Add a driver for the Pericom PI3USB30532 Type-C cross switch /
mux chip found on some devices with a Type-C port.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/mux/Kconfig | 10 +++++
drivers/mux/Makefile | 2 +
drivers/mux/pi3usb30532.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+)
create mode 100644 drivers/mux/pi3usb30532.c
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 17938918bf93..19a3065c34e6 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -58,4 +58,14 @@ config MUX_MMIO
To compile the driver as a module, choose M here: the module will
be called mux-mmio.
+config MUX_PI3USB30532
+ tristate "Pericom PI3USB30532 Type-C cross switch driver"
+ depends on I2C
+ help
+ This driver adds support for the Pericom PI3USB30532 Type-C cross
+ switch / mux chip found on some devices with a Type-C port.
+
+ To compile the driver as a module, choose M here: the module will
+ be called mux-pi3usb30532.
+
endmenu
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
index a12e812c7966..7563dbf04593 100644
--- a/drivers/mux/Makefile
+++ b/drivers/mux/Makefile
@@ -7,9 +7,11 @@ mux-adg792a-objs := adg792a.o
mux-gpio-objs := gpio.o
mux-mmio-objs := mmio.o
mux-intel_cht_usb_mux-objs := intel_cht_usb_mux.o
+mux-pi3usb30532-objs := pi3usb30532.o
obj-$(CONFIG_MULTIPLEXER) += mux-core.o
obj-$(CONFIG_MUX_ADG792A) += mux-adg792a.o
obj-$(CONFIG_MUX_GPIO) += mux-gpio.o
obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
obj-$(CONFIG_MUX_CHT_USB_MUX) += mux-intel_cht_usb_mux.o
+obj-$(CONFIG_MUX_PI3USB30532) += mux-pi3usb30532.o
diff --git a/drivers/mux/pi3usb30532.c b/drivers/mux/pi3usb30532.c
new file mode 100644
index 000000000000..fa8abd851520
--- /dev/null
+++ b/drivers/mux/pi3usb30532.c
@@ -0,0 +1,97 @@
+/*
+ * Pericom PI3USB30532 Type-C cross switch / mux driver
+ *
+ * Copyright (c) 2017 Hans de Goede <hdegoede@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or (at your option)
+ * any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h> /* For the MUX_USB_* defines */
+#include <linux/mux/driver.h>
+
+#define PI3USB30532_CONF 0x00
+
+#define PI3USB30532_CONF_OPEN 0x00
+#define PI3USB30532_CONF_SWAP 0x01
+#define PI3USB30532_CONF_4LANE_DP 0x02
+#define PI3USB30532_CONF_USB3 0x04
+#define PI3USB30532_CONF_USB3_AND_2LANE_DP 0x06
+
+struct pi3usb30532_mux {
+ struct i2c_client *client;
+};
+
+static int pi3usb30532_mux_set_mux(struct mux_control *mux_ctrl, int state)
+{
+ struct pi3usb30532_mux *mux = mux_chip_priv(mux_ctrl->chip);
+ u8 conf = PI3USB30532_CONF_OPEN;
+
+ switch (state & ~MUX_USB_POLARITY_INV) {
+ case MUX_USB_NONE:
+ conf = PI3USB30532_CONF_OPEN;
+ break;
+ case MUX_USB_DEVICE:
+ case MUX_USB_HOST:
+ conf = PI3USB30532_CONF_USB3;
+ break;
+ case MUX_USB_HOST_AND_DP_SRC:
+ conf = PI3USB30532_CONF_USB3_AND_2LANE_DP;
+ break;
+ case MUX_USB_DP_SRC:
+ conf = PI3USB30532_CONF_4LANE_DP;
+ break;
+ }
+
+ if (state & MUX_USB_POLARITY_INV)
+ conf |= PI3USB30532_CONF_SWAP;
+
+ return i2c_smbus_write_byte_data(mux->client, PI3USB30532_CONF, conf);
+}
+
+static const struct mux_control_ops pi3usb30532_mux_ops = {
+ .set = pi3usb30532_mux_set_mux,
+};
+
+static int pi3usb30532_mux_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct pi3usb30532_mux *mux;
+ struct mux_chip *mux_chip;
+
+ mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*mux));
+ if (IS_ERR(mux_chip))
+ return PTR_ERR(mux_chip);
+
+ mux_chip->ops = &pi3usb30532_mux_ops;
+ mux_chip->mux[0].states = MUX_USB_STATES;
+ mux = mux_chip_priv(mux_chip);
+ mux->client = client;
+
+ return devm_mux_chip_register(dev, mux_chip);
+}
+
+static const struct i2c_device_id pi3usb30532_mux_table[] = {
+ { "pi3usb30532" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pi3usb30532_mux_table);
+
+static struct i2c_driver pi3usb30532_mux_driver = {
+ .driver = {
+ .name = "pi3usb30532",
+ },
+ .probe_new = pi3usb30532_mux_probe,
+ .id_table = pi3usb30532_mux_table,
+};
+
+module_i2c_driver(pi3usb30532_mux_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver");
+MODULE_LICENSE("GPL");
--
2.13.5
