> -----Original Message----- > From: Greg KH [mailto:gregkh@xxxxxxxxxxxxxxxxxxx] > Sent: Sunday, May 27, 2018 6:14 PM > To: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > Cc: dvhart@xxxxxxxxxxxxx; andy.shevchenko@xxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx; jiri@xxxxxxxxxxx; > Michael Shych <michaelsh@xxxxxxxxxxxx>; ivecera@xxxxxxxxxx > Subject: Re: [PATCH v3 6/7] platform/mellanox: Introduce support for Mellanox > register access driver > > On Sun, May 27, 2018 at 04:47:43PM +0000, Vadim Pasternak wrote: > > Introduce new Mellanox platform driver to allow access to Mellanox > > programmable device register space trough sysfs interface. > > The driver purpose is to provide sysfs interface for user space for > > the registers essential for system control and monitoring. > > The sets of registers for sysfs access are supposed to be defined per > > system type bases and include the registers related to system resets > > operation, system reset causes monitoring and some kinds of mux selection. > > > > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx> > > --- > > v1->v2: > > Changed added by Vadim: > > - Change ---help--- to help in Kconfig, according to new > > requirements; > > v2->v3: > > Comments pointed out by Darren: > > - Remove conditional assignment per attribute mode type, because mode > > will guard against not permitted access. > > Verified by Vadim. > > --- > > drivers/platform/mellanox/Kconfig | 11 ++ > > drivers/platform/mellanox/Makefile | 1 + > > drivers/platform/mellanox/mlxreg-io.c | 203 > > ++++++++++++++++++++++++++++++++++ > > 3 files changed, 215 insertions(+) > > create mode 100644 drivers/platform/mellanox/mlxreg-io.c > > > > diff --git a/drivers/platform/mellanox/Kconfig > > b/drivers/platform/mellanox/Kconfig > > index 591bccd..ddfae9fc 100644 > > --- a/drivers/platform/mellanox/Kconfig > > +++ b/drivers/platform/mellanox/Kconfig > > @@ -23,4 +23,15 @@ config MLXREG_HOTPLUG > > This driver handles hot-plug events for the power suppliers, power > > cables and fans on the wide range Mellanox IB and Ethernet systems. > > > > +config MLXREG_IO > > + tristate "Mellanox platform register access driver support" > > + depends on REGMAP > > + depends on HWMON > > + help > > + This driver allows access to Mellanox programmable device register > > + space trough sysfs interface. The sets of registers for sysfs access > > + are defined per system type bases and includes the registers related > > + to system resets operation, system reset causes monitoring and some > > + kinds of mux selection. > > No Documentation/ABI/ entries for these new sysfs files? Not good :( > Thanks Greg for your comment. Should I call doc file like: Documentation/ABI/stable/sysfs-driver-mlxreg-io ? > greg k-h
