---
arch/x86/include/asm/intel_scu_ipc.h | 23 +-
arch/x86/platform/intel-mid/intel-mid.c | 12 +-
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/intel_scu_ipc.c | 483 +++++++++++++-------------------
drivers/rtc/rtc-mrst.c | 15 +-
drivers/watchdog/intel-mid_wdt.c | 12 +-
drivers/watchdog/intel_scu_watchdog.c | 17 +-
7 files changed, 251 insertions(+), 312 deletions(-)
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 81d3d87..5842534 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -14,9 +14,19 @@
#define IPCMSG_COLD_BOOT 0xF3
#define IPCMSG_VRTC 0xFA /* Set vRTC device */
- /* Command id associated with message IPCMSG_VRTC */
- #define IPC_CMD_VRTC_SETTIME 1 /* Set time */
- #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+
+/* Command id associated with message IPCMSG_VRTC */
+#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
+#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+
+#define INTEL_SCU_IPC_DEV "intel_scu_ipc"
+#define SCU_PARAM_LEN 2
+
+static inline void scu_cmd_init(u32 *cmd, u32 param1, u32 param2)
+{
+ cmd[0] = param1;
+ cmd[1] = param2;
+}
/* Read single register */
int intel_scu_ipc_ioread8(u16 addr, u8 *data);
@@ -45,13 +55,6 @@ int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
/* Update single register based on the mask */
int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
-/* Issue commands to the SCU with or without data */
-int intel_scu_ipc_simple_command(int cmd, int sub);
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen);
-int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen,
- u32 *out, int outlen, u32 dptr, u32 sptr);
-
/* I2C control api */
int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data);
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 12a2725..27541e9 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/export.h>
#include <linux/notifier.h>
+#include <linux/platform_data/x86/intel_ipc_dev.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -68,18 +69,23 @@ static void *(*get_intel_mid_ops[])(void) = INTEL_MID_OPS_INIT;
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
+static struct intel_ipc_dev *ipc_dev;
+
static void intel_mid_power_off(void)
{
+ u32 cmds[SCU_PARAM_LEN] = {IPCMSG_COLD_OFF, 1};
/* Shut down South Complex via PWRMU */
intel_mid_pwr_power_off();
/* Only for Tangier, the rest will ignore this command */
- intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1);
+ ipc_dev_simple_cmd(ipc_dev, cmds, SCU_PARAM_LEN);
};
static void intel_mid_reboot(void)
{
- intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+ u32 cmds[SCU_PARAM_LEN] = {IPCMSG_COLD_BOOT, 0};
+
+ ipc_dev_simple_cmd(ipc_dev, cmds, SCU_PARAM_LEN);
}
static unsigned long __init intel_mid_calibrate_tsc(void)
@@ -206,6 +212,8 @@ void __init x86_intel_mid_early_setup(void)
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
set_bit(MP_BUS_ISA, mp_bus_not_pci);
+
+ ipc_dev = intel_ipc_dev_get(INTEL_SCU_IPC_DEV);
}
/*
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 82479ca..e4e5822 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -850,6 +850,7 @@ config INTEL_VBTN
config INTEL_SCU_IPC
bool "Intel SCU IPC Support"
depends on X86_INTEL_MID
+ select REGMAP_MMIO
default y
---help---
IPC is used to bridge the communications between kernel and SCU on
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index f7cf981..78013e4 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -24,6 +24,8 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sfi.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/x86/intel_ipc_dev.h>
#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
@@ -39,6 +41,25 @@
#define IPC_CMD_PCNTRL_R 1 /* Register read */
#define IPC_CMD_PCNTRL_M 2 /* Register read-modify-write */
+/* IPC dev register offsets */
+/*
+ * IPC Read Buffer (Read Only):
+ * 16 byte buffer for receiving data from SCU, if IPC command
+ * processing results in response data
+ */
+#define IPC_DEV_SCU_RBUF_OFFSET 0x90
+#define IPC_DEV_SCU_WRBUF_OFFSET 0x80
+#define IPC_DEV_SCU_SPTR_OFFSET 0x08
+#define IPC_DEV_SCU_DPTR_OFFSET 0x0C
+#define IPC_DEV_SCU_STATUS_OFFSET 0x04
+
+/* IPC dev commands */
+/* IPC command register IOC bit */
+#define IPC_DEV_SCU_CMD_MSI BIT(8)
+#define IPC_DEV_SCU_CMD_STATUS_ERR BIT(1)
+#define IPC_DEV_SCU_CMD_STATUS_ERR_MASK GENMASK(7, 0)
+#define IPC_DEV_SCU_CMD_STATUS_BUSY BIT(0)
+
/*
* IPC register summary
*
@@ -59,6 +80,11 @@
#define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */
#define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */
#define IPC_IOC 0x100 /* IPC command register IOC bit */
+#define IPC_CMD_SIZE 16
+#define IPC_CMD_SUBCMD 12
+#define IPC_RWBUF_SIZE_DWORD 5
+#define IPC_WWBUF_SIZE_DWORD 5
+
#define PCI_DEVICE_ID_LINCROFT 0x082a
#define PCI_DEVICE_ID_PENWELL 0x080e
@@ -93,140 +119,49 @@ static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
struct intel_scu_ipc_dev {
struct device *dev;
+ struct intel_ipc_dev *ipc_dev;
void __iomem *ipc_base;
void __iomem *i2c_base;
- struct completion cmd_complete;
+ struct regmap *ipc_regs;
+ struct regmap *i2c_regs;
u8 irq_mode;
};
-static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
+static struct regmap_config ipc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+};
-/*
- * IPC Read Buffer (Read Only):
- * 16 byte buffer for receiving data from SCU, if IPC command
- * processing results in response data
- */
-#define IPC_READ_BUFFER 0x90
+static struct regmap_config i2c_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+};
+
+static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
#define IPC_I2C_CNTRL_ADDR 0
#define I2C_DATA_ADDR 0x04
-static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
-
-/*
- * Send ipc command
- * Command Register (Write Only):
- * A write to this register results in an interrupt to the SCU core processor
- * Format:
- * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
- */
-static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd)
-{
- if (scu->irq_mode) {
- reinit_completion(&scu->cmd_complete);
- writel(cmd | IPC_IOC, scu->ipc_base);
- }
- writel(cmd, scu->ipc_base);
-}
-
-/*
- * Write ipc data
- * IPC Write Buffer (Write Only):
- * 16-byte buffer for sending data associated with IPC command to
- * SCU. Size of the data is specified in the IPC_COMMAND_REG register
- */
-static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset)
-{
- writel(data, scu->ipc_base + 0x80 + offset);
-}
-
-/*
- * Status Register (Read Only):
- * Driver will read this register to get the ready/busy status of the IPC
- * block and error status of the IPC command that was just processed by SCU
- * Format:
- * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
- */
-static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
-{
- return __raw_readl(scu->ipc_base + 0x04);
-}
-
-/* Read ipc byte data */
-static inline u8 ipc_data_readb(struct intel_scu_ipc_dev *scu, u32 offset)
-{
- return readb(scu->ipc_base + IPC_READ_BUFFER + offset);
-}
-
-/* Read ipc u32 data */
-static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
-{
- return readl(scu->ipc_base + IPC_READ_BUFFER + offset);
-}
-
-/* Wait till scu status is busy */
-static inline int busy_loop(struct intel_scu_ipc_dev *scu)
-{
- u32 status = ipc_read_status(scu);
- u32 loop_count = 100000;
-
- /* break if scu doesn't reset busy bit after huge retry */
- while ((status & BIT(0)) && --loop_count) {
- udelay(1); /* scu processing time is in few u secods */
- status = ipc_read_status(scu);
- }
-
- if (status & BIT(0)) {
- dev_err(scu->dev, "IPC timed out");
- return -ETIMEDOUT;
- }
-
- if (status & BIT(1))
- return -EIO;
-
- return 0;
-}
-
-/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
-static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
-{
- int status;
-
- if (!wait_for_completion_timeout(&scu->cmd_complete, 3 * HZ)) {
- dev_err(scu->dev, "IPC timed out\n");
- return -ETIMEDOUT;
- }
-
- status = ipc_read_status(scu);
- if (status & BIT(1))
- return -EIO;
-
- return 0;
-}
-
-static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
-{
- return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
-}
-
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
{
struct intel_scu_ipc_dev *scu = &ipcdev;
int nc;
u32 offset = 0;
- int err;
+ int err = -EIO;
u8 cbuf[IPC_WWBUF_SIZE];
u32 *wbuf = (u32 *)&cbuf;
+ u32 cmd[SCU_PARAM_LEN] = {0};
+ /* max rbuf size is 20 bytes */
+ u8 rbuf[IPC_RWBUF_SIZE] = {0};
+ u32 rbuflen = DIV_ROUND_UP(count, 4);
memset(cbuf, 0, sizeof(cbuf));
- mutex_lock(&ipclock);
-
- if (scu->dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
+ scu_cmd_init(cmd, op, id);
for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc];
@@ -234,30 +169,30 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
}
if (id == IPC_CMD_PCNTRL_R) {
- for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
- ipc_data_writel(scu, wbuf[nc], offset);
- ipc_command(scu, (count * 2) << 16 | id << 12 | 0 << 8 | op);
+ err = ipc_dev_raw_cmd(scu->ipc_dev, cmd, SCU_PARAM_LEN,
+ (u8 *)wbuf, count * 2, (u32 *)rbuf,
+ IPC_RWBUF_SIZE_DWORD, 0, 0);
} else if (id == IPC_CMD_PCNTRL_W) {
for (nc = 0; nc < count; nc++, offset += 1)
cbuf[offset] = data[nc];
- for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
- ipc_data_writel(scu, wbuf[nc], offset);
- ipc_command(scu, (count * 3) << 16 | id << 12 | 0 << 8 | op);
+ err = ipc_dev_raw_cmd(scu->ipc_dev, cmd, SCU_PARAM_LEN,
+ (u8 *)wbuf, count * 3, NULL, 0, 0, 0);
+
} else if (id == IPC_CMD_PCNTRL_M) {
cbuf[offset] = data[0];
cbuf[offset + 1] = data[1];
- ipc_data_writel(scu, wbuf[0], 0); /* Write wbuff */
- ipc_command(scu, 4 << 16 | id << 12 | 0 << 8 | op);
+ err = ipc_dev_raw_cmd(scu->ipc_dev, cmd, SCU_PARAM_LEN,
+ (u8 *)wbuf, 4, NULL, 0, 0, 0);
}
- err = intel_scu_ipc_check_status(scu);
if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
/* Workaround: values are read as 0 without memcpy_fromio */
memcpy_fromio(cbuf, scu->ipc_base + 0x90, 16);
- for (nc = 0; nc < count; nc++)
- data[nc] = ipc_data_readb(scu, nc);
+ regmap_bulk_read(scu->ipc_regs, IPC_DEV_SCU_RBUF_OFFSET,
+ rbuf, rbuflen);
+ memcpy(data, rbuf, count);
}
- mutex_unlock(&ipclock);
+
return err;
}
@@ -422,138 +357,6 @@ int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
}
EXPORT_SYMBOL(intel_scu_ipc_update_register);
-/**
- * intel_scu_ipc_simple_command - send a simple command
- * @cmd: command
- * @sub: sub type
- *
- * Issue a simple command to the SCU. Do not use this interface if
- * you must then access data as any data values may be overwritten
- * by another SCU access by the time this function returns.
- *
- * This function may sleep. Locking for SCU accesses is handled for
- * the caller.
- */
-int intel_scu_ipc_simple_command(int cmd, int sub)
-{
- struct intel_scu_ipc_dev *scu = &ipcdev;
- int err;
-
- mutex_lock(&ipclock);
- if (scu->dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
- ipc_command(scu, sub << 12 | cmd);
- err = intel_scu_ipc_check_status(scu);
- mutex_unlock(&ipclock);
- return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_simple_command);
-
-/**
- * intel_scu_ipc_command - command with data
- * @cmd: command
- * @sub: sub type
- * @in: input data
- * @inlen: input length in dwords
- * @out: output data
- * @outlein: output length in dwords
- *
- * Issue a command to the SCU which involves data transfers. Do the
- * data copies under the lock but leave it for the caller to interpret
- */
-int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen)
-{
- struct intel_scu_ipc_dev *scu = &ipcdev;
- int i, err;
-
- mutex_lock(&ipclock);
- if (scu->dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
-
- for (i = 0; i < inlen; i++)
- ipc_data_writel(scu, *in++, 4 * i);
-
- ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
- err = intel_scu_ipc_check_status(scu);
-
- if (!err) {
- for (i = 0; i < outlen; i++)
- *out++ = ipc_data_readl(scu, 4 * i);
- }
-
- mutex_unlock(&ipclock);
- return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_command);
-
-#define IPC_SPTR 0x08
-#define IPC_DPTR 0x0C
-
-/**
- * intel_scu_ipc_raw_command() - IPC command with data and pointers
- * @cmd: IPC command code.
- * @sub: IPC command sub type.
- * @in: input data of this IPC command.
- * @inlen: input data length in dwords.
- * @out: output data of this IPC command.
- * @outlen: output data length in dwords.
- * @sptr: data writing to SPTR register.
- * @dptr: data writing to DPTR register.
- *
- * Send an IPC command to SCU with input/output data and source/dest pointers.
- *
- * Return: an IPC error code or 0 on success.
- */
-int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen,
- u32 *out, int outlen, u32 dptr, u32 sptr)
-{
- struct intel_scu_ipc_dev *scu = &ipcdev;
- int inbuflen = DIV_ROUND_UP(inlen, 4);
- u32 inbuf[4];
- int i, err;
-
- /* Up to 16 bytes */
- if (inbuflen > 4)
- return -EINVAL;
-
- mutex_lock(&ipclock);
- if (scu->dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
-
- writel(dptr, scu->ipc_base + IPC_DPTR);
- writel(sptr, scu->ipc_base + IPC_SPTR);
-
- /*
- * SRAM controller doesn't support 8-bit writes, it only
- * supports 32-bit writes, so we have to copy input data into
- * the temporary buffer, and SCU FW will use the inlen to
- * determine the actual input data length in the temporary
- * buffer.
- */
- memcpy(inbuf, in, inlen);
-
- for (i = 0; i < inbuflen; i++)
- ipc_data_writel(scu, inbuf[i], 4 * i);
-
- ipc_command(scu, (inlen << 16) | (sub << 12) | cmd);
- err = intel_scu_ipc_check_status(scu);
- if (!err) {
- for (i = 0; i < outlen; i++)
- *out++ = ipc_data_readl(scu, 4 * i);
- }
-
- mutex_unlock(&ipclock);
- return err;
-}
-EXPORT_SYMBOL_GPL(intel_scu_ipc_raw_command);
-
/* I2C commands */
#define IPC_I2C_WRITE 1 /* I2C Write command */
#define IPC_I2C_READ 2 /* I2C Read command */
@@ -575,48 +378,143 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
struct intel_scu_ipc_dev *scu = &ipcdev;
u32 cmd = 0;
- mutex_lock(&ipclock);
- if (scu->dev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
cmd = (addr >> 24) & 0xFF;
if (cmd == IPC_I2C_READ) {
- writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
+ regmap_write(scu->i2c_regs, IPC_I2C_CNTRL_ADDR, addr);
/* Write not getting updated without delay */
mdelay(1);
- *data = readl(scu->i2c_base + I2C_DATA_ADDR);
+ regmap_read(scu->i2c_regs, I2C_DATA_ADDR, data);
} else if (cmd == IPC_I2C_WRITE) {
- writel(*data, scu->i2c_base + I2C_DATA_ADDR);
+ regmap_write(scu->i2c_regs, I2C_DATA_ADDR, *data);
mdelay(1);
- writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
+ regmap_write(scu->i2c_regs, IPC_I2C_CNTRL_ADDR, addr);
} else {
dev_err(scu->dev,
"intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
- mutex_unlock(&ipclock);
return -EIO;
}
- mutex_unlock(&ipclock);
return 0;
}
EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
-/*
- * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
- * When ioc bit is set to 1, caller api must wait for interrupt handler called
- * which in turn unlocks the caller api. Currently this is not used
- *
- * This is edge triggered so we need take no action to clear anything
- */
-static irqreturn_t ioc(int irq, void *dev_id)
+static int pre_simple_cmd_fn(u32 *cmd_list, u32 cmdlen)
{
- struct intel_scu_ipc_dev *scu = dev_id;
+ if (!cmd_list || cmdlen != SCU_PARAM_LEN)
+ return -EINVAL;
- if (scu->irq_mode)
- complete(&scu->cmd_complete);
+ cmd_list[0] |= (cmd_list[1] << IPC_CMD_SUBCMD);
- return IRQ_HANDLED;
+ return 0;
+}
+
+static int pre_cmd_fn(u32 *cmd_list, u32 cmdlen, u32 *in, u32 inlen,
+ u32 *out, u32 outlen)
+{
+ int ret;
+
+ if (inlen > IPC_WWBUF_SIZE_DWORD || outlen > IPC_RWBUF_SIZE_DWORD)
+ return -EINVAL;
+
+ ret = pre_simple_cmd_fn(cmd_list, cmdlen);
+ if (ret < 0)
+ return ret;
+
+ cmd_list[0] |= (inlen << IPC_CMD_SIZE);
+
+ return 0;
+}
+
+static int pre_raw_cmd_fn(u32 *cmd_list, u32 cmdlen, u8 *in, u32 inlen,
+ u32 *out, u32 outlen, u32 dptr, u32 sptr)
+{
+ int ret;
+
+ if (inlen > IPC_WWBUF_SIZE || outlen > IPC_RWBUF_SIZE_DWORD)
+ return -EINVAL;
+
+ ret = pre_simple_cmd_fn(cmd_list, cmdlen);
+ if (ret < 0)
+ return ret;
+
+ cmd_list[0] |= (inlen << IPC_CMD_SIZE);
+
+ return 0;
+}
+
+static int scu_ipc_err_code(int status)
+{
+ if (status & IPC_DEV_SCU_CMD_STATUS_ERR)
+ return (status & IPC_DEV_SCU_CMD_STATUS_ERR_MASK);
+ else
+ return 0;
+}
+
+static int scu_ipc_busy_check(int status)
+{
+ return status | IPC_DEV_SCU_CMD_STATUS_BUSY;
+}
+
+static u32 scu_ipc_enable_msi(u32 cmd)
+{
+ return cmd | IPC_DEV_SCU_CMD_MSI;
+}
+
+static struct intel_ipc_dev *intel_scu_ipc_dev_create(
+ struct device *dev,
+ void __iomem *base,
+ int irq)
+{
+ struct intel_ipc_dev_ops *ops;
+ struct intel_ipc_dev_cfg *cfg;
+ struct regmap *ipc_regs;
+ struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
+
+ cfg = devm_kzalloc(dev, sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return ERR_PTR(-ENOMEM);
+
+ ops = devm_kzalloc(dev, sizeof(*ops), GFP_KERNEL);
+ if (!ops)
+ return ERR_PTR(-ENOMEM);
+
+ ipc_regs = devm_regmap_init_mmio_clk(dev, NULL, base,
+ &ipc_regmap_config);
+ if (IS_ERR(ipc_regs)) {
+ dev_err(dev, "ipc_regs regmap init failed\n");
+ return ERR_CAST(ipc_regs);;
+ }
+
+ scu->ipc_regs = ipc_regs;
+
+ /* set IPC dev ops */
+ ops->to_err_code = scu_ipc_err_code;
+ ops->busy_check = scu_ipc_busy_check;
+ ops->enable_msi = scu_ipc_enable_msi;
+ ops->pre_cmd_fn = pre_cmd_fn;
+ ops->pre_raw_cmd_fn = pre_raw_cmd_fn;
+ ops->pre_simple_cmd_fn = pre_simple_cmd_fn;
+
+ /* set cfg options */
+ if (scu->irq_mode)
+ cfg->mode = IPC_DEV_MODE_IRQ;
+ else
+ cfg->mode = IPC_DEV_MODE_POLLING;
+
+ cfg->chan_type = IPC_CHANNEL_IA_SCU;
+ cfg->irq = irq;
+ cfg->use_msi = true;
+ cfg->support_sptr = true;
+ cfg->support_dptr = true;
+ cfg->cmd_regs = ipc_regs;
+ cfg->data_regs = ipc_regs;
+ cfg->wrbuf_reg = IPC_DEV_SCU_WRBUF_OFFSET;
+ cfg->rbuf_reg = IPC_DEV_SCU_RBUF_OFFSET;
+ cfg->sptr_reg = IPC_DEV_SCU_SPTR_OFFSET;
+ cfg->dptr_reg = IPC_DEV_SCU_DPTR_OFFSET;
+ cfg->status_reg = IPC_DEV_SCU_STATUS_OFFSET;
+
+ return devm_intel_ipc_dev_create(dev, INTEL_SCU_IPC_DEV, cfg, ops);
}
/**
@@ -650,25 +548,34 @@ static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (err)
return err;
- init_completion(&scu->cmd_complete);
-
scu->ipc_base = pcim_iomap_table(pdev)[0];
- scu->i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
+ scu->i2c_base = devm_ioremap_nocache(&pdev->dev, pdata->i2c_base,
+ pdata->i2c_len);
if (!scu->i2c_base)
return -ENOMEM;
- err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
- scu);
- if (err)
- return err;
+ pci_set_drvdata(pdev, scu);
+
+ scu->i2c_regs = devm_regmap_init_mmio_clk(&pdev->dev, NULL,
+ scu->i2c_base, &i2c_regmap_config);
+ if (IS_ERR(scu->i2c_regs)) {
+ dev_err(&pdev->dev, "i2c_regs regmap init failed\n");
+ return PTR_ERR(scu->i2c_regs);;
+ }
+
+ scu->ipc_dev = intel_scu_ipc_dev_create(&pdev->dev, scu->ipc_base,
+ pdev->irq);
+ if (IS_ERR(scu->ipc_dev)) {
+ dev_err(&pdev->dev, "Failed to create SCU IPC device\n");
+ return PTR_ERR(scu->ipc_dev);
+ }
/* Assign device at last */
scu->dev = &pdev->dev;
intel_scu_devices_create();
- pci_set_drvdata(pdev, scu);
return 0;
}
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 7334c44..a2d87e8 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -36,6 +36,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sfi.h>
+#include <linux/platform_data/x86/intel_ipc_dev.h>
#include <asm/intel_scu_ipc.h>
#include <asm/intel-mid.h>
@@ -46,6 +47,7 @@ struct mrst_rtc {
struct device *dev;
int irq;
struct resource *iomem;
+ struct intel_ipc_dev *ipc_dev;
u8 enabled_wake;
u8 suspend_ctrl;
@@ -110,10 +112,11 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time)
static int mrst_set_time(struct device *dev, struct rtc_time *time)
{
- int ret;
unsigned long flags;
unsigned char mon, day, hrs, min, sec;
unsigned int yrs;
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ u32 cmds[SCU_PARAM_LEN] = {IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME};
yrs = time->tm_year;
mon = time->tm_mon + 1; /* tm_mon starts at zero */
@@ -137,8 +140,7 @@ static int mrst_set_time(struct device *dev, struct rtc_time *time)
spin_unlock_irqrestore(&rtc_lock, flags);
- ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME);
- return ret;
+ return ipc_dev_simple_cmd(mrst->ipc_dev, cmds, SCU_PARAM_LEN);
}
static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
@@ -210,6 +212,7 @@ static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
struct mrst_rtc *mrst = dev_get_drvdata(dev);
unsigned char hrs, min, sec;
int ret = 0;
+ u32 cmds[SCU_PARAM_LEN] = {IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM};
if (!mrst->irq)
return -EIO;
@@ -229,7 +232,7 @@ static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
spin_unlock_irq(&rtc_lock);
- ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM);
+ ret = ipc_dev_simple_cmd(mrst->ipc_dev, cmds, SCU_PARAM_LEN);
if (ret)
return ret;
@@ -329,6 +332,10 @@ static int vrtc_mrst_do_probe(struct device *dev, struct resource *iomem,
if (!iomem)
return -ENODEV;
+ mrst_rtc.ipc_dev = intel_ipc_dev_get(INTEL_SCU_IPC_DEV);
+ if (IS_ERR_OR_NULL(mrst_rtc.ipc_dev))
+ return PTR_ERR(mrst_rtc.ipc_dev);
+
iomem = request_mem_region(iomem->start, resource_size(iomem),
driver_name);
if (!iomem) {
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
index 72c108a..a73559b 100644
--- a/drivers/watchdog/intel-mid_wdt.c
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/platform_data/intel-mid_wdt.h>
+#include <linux/platform_data/x86/intel_ipc_dev.h>
#include <asm/intel_scu_ipc.h>
#include <asm/intel-mid.h>
@@ -29,6 +30,8 @@
#define MID_WDT_TIMEOUT_MAX 170
#define MID_WDT_DEFAULT_TIMEOUT 90
+static struct intel_ipc_dev *scu_ipc_dev;
+
/* SCU watchdog messages */
enum {
SCU_WATCHDOG_START = 0,
@@ -38,7 +41,10 @@ enum {
static inline int wdt_command(int sub, u32 *in, int inlen)
{
- return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0);
+ u32 cmds[SCU_PARAM_LEN] = {IPC_WATCHDOG, sub};
+
+ return ipc_dev_cmd(scu_ipc_dev, cmds, SCU_PARAM_LEN, in,
+ inlen, NULL, 0);
}
static int wdt_start(struct watchdog_device *wd)
@@ -129,6 +135,10 @@ static int mid_wdt_probe(struct platform_device *pdev)
if (!wdt_dev)
return -ENOMEM;
+ scu_ipc_dev = intel_ipc_dev_get(INTEL_SCU_IPC_DEV);
+ if (IS_ERR_OR_NULL(scu_ipc_dev))
+ return PTR_ERR(scu_ipc_dev);
+
wdt_dev->info = &mid_wdt_info;
wdt_dev->ops = &mid_wdt_ops;
wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN;
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 0caab62..9457c7a 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -49,6 +49,7 @@
#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
#include <asm/intel-mid.h>
+#include <linux/platform_data/x86/intel_ipc_dev.h>
#include "intel_scu_watchdog.h"
@@ -94,6 +95,8 @@ MODULE_PARM_DESC(force_boot,
static struct intel_scu_watchdog_dev watchdog_device;
+static struct intel_ipc_dev *scu_ipc_dev;
+
/* Forces restart, if force_reboot is set */
static void watchdog_fire(void)
{
@@ -128,18 +131,14 @@ static int watchdog_set_ipc(int soft_threshold, int threshold)
u32 *ipc_wbuf;
u8 cbuf[16] = { '\0' };
int ipc_ret = 0;
+ u32 cmds[SCU_PARAM_LEN] = {IPC_SET_WATCHDOG_TIMER, 0};
ipc_wbuf = (u32 *)&cbuf;
ipc_wbuf[0] = soft_threshold;
ipc_wbuf[1] = threshold;
- ipc_ret = intel_scu_ipc_command(
- IPC_SET_WATCHDOG_TIMER,
- 0,
- ipc_wbuf,
- 2,
- NULL,
- 0);
+ ipc_ret = ipc_dev_cmd(scu_ipc_dev, cmds, SCU_PARAM_LEN, ipc_wbuf,
+ 2, NULL, 0);
if (ipc_ret != 0)
pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
@@ -460,6 +459,10 @@ static int __init intel_scu_watchdog_init(void)
if (check_timer_margin(timer_margin))
return -EINVAL;
+ scu_ipc_dev = intel_ipc_dev_get(INTEL_SCU_IPC_DEV);
+ if (IS_ERR_OR_NULL(scu_ipc_dev))
+ return PTR_ERR(scu_ipc_dev);
+
watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
if (watchdog_device.timer_tbl_ptr == NULL) {
--
2.7.4
