Re: [PATCH 00/10] fujitsu-laptop: use device-specific data instead of module-wide globals

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Michael

On Tue, May 02, 2017 at 03:21:44PM +0200, Micha?? K??pie?? wrote:
> In order to avoid accessing global structures from call_fext_func(), we
> need to pass it an ACPI handle to FUJ02E3.  This decreases code
> readability in two ways: by increasing the function's parameter count
> from an already challenging four to an even worse five and by causing
> line breaks to be inserted (due to the 80-column line rule) in places
> they were previously not necessary in.
> 
> To counter this growing obfuscation, patches 01/10, 02/10 and 05/10 (all
> called out in your review) work in tandem to ensure that all uses of
> call_fext_func() remain legible _and_ fit in one line.  All three of
> these patches are needed to prevent line breaks from being inserted
> (granted, that is an arbitrary objective), because call_fext_func()
> needs to get the ACPI handle somehow and the latter is stored in a field
> of a device-specific structure. ...

Thanks for the explanation of your rationale behind patchs 1, 2 and 5.  In
short, they are (at the lowest level) cosmetic aimed at the adherence to the
80-column guideline, but for the reasons you outlined this is not
necessarily a bad thing.

> And thus we come back to the question of "to split or not to split".
> The three options we have are:
> 
>   - one module, two drivers: current, suboptimal, state of affairs,
> 
>   - two modules, one driver in each: the original cleanup approach I
>     have been targeting in all of my patch series for fujitsu-laptop,
> 
>   - one module, one driver handling both ACPI devices: the new approach
>     you suggested in your review.
> 
> I have not considered the last option until now as I deemed it
> unacceptable in light of the kernel's philosophy in this regard.
> However, such an approach might not be bad in and of itself, because:
> 
>   - FUJ02B1 is not fully standalone as it needs FUJ02E3 on some models,

This to me is a fairly strong indication that migrating to the "one module
one driver" approach is worthwhile considering.  If we do split we will end
up with two modules interacting with FUJ02E3, at least on some hardware. 
Conceptually it makes more sense to me that all interaction with FUJ02E3 is
instigated from one module/driver as it will make it easier to ensure that
minipulations of FUJ02E3 for one task don't have unintended side effects for
others.

>   - FUJ02E3 is present in all models we know of, while FUJ02B1 seems to
>     be phased out in newer models,

Agreed.  Furthermore, if FUJ02E3 is phased out it is reasonable to expect
that any platform driver required by the resulting hardware would be so
different to fujitsu-laptop that a new driver would be needed anyway.

>   - userspace is unlikely to care which input device each hotkey event
>     comes from,

Agreed.

>   - the memory footprint of both drivers is negligible, considering that
>     both are only loaded on machines with hundreds of MB of RAM.

Agreed.

> So we could perhaps make fujitsu-laptop register _one_ ACPI driver,
> which binds to the FUJ02E3 device and only deals with backlight when the
> FUJ02B1 device is present and the vendor interface is either
> automatically selected by the kernel or explicitly requested by the
> user.  We would then have a single device-specific structure ("priv"
> would not be ambiguous any more) holding two ACPI handles ("fjex_handle"
> and "fext_handle"?) and all the other fields from both struct fujitsu_bl
> and struct fujitsu_laptop.

Yes, these are the kinds of benefits I was thinking about.

> Please note that I have not played with this idea in code yet and perhaps
> handling the added complexity will make the driver more, not less,
> convoluted.

I understand.  Since FUJ02B1 is only relevant to the backlight I can't see
how the above approach would result in a signficant increase in complexity,
but like you I haven't had a close look at the implications.

> Darren, does the above sound more like a viable plan or rather a pipe
> dream?  Answering Jonathan's question, there is no added benefit from
> splitting fujitsu-laptop into two separate modules, it is only about
> following the "one module, one driver" philosophy.  Any answer to this
> question puts the variable naming discussion on a specific track, so
> perhaps this is the first dilemma that we should sort out.

I agree.  We should resolve the question of the split/no-split option first
since the answer does influence many of the other pending questions. 

Darren: I would therefore be interested in your take on the three options
(as summarised by Michael) so we can determine a way forward.

Regards
  jonathan



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux