On Sat, Dec 02, 2017 at 09:45:33PM +0800, Jiaxun Yang wrote:
> To deal with checkpatch warnings:
> WARNING: Prefer kstrto<type> to single variable sscanf
>
> WARNING: Missing a blank line after declarations
>
> WARNING: Block comments use a trailing */ on a separate line
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> ---
> drivers/platform/x86/ideapad-laptop.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
> index 1072b24370ac..924b07f7db06 100644
> --- a/drivers/platform/x86/ideapad-laptop.c
> +++ b/drivers/platform/x86/ideapad-laptop.c
> @@ -406,12 +406,14 @@ static ssize_t store_ideapad_cam(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t count)
> {
> - int ret, state;
> + int ret, state, rc;
> struct ideapad_private *priv = dev_get_drvdata(dev);
>
> + rc = kstrtoint(buf, 0, &state);
> +
> if (!count)
> return 0;
Better to keep the string to int here after the check for !count. No reason I
can see to move it above.
> - if (sscanf(buf, "%i", &state) != 1)
> + if (rc != 0)
> return -EINVAL;
> ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state);
> if (ret < 0)
> @@ -437,12 +439,14 @@ static ssize_t store_ideapad_fan(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t count)
> {
> - int ret, state;
> + int ret, state, rc;
> struct ideapad_private *priv = dev_get_drvdata(dev);
>
> + rc = kstrtoint(buf, 0, &state);
> +
Same here
> if (!count)
> return 0;
> - if (sscanf(buf, "%i", &state) != 1)
> + if (rc != 0)
And in both cases, kstrtoint can be used within the if condition, avoiding the
need for a new rc variable.
> return -EINVAL;
> if (state < 0 || state > 4 || state == 3)
> return -EINVAL;
> @@ -541,6 +545,7 @@ static umode_t ideapad_is_visible(struct kobject *kobj,
> supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg));
> else if (attr == &dev_attr_fan_mode.attr) {
> unsigned long value;
> +
> supported = !read_ec_data(priv->adev->handle, VPCCMD_R_FAN,
> &value);
> } else if (attr == &dev_attr_conservation_mode.attr) {
> @@ -880,11 +885,14 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv)
>
> /* Without reading from EC touchpad LED doesn't switch state */
> if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) {
> - /* Some IdeaPads don't really turn off touchpad - they only
> + /*
> + * Some IdeaPads don't really turn off touchpad - they only
> * switch the LED state. We (de)activate KBC AUX port to turn
> * touchpad off and on. We send KEY_TOUCHPAD_OFF and
> - * KEY_TOUCHPAD_ON to not to get out of sync with LED */
> + * KEY_TOUCHPAD_ON to not to get out of sync with LED
> + */
> unsigned char param;
> +
> i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE :
> I8042_CMD_AUX_DISABLE);
> ideapad_input_report(priv, value ? 67 : 66);
> --
> 2.14.1
>
>
--
Darren Hart
VMware Open Source Technology Center
