Re: v4.8-rc1: thinkpad x60: running at low frequency even during kernel build

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2016-11-04 at 21:44 +0100, Pavel Machek wrote:
> Hi!
> 
> > 
> > > 
> > > Let me try v4.9-rc2... that works ok (cpus at the high frequency
> > > during the kernel build). Unfortunately that sends my cpus to 99C
> > > temperature range (and eventually forces emergency shutdown).
> > 
> > This we have to debug. Do you see same line like 
> > "
> > /sys/devices/system/cpu/cpu0/cpufreq/bios_limit:1000000
> > "
> > If not we need
> > to find out why.
> 
> I'd prefer mails over bugzilla for now...
> 
> 4.9-rc2 has bios_limit:
> 
> pavel@duo:~$ cat /sys/devices/system/cpu/cpu0/cpufreq/bios_limit
> 1833000
> 
> and it has thermal zones:
> 
> /sys/devices/virtual/thermal/thermal_zone0/trip_point_0_temp 127000
> /sys/devices/virtual/thermal/thermal_zone0/trip_point_0_type critical
> /sys/devices/virtual/thermal/thermal_zone1/trip_point_0_temp 97000
> /sys/devices/virtual/thermal/thermal_zone1/trip_point_0_type critical
> /sys/devices/virtual/thermal/thermal_zone1/trip_point_1_temp 92500
> /sys/devices/virtual/thermal/thermal_zone1/trip_point_1_type passive
> 
It will not act if there is no binding information. Do you have more
files in this folder?

grep -r . * in /sys/class/thermal will be helpful.


> ..so it should slow down CPU at 92C.
> 
> So lets push the temperature up a bit...
> 
> sudo watch cat /proc/acpi/ibm/thermal
> /sys/devices/system/cpu/cpu0/cpufreq/bios_limit
> /sys/devices/virtual/thermal/thermal_zone1/temp  /sys/devices/system/
> cpu/cpu0/cpufreq/cpuinfo_cur_freq
> 
> temperatures:   98 49 -128 85 28 -128 28 -128 49 58 -128 -128 -128
> -128 -128 -128
> 1833000
> 95000
> 1833000
> 
> Hmm. bios_limit does not seem to change, even when the temperature is
> clearly above the trip point. (It is also interestng that acpi/ibm
> reports bigger temperatures than
> /sys/devices/virtual/thermal/thermal_zone1/temp . I have seen 103C
> there.)
Probably they are showing package and core temperature or have a
different sampling interval.

Try enabling thermald service in Debian. it has access to more knobs to
control thermals.

Thanks,
Srinivas
��.n��������+%������w��{.n������_���v��z����n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�

[Index of Archives]     [Linux Kernel Development]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux