[Re-sending to a wider audience suggested by Darren Hart] The UP Board is a new SBC based on the Intel Atom X5-Z8350 "Cherry Trail" SoC and features a 40-pin I/O pin header and form-factor inspired by the Raspberry Pi 2. It utilises a CPLD between the SoC and the external 40-pin header to provide buffered voltage level-shifting of the I/O signals, mux switching and LED control, and programmable pin mapping between the SoC and the external pin header. The gpio, pinctrl and led drivers provided in this patch series enable and manage the functions provided by that CPLD. I have some open questions about this patch series: * Is it ok to place all of these various UP board drivers together in drivers/platform/x86/, or would it be preferable to place them in the respective sub-system directories (gpio, pinctrl, etc.)? My rationale for keeping them together here is that they are all specific to this UP Board platform and not expected to be generally useful on any other platforms (except variants of UP). * Is it acceptable to include hard-coded references to ACPI device IDs (representing devices integrated on the SoC devices) for the purpose of pin map and gpio references? Or is it required to use only named gpio pins? Any feedback/suggestions on the questions above, and the patch series in general, would be greatly appreciated! Further information on the UP board can be obtained from [1] and [2]. [1] https://www.up-board.org [2] https://up-community.org Dan O'Donovan (5): platform: x86: add driver for UP Board I/O CPLD platform: x86: add UP Board I/O pinctrl driver platform: x86: add UP Board I/O gpio driver platform: x86: add UP Board CPLD LED driver platform: x86: add platform driver for UP Board drivers/platform/x86/Kconfig | 13 + drivers/platform/x86/Makefile | 5 + drivers/platform/x86/up_board.c | 167 ++++++++++ drivers/platform/x86/up_board_cpld.c | 560 ++++++++++++++++++++++++++++++++ drivers/platform/x86/up_board_cpld.h | 38 +++ drivers/platform/x86/up_board_gpio.c | 254 +++++++++++++++ drivers/platform/x86/up_board_gpio.h | 59 ++++ drivers/platform/x86/up_board_leds.c | 85 +++++ drivers/platform/x86/up_board_leds.h | 50 +++ drivers/platform/x86/up_board_pinctrl.c | 285 ++++++++++++++++ drivers/platform/x86/up_board_pinctrl.h | 102 ++++++ 11 files changed, 1618 insertions(+) create mode 100644 drivers/platform/x86/up_board.c create mode 100644 drivers/platform/x86/up_board_cpld.c create mode 100644 drivers/platform/x86/up_board_cpld.h create mode 100644 drivers/platform/x86/up_board_gpio.c create mode 100644 drivers/platform/x86/up_board_gpio.h create mode 100644 drivers/platform/x86/up_board_leds.c create mode 100644 drivers/platform/x86/up_board_leds.h create mode 100644 drivers/platform/x86/up_board_pinctrl.c create mode 100644 drivers/platform/x86/up_board_pinctrl.h -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
