Add documentation for mlxreg-io driver sysfs interfaces for user space access to system's power resets control, reset causes monitoring, programmable devices version reading and devices selection control. Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx> --- v4: Comments pointed out by Greg: Add Documentation/ABI/ entries for the new sysfs files. --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 51 +++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-mlxreg-io diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io new file mode 100644 index 0000000..fcd659e --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -0,0 +1,51 @@ +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + cause_aux_pwr_or_ref + cause_asic_thermal + cause_hotswap_or_wd + cause_fw_reset + cause_long_pb + cause_main_pwr_fail + cause_short_pb + cause_sw_reset +Date: May 2018 +KernelVersion: 4.18 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: power + auxiliary outage or power refresh, ASIC thermal shutdown, + hotswap or watchdog, firmware reset, long press power button, + short press power button, software reset. Value 1 in file means + this is reset cause, 0 - otherwise. Only one of the above + causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + cpld1_version + cpld2_version +Date: May 2018 +KernelVersion: 4.18 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on carrier and switch boards. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio +Date: May 2018 +KernelVersion: 4.18 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows iio devices selection. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle +Date: May 2018 +KernelVersion: 4.18 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files allow assert system's power cycling and PS units + on/off switching. + + The files are write only. -- 2.1.4
