On Mon, Jun 19, 2017 at 3:57 PM, Pali Rohár <pali.rohar@xxxxxxxxx> wrote:
> On Monday 19 June 2017 15:36:29 Kai-Heng Feng wrote:
>> Dell Latitude 3160 does not have keyboard backlight, but there is a
>> sysfs interface for it, which does nothing at all.
>>
>> KBD_LED_ON_TOKEN is the only token can be found. Since it doesn't have
>
> *ON* really?
>
>> KBD_LED_OFF_TOKEN or KBD_LED_AUTO_*_TOKEN, it should be safe to assume it
>> does not support keyboard backlight.
>>
>> Models which do not use SMBIOS to control keyboard backlight, also have
>> this issue. Brightness level is 0 on these models. Verified on Dell
>> Inspiron 3565.
>>
>> Reports keyboard backlight is supported only when tokens other than
>> KBD_LED_ON_TOKEN can be found, or brightness level is not 0.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>> ---
>>
>> v2:
>> The only token can be found is actually KBD_LED_ON_TOKEN, which is BIT(5),
>> instead of KBD_LED_OFF_TOKEN. Change commit log accordingly.
>>
>> Use token bit to make the intention more clear.
>> Also consider kbd_mode_levels_count and kbd_info.levels, suggested by
>> Pali Rohár.
>>
>> Use XOR to simplify the bitmask comparison, suggested by
>> Andy Shevchenko.
>>
>> drivers/platform/x86/dell-laptop.c | 16 +++++++++++++++-
>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
>> index ec202094bd50..4b21fc982cb0 100644
>> --- a/drivers/platform/x86/dell-laptop.c
>> +++ b/drivers/platform/x86/dell-laptop.c
>> @@ -1148,6 +1148,15 @@ static const int kbd_tokens[] = {
>> KBD_LED_ON_TOKEN,
>> };
>>
>> +enum kbd_led_token_bit {
>> + KBD_LED_TOKEN_BIT_OFF = 0,
>> + KBD_LED_TOKEN_BIT_AUTO_25,
>> + KBD_LED_TOKEN_BIT_AUTO_50,
>> + KBD_LED_TOKEN_BIT_AUTO_75,
>> + KBD_LED_TOKEN_BIT_AUTO_100,
>> + KBD_LED_TOKEN_BIT_ON,
>> +};
>> +
>> static u16 kbd_token_bits;
>>
>> static struct kbd_info kbd_info;
>> @@ -1510,7 +1519,12 @@ static void kbd_init(void)
>> ret = kbd_init_info();
>> kbd_init_tokens();
>>
>> - if (kbd_token_bits != 0 || ret == 0)
>> + /*
>> + * If brightness level is 0, or KBD_LED_ON_TOKEN is the only token,
>> + * consider there is no keyboard backlight.
>> + */
>> + if ((ret == 0 && (kbd_info.levels || kbd_mode_levels_count)) ||
>> + kbd_token_bits ^ BIT(KBD_LED_TOKEN_BIT_ON))
>
> So in case there would be only *OFF* token then interface is exported
> too... This does not seems to be good idea.
>
> If there is machine for which firmware provides only *ON* token, then I
> think we should presence for at least two tokens.
So I can use kbd_get_valid_token_counts() >= 2 here.
>
> And similarly kbd_mode_levels_count needs to be checked that is at least
> two (as "off" is in count).
So it should be kbd_mode_levels_count >= 2.
The same rule should also apply to kbd_info.levels, right?
>
>> kbd_led_present = true;
>> }
>>
>
> --
> Pali Rohár
> pali.rohar@xxxxxxxxx
