Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@xxxxxxxxx> --- drivers/platform/x86/Kconfig | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 172f26c..f9a8a29 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -652,6 +652,26 @@ config TOSHIBA_BT_RFKILL If you have a modern Toshiba laptop with a Bluetooth and an RFKill switch (such as the Portege R500), say Y. +config TOSHIBA_HAPS + tristate "Toshiba HDD Active Protection Sensor" + depends on ACPI + ---help--- + This driver adds support for the built-in accelerometer + found on recent Toshiba laptops equiped with HID TOS620A + device. + + This driver receives ACPI notify events 0x80 when the sensor + detects a sudden move or a harsh vibration, as well as an + ACPI notify event 0x81 whenever the movement or vibration has + been stabilized. + + Also provides sysfs entries to get/set the desired protection + level, reading the movement status of the sensor and resting the + HDD protection interface. + + If you have a recent Toshiba laptop with a built-in accelerometer + device, say Y. + config ACPI_CMPC tristate "CMPC Laptop Extras" depends on X86 && ACPI -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
