Haswell-based Fujitsu laptops (Lifebook E734/E744/E754) have a touchpad
toggle hotkey (Fn+F4) which is handled transparently to the operating
system: while an ACPI notification is sent to FUJ02B1 when Fn+F4 is
pressed, touchpad state is properly toggled without any explicit support
for this operation in fujitsu-laptop.
Skylake-based models (Lifebook E736/E746/E756) also have that hotkey,
but the touchpad is not toggled transparently to the operating system.
When Fn+F4 is pressed, an ACPI notification is sent to FUJ02E3. A
subsequent call to S000 (FUNC_RFKILL) can be used to determine whether
the touchpad toggle hotkey was pressed so that an input event can be
sent to userspace.
Relevant ACPI code:
Method (_L21, 0, NotSerialized)
{
...
If (AHKF)
{
Notify (\_SB.FEXT, 0x80)
}
...
}
Method (S000, 3, Serialized)
{
Name (_T_0, Zero)
Local0 = Zero
While (One)
{
_T_0 = Arg0
If (_T_0 == Zero)
{
Local0 |= 0x04000000
Local0 |= 0x02000000
Local0 |= 0x00020000
Local0 |= 0x0200
Local0 |= 0x0100
Local0 |= 0x20
}
ElseIf (_T_0 == One)
{
...
If (AHKF & 0x08)
{
Local0 |= 0x04000000
AHKF ^= 0x08
}
...
} ...
Break
}
Return (Local0)
}
Pressing Fn+F4 raises GPE 0x21 and sets bit 3 in AHKF. This in turn
results in bit 26 being set in the value returned by FUNC_RFKILL called
with 1 as its first argument. On Skylake-based models, bit 26 is also
set in the value returned by FUNC_RFKILL called with 0 as its first
argument (this value is saved in fujitsu_hotkey->rfkill_supported upon
module initialization), which suggests that this bit is set on models
which do not handle touchpad toggling transparently to the operating
system.
Note that bit 3 is cleared in AHKF once FUNC_RFKILL is called with 1 as
its first argument, which requires fujitsu-laptop to handle this hotkey
in a different manner than the other, GIRB-based hotkeys: two input
events (press and release) are immediately sent once Fn+F4 is pressed.
Reported-and-tested-by: Jan-Marek Glogowski <glogow@xxxxxxxxxx>
Signed-off-by: Michał Kępień <kernel@xxxxxxxxxx>
---
Changes from v2:
- edited code comment so that it defines "some models" more precisely.
Changes from v1:
- added KEY_TOUCHPAD_TOGGLE to the FUJ02E3 input device's key bitmap,
- added code comment.
drivers/platform/x86/fujitsu-laptop.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index ce41bc3..36cd743 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -856,6 +856,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
set_bit(fujitsu->keycode3, input->keybit);
set_bit(fujitsu->keycode4, input->keybit);
set_bit(fujitsu->keycode5, input->keybit);
+ set_bit(KEY_TOUCHPAD_TOGGLE, input->keybit);
set_bit(KEY_UNKNOWN, input->keybit);
error = input_register_device(input);
@@ -1060,6 +1061,19 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event)
}
}
+ /* On some models (first seen on the Skylake-based Lifebook
+ * E736/E746/E756), the touchpad toggle hotkey (Fn+F4) is
+ * handled in software; its state is queried using FUNC_RFKILL
+ */
+ if ((fujitsu_hotkey->rfkill_supported & BIT(26)) &&
+ (call_fext_func(FUNC_RFKILL, 0x1, 0x0, 0x0) & BIT(26))) {
+ keycode = KEY_TOUCHPAD_TOGGLE;
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ input_sync(input);
+ }
+
break;
default:
keycode = KEY_UNKNOWN;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
