pointed out by Andy:
- Explain why this change is safe.
---
drivers/platform/x86/mlx-platform.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index cdf4498..7e92264 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -86,12 +86,12 @@
#define MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET 0xe7
#define MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET 0xe8
#define MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET 0xe9
-#define MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET 0xea
-#define MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET 0xeb
-#define MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET 0xec
-#define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET 0xed
-#define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET 0xee
-#define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET 0xef
+#define MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET 0xeb
+#define MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET 0xec
+#define MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET 0xed
+#define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET 0xee
+#define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET 0xef
+#define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET 0xf0
#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb
#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda
--
2.1.4
