Hi,
On 14-08-17 22:14, Hans de Goede wrote:
At least one BIOS enumerates the max17047 both through the INT33FE ACPI
device (it is right there in the resources table) as well as through a
separate MAX17047 device.
This commit checks for the max17047 already being enumerated through
a separate MAX17047 ACPI device and if so it uses the i2c-client
instantiated for this and attaches the device-props for the max17047 to
that i2c-client.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
What is the status of this patch ? It would be nice to get this fix
into 4.14.
Regards,
Hans
---
drivers/platform/x86/intel_cht_int33fe.c | 64 +++++++++++++++++++++++++++-----
1 file changed, 54 insertions(+), 10 deletions(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index da706e2c4232..5f1924fb3190 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -34,6 +34,35 @@ struct cht_int33fe_data {
struct i2c_client *pi3usb30532;
};
+/*
+ * Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates
+ * the max17047 both through the INT33FE ACPI device (it is right there
+ * in the resources table) as well as through a separate MAX17047 device.
+ *
+ * These helpers are used to work around this by checking if an i2c-client
+ * for the max17047 has already been registered.
+ */
+int cht_int33fe_check_for_max17047(struct device *dev, void *data)
+{
+ const char *name = dev_name(dev);
+ struct i2c_client **max17047 = data;
+
+ if (name && strcmp(name, "i2c-MAX17047:00") == 0) {
+ *max17047 = to_i2c_client(dev);
+ return 1;
+ }
+
+ return 0;
+}
+
+struct i2c_client *cht_int33fe_find_max17047(void)
+{
+ struct i2c_client *max17047 = NULL;
+
+ i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
+ return max17047;
+}
+
static const char * const max17047_suppliers[] = { "bq24190-charger" };
static const struct property_entry max17047_props[] = {
@@ -46,9 +75,10 @@ static int cht_int33fe_probe(struct i2c_client *client)
struct device *dev = &client->dev;
struct i2c_board_info board_info;
struct cht_int33fe_data *data;
+ struct i2c_client *max17047;
unsigned long long ptyp;
acpi_status status;
- int fusb302_irq;
+ int ret, fusb302_irq;
status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp);
if (ACPI_FAILURE(status)) {
@@ -75,13 +105,25 @@ static int cht_int33fe_probe(struct i2c_client *client)
if (!data)
return -ENOMEM;
- memset(&board_info, 0, sizeof(board_info));
- strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
- board_info.properties = max17047_props;
-
- data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
- if (!data->max17047)
- return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
+ /* Work around BIOS bug, see comment on cht_int33fe_find_max17047 */
+ max17047 = cht_int33fe_find_max17047();
+ if (max17047) {
+ /* Pre-existing i2c-client for the max17047, add device-props */
+ ret = device_add_properties(&max17047->dev, max17047_props);
+ if (ret)
+ return ret;
+ /* And re-probe to get the new device-props applied. */
+ ret = device_reprobe(&max17047->dev);
+ if (ret)
+ dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
+ } else {
+ memset(&board_info, 0, sizeof(board_info));
+ strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
+ board_info.properties = max17047_props;
+ data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
+ if (!data->max17047)
+ return -EPROBE_DEFER; /* Wait for i2c-adapter to load */
+ }
memset(&board_info, 0, sizeof(board_info));
strlcpy(board_info.type, "fusb302", I2C_NAME_SIZE);
@@ -106,7 +148,8 @@ static int cht_int33fe_probe(struct i2c_client *client)
i2c_unregister_device(data->fusb302);
out_unregister_max17047:
- i2c_unregister_device(data->max17047);
+ if (data->max17047)
+ i2c_unregister_device(data->max17047);
return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
}
@@ -117,7 +160,8 @@ static int cht_int33fe_remove(struct i2c_client *i2c)
i2c_unregister_device(data->pi3usb30532);
i2c_unregister_device(data->fusb302);
- i2c_unregister_device(data->max17047);
+ if (data->max17047)
+ i2c_unregister_device(data->max17047);
return 0;
}
