Assigning the mux to the USB Type-C port on top of fusb302.
That will prepare this driver for the change in the USB
Type-C class code, where the class driver will assume the
muxes to be always assigned to the ports and not the
controllers.
Once the USB Type-C class driver has been updated, the
connections between the mux and fusb302 can be dropped.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/platform/x86/intel_cht_int33fe.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index f8c881f871f9..eb0dd687ee54 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -34,7 +34,7 @@ struct cht_int33fe_data {
struct i2c_client *fusb302;
struct i2c_client *pi3usb30532;
/* Contain a list-head must be per device */
- struct device_connection connections[4];
+ struct device_connection connections[6];
};
/*
@@ -184,6 +184,13 @@ static int cht_int33fe_probe(struct i2c_client *client)
data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
data->connections[2].id = "usb-role-switch";
+ data->connections[3].endpoint[0] = "port0";
+ data->connections[3].endpoint[1] = "i2c-pi3usb30532";
+ data->connections[3].id = "typec-switch";
+ data->connections[4].endpoint[0] = "port0";
+ data->connections[4].endpoint[1] = "i2c-pi3usb30532";
+ data->connections[4].id = "idff01m01";
+
device_connections_add(data->connections);
memset(&board_info, 0, sizeof(board_info));
--
2.18.0
