On x86 we do not have devicetree to link the pwm controller and
the display controller together. So someone needs to call
pwm_add_table() to create the link, so that the i915 driver's
pwm_get(dev, "pwm_backlight") call returns the lpss' pwm0.
The pwm subsystem does not want to have pwm_add_table() calls
directly in pwm drivers (this leads to probe ordering issues),
so lets do it here since the acpi-lpss code is always builtin.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/acpi/acpi_lpss.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 8ea836c..1b4bcf6 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -20,6 +20,7 @@
#include <linux/platform_data/clk-lpss.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
#include <linux/delay.h>
#include "internal.h"
@@ -154,6 +155,17 @@ static void byt_i2c_setup(struct lpss_private_data *pdata)
writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
}
+/* BSW PWM used for backlight control by the i915 driver */
+static struct pwm_lookup bsw_pwm_lookup[] = {
+ PWM_LOOKUP("80862288:00", 0, "0000:00:02.0", "pwm_backlight", 0,
+ PWM_POLARITY_NORMAL),
+};
+
+static void bsw_pwm_setup(struct lpss_private_data *pdata)
+{
+ pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
+}
+
static const struct lpss_device_desc lpt_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
.prv_offset = 0x800,
@@ -191,6 +203,7 @@ static const struct lpss_device_desc byt_pwm_dev_desc = {
static const struct lpss_device_desc bsw_pwm_dev_desc = {
.flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+ .setup = bsw_pwm_setup,
};
static const struct lpss_device_desc byt_uart_dev_desc = {
--
2.9.3
