Re: [PATCH v5 3/6] leds: triggers: Add support for read-only triggers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 18-11-16 09:52, Jacek Anaszewski wrote:
Hi Hans,

Thanks for the new patch set.

On 11/17/2016 11:24 PM, Hans de Goede wrote:
In some cases an LED is controlled through a hardwired (taken care of
in firmware outside of the kernels control) trigger.

Add an LED_TRIGGER_READ_ONLY flag for this and disallow user-space
changing the trigger when this flag is set.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v5:
-This is a new patch in v5 of this patch-set
---
 drivers/leds/led-class.c    | 2 +-
 drivers/leds/led-triggers.c | 5 +++++
 include/linux/leds.h        | 1 +
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 326ee6e..56f32cc 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -54,7 +54,7 @@ static ssize_t brightness_store(struct device *dev,
     if (ret)
         goto unlock;

-    if (state == LED_OFF)
+    if (state == LED_OFF && !(led_cdev->flags & LED_TRIGGER_READ_ONLY))
         led_trigger_remove(led_cdev);
     led_set_brightness(led_cdev, state);

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index d2ed9c2..9669104 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -37,6 +37,11 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
     struct led_trigger *trig;
     int ret = count;

+    if (led_cdev->flags & LED_TRIGGER_READ_ONLY) {
+        dev_err(led_cdev->dev, "Error this led triggers is hardwired and cannot be changed\n");
+        return -EINVAL;

It means that after a trigger is once assigned to a LED class device
it will be impossible to deactivate it.

No this flag is not set by the trigger code, it is set by the LED
driver itself, to indicate there is a hardwired trigger.

Why not leaving it to the
user's decision whether they want to have hw brightness changes
notifications?

The user cannot disable the hotkey -> keyboard-backlight-led link
and the trigger represents this link.

More over, if we allow changing the trigger, then writing 0
to the brightness attribute will remove the trigger and make
the device no longer poll-able, and writing 0 is exactly what
the systemd-backlight service does when restoring backlight
settings on boot and the kbd-backlight was off at the last
shutdown.

This again shows how poorly thought out the old "brightness"
file API is, all systemd-backlight want to do is set the
brightness to 0, but as a side effect it will also unlink the
trigger, because writing 0 has 2 effects for one system call.
Anyways this is not something we can fix.


This way we disable the possibility to set different
trigger like e.g. timer, after this one is set, which is not
a non-realistic scenario.

Then we would have 2 triggers active, as the hotkey trigger
is part of the firmware of the laptop and is never going away.

Generally it is quite odd to add a functionality that once
set is latched. If one will set such a trigger by mistake, then
system restart will be required to reset this (unless the driver
is built as a module).

This is not under user-control, the is controlled by the
LED driver by setting the flag before registering the LED and
this is on purpose, because the trigger is hardwired.

TL;DR:

1) We've decided to model the hotkey -> kbd-backlight control link as a trigger
2) This is hardwired in the laptop's firmware therefor the trigger cannot
   be changed
3) Thus we need support for read-only triggers

Regards,

Hans




+    }
+
     mutex_lock(&led_cdev->led_access);

     if (led_sysfs_is_disabled(led_cdev)) {
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 870b8c2..e076b74 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -47,6 +47,7 @@ struct led_classdev {
 #define LED_DEV_CAP_FLASH    (1 << 18)
 #define LED_HW_PLUGGABLE    (1 << 19)
 #define LED_PANIC_INDICATOR    (1 << 20)
+#define LED_TRIGGER_READ_ONLY   (1 << 21)

     /* set_brightness_work / blink_timer flags, atomic, private. */
     unsigned long        work_flags;



--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux