On Fri, Mar 17, 2017 at 07:06:22PM -0700, Kuppuswamy Sathyanarayanan wrote:
> To maintain the uniformity in accessing GCR registers, this patch
> modifies the S0ix counter read function to use GCR address base
> instead of ipc address base.
>
looks fine to me.
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
> ---
> arch/x86/include/asm/intel_pmc_ipc.h | 2 ++
> drivers/platform/x86/intel_pmc_ipc.c | 10 +++-------
> 2 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
> index 8402efe..fac89eb 100644
> --- a/arch/x86/include/asm/intel_pmc_ipc.h
> +++ b/arch/x86/include/asm/intel_pmc_ipc.h
> @@ -25,6 +25,8 @@
>
> /* GCR reg offsets from gcr base*/
> #define PMC_GCR_PMC_CFG_REG 0x08
> +#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
> +#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
>
> #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
>
> diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
> index 0c66c11..54d5254 100644
> --- a/drivers/platform/x86/intel_pmc_ipc.c
> +++ b/drivers/platform/x86/intel_pmc_ipc.c
> @@ -57,10 +57,6 @@
> #define IPC_WRITE_BUFFER 0x80
> #define IPC_READ_BUFFER 0x90
>
> -/* PMC Global Control Registers */
> -#define GCR_TELEM_DEEP_S0IX_OFFSET 0x1078
> -#define GCR_TELEM_SHLW_S0IX_OFFSET 0x1080
> -
> /* Residency with clock rate at 19.2MHz to usecs */
> #define S0IX_RESIDENCY_IN_USECS(d, s) \
> ({ \
> @@ -196,7 +192,7 @@ static inline u32 ipc_data_readl(u32 offset)
>
> static inline u64 gcr_data_readq(u32 offset)
> {
> - return readq(ipcdev.ipc_base + offset);
> + return readq(ipcdev.gcr_mem_base + offset);
> }
>
> int intel_pmc_gcr_read(u32 offset, u32 *data)
> @@ -838,8 +834,8 @@ int intel_pmc_s0ix_counter_read(u64 *data)
> if (!ipcdev.has_gcr_regs)
> return -EACCES;
>
> - deep = gcr_data_readq(GCR_TELEM_DEEP_S0IX_OFFSET);
> - shlw = gcr_data_readq(GCR_TELEM_SHLW_S0IX_OFFSET);
> + deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG);
> + shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG);
>
> *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
>
> --
> 2.7.4
>
--
Best Regards,
Rajneesh
