On Wed, 24 Jun 2015 11:52:31 +0900 Taku Izumi <izumi.taku@xxxxxxxxxxxxxx> wrote: > This patchsets adds FUJITSU Extended Socket network device driver. > Extended Socket network device is a shared memory based high-speed network > interface between Extended Partitions of PRIMEQUEST 2000 E2 series. > > You can get some information about Extended Partition and Extended > Socket by referring the following manual. > > http://globalsp.ts.fujitsu.com/dmsp/Publications/public/CA92344-0537.pdf > 3.2.1 Extended Partitioning > 3.2.2 Extended Socket > > v1 -> v2: > - Location change > drivers/platform/x86 => driver/net Could/should this driver be placed under driver/net/ethernet/fujitsu ?? You are using Ethernet addresses but they are kind of special, always 02:00:00:00:00:xx which is hard-coded... maybe I misunderstand the code/hw and it is not Ethernet? [...] > drivers/net/fjes/Makefile | 31 + > drivers/net/fjes/fjes.h | 77 +++ > drivers/net/fjes/fjes_ethtool.c | 135 ++++ > drivers/net/fjes/fjes_hw.c | 1122 +++++++++++++++++++++++++++++++ > drivers/net/fjes/fjes_hw.h | 333 ++++++++++ > drivers/net/fjes/fjes_main.c | 1397 +++++++++++++++++++++++++++++++++++++++ > drivers/net/fjes/fjes_regs.h | 142 ++++ > 9 files changed, 3246 insertions(+) > create mode 100644 drivers/net/fjes/Makefile > create mode 100644 drivers/net/fjes/fjes.h > create mode 100644 drivers/net/fjes/fjes_ethtool.c > create mode 100644 drivers/net/fjes/fjes_hw.c > create mode 100644 drivers/net/fjes/fjes_hw.h > create mode 100644 drivers/net/fjes/fjes_main.c > create mode 100644 drivers/net/fjes/fjes_regs.h > -- Best regards, Jesper Dangaard Brouer MSc.CS, Sr. Network Kernel Developer at Red Hat Author of http://www.iptv-analyzer.org LinkedIn: http://www.linkedin.com/in/brouer -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
