This provides a new input driver for supporting the power button on Dollar Cove TI PMIC, found on Cherrytrail-based devices. The patch is based on the original work by Intel, found at: https://github.com/01org/ProductionKernelQuilts Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> --- v1->v2: * Move power-button driver to platform/x86, driver renames accordingly * Add missing wake-irq cleanup to power-button driver drivers/platform/x86/Kconfig | 8 +++ drivers/platform/x86/Makefile | 1 + drivers/platform/x86/intel_dc_ti_pwrbtn.c | 96 +++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/platform/x86/intel_dc_ti_pwrbtn.c diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 80b87954f6dd..25ab9f6ba533 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1139,6 +1139,14 @@ config SILEAD_DMI with the OS-image for the device. This option supplies the missing information. Enable this for x86 tablets with Silead touchscreens. +config INTEL_DC_TI_PWRBTN + tristate "Dollar Cove TI power button driver" + depends on INTEL_SOC_PMIC_DC_TI + depends on INPUT + help + Say Y here fi you want to have a power button driver for + Dollar Cove TI PMIC. + endif # X86_PLATFORM_DEVICES config PMC_ATOM diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 91cec1751461..1ce5c18d249e 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -83,3 +83,4 @@ obj-$(CONFIG_PMC_ATOM) += pmc_atom.o obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o obj-$(CONFIG_MLX_CPLD_PLATFORM) += mlxcpld-hotplug.o obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o +obj-$(CONFIG_INTEL_DC_TI_PWRBTN) += intel_dc_ti_pwrbtn.o diff --git a/drivers/platform/x86/intel_dc_ti_pwrbtn.c b/drivers/platform/x86/intel_dc_ti_pwrbtn.c new file mode 100644 index 000000000000..1a40f55699fb --- /dev/null +++ b/drivers/platform/x86/intel_dc_ti_pwrbtn.c @@ -0,0 +1,96 @@ +/* + * Power-button driver for Dollar Cove TI PMIC + * Copyright (C) 2014 Intel Corp + * Copyright (c) 2017 Takashi Iwai <tiwai@xxxxxxx> + */ + +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> +#include <linux/slab.h> + +#define DC_TI_SIRQ_REG 0x3 +#define SIRQ_PWRBTN_REL (1 << 0) + +static irqreturn_t dc_ti_pwrbtn_interrupt(int irq, void *dev_id) +{ + struct input_dev *input = dev_id; + struct device *dev = input->dev.parent; + struct regmap *regmap = dev_get_drvdata(dev); + int state; + + if (!regmap_read(regmap, DC_TI_SIRQ_REG, &state)) { + dev_dbg(dev, "SIRQ_REG=0x%x\n", state); + state &= SIRQ_PWRBTN_REL; + input_event(input, EV_KEY, KEY_POWER, !state); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int dc_ti_pwrbtn_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent); + struct input_dev *input; + int irq; + int ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -EINVAL; + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + input->name = pdev->name; + input->phys = "power-button/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input_set_capability(input, EV_KEY, KEY_POWER); + ret = input_register_device(input); + if (ret) + return ret; + + dev_set_drvdata(dev, pmic->regmap); + + ret = devm_request_threaded_irq(dev, irq, NULL, dc_ti_pwrbtn_interrupt, + 0, KBUILD_MODNAME, input); + if (ret) + return ret; + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + return 0; +} + +static int dc_ti_pwrbtn_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + return 0; +} + +static struct platform_device_id dc_ti_pwrbtn_id_table[] = { + { .name = "dc_ti_pwrbtn" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, dc_ti_pwrbtn_id_table); + +static struct platform_driver dc_ti_pwrbtn_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = dc_ti_pwrbtn_probe, + .remove = dc_ti_pwrbtn_remove, + .id_table = dc_ti_pwrbtn_id_table, +}; +module_platform_driver(dc_ti_pwrbtn_driver); + +MODULE_DESCRIPTION("Power-button driver for Dollar Cove TI PMIC"); +MODULE_LICENSE("GPL v2"); -- 2.14.0
