Added support for HP ProBook 440 G4 laptops by including the accelerometer orientation quirk for that device. Testing was performed based on the axis orientation guidelines here: https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d which states "If the left side is elevated, X increases (becomes positive)" When tested, on lifting the left edge, x values became increasingly negative thus indicating an inverted x-axis on the installed lis3lv02d chip. This was compensated by adding an entry for this device in hp_accel.c specifying the quirk as x_inverted. The patch was tested on a ProBook 440 G4 device and x-axis as well as y and z-axis values are now generated as per spec. Signed-off-by: Osama Khan <osama.khan@xxxxxxxxxxxx> --- diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 493d8910a74e..7b12abe86b94 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left), AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd), + AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted), AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left), AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted), AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
