Re: v4.8-rc1: thinkpad x60: running at low frequency even during kernel build

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> > Ok, can do, let me recompile and reboot.
> > 
> > > 
> > > When temperature limit is reached acpi_processor_ppc_notifier()
> > > should
> > > be called.
> > 
> > No, that's not correct for ACPI passive trip points, is it? If I
> > recall correctly, those should be monitored even when temperature is
> > below them so that it does not reach them...?
> No if BIOS is sending PPC, it will be called. You can try first in 4.8.
> 
> Also try
> 
> Don't run workload, just on an idle system.
> 
> # echo 1 > /sys/class/thermal/cooling_device2/cur_state
> monitor the scaling_max_freq, it should reduce
> 
> # echo 2 > /sys/class/thermal/cooling_device2/cur_state
> monitor the scaling_max_freq, it should reduce

Yes, this seems to work. scaling_max goes to 1.5, then 1.1. Also under
load, scaling_max_freq changes. But at that point, we are already
around 98C... and bios_limit stays the same all the time in v4.9.

Best regards,
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux