On Thursday, December 19, 2013 02:37:46 PM David E. Box wrote:
> From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
>
> Current Intel SOC cores use a MailBox Interface (MBI) to provide access to unit
> devices connected to the system fabric. This driver implements access to this
> interface on BayTrail platforms. This is a requirement for drivers that need
> access to unit registers on the platform (e.g. accessing the PUNIT for power
> management features such as RAPL). Serialized access is handled by all exported
> routines with spinlocks.
>
> The API includes 3 functions for access to unit registers:
>
> int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
> int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
> int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
>
> port: indicating the unit being accessed
> opcode: the read or write port specific opcode
> offset: the register offset within the port
> mdr: the register data to be read, written, or modified
> mask: bit locations in mdr to change
>
> Returns nonzero on error
>
> Note: GPU code handles access to the GFX unit. Therefore access to that unit
> with this driver is disallowed to avoid conflicts.
>
> Signed-off-by: David E. Box <david.e.box@xxxxxxxxxxxxxxx>
> ---
> v5: Converted from pnpacpi/mmio driver to pci/config_space driver as
> necessitated by firmware change.
>
> v4: Define driver as platform specific to BayTrail as some platforms cannot
> enumerate the MBI using ACPI as noted by Bin Gao <bin.gao@xxxxxxxxxxxxxxx>
> Renamed register macros and API funcitons to platform specific names.
> Changed dependency to PNPACPI as sugessted by Rafael Wysocki <rjw@xxxxxxxxxxxxx>
>
> v3: Converted to PNP ACPI driver as sugessted by Rafael Wysocki <rjw@xxxxxxxxxxxxx>
> Removed config visibility to user as suggested by Andi Kleen <andi@xxxxxxxxxxxxxx>
>
> v2: Made modular since there was no longer a reason not to
> Moved to x86 platform as suggested by Mathhew Garrett <mjg59@xxxxxxxxxxxxx>
> Added probe to init to cause driver load to fail if device not detected.
>
> drivers/platform/x86/Kconfig | 8 ++
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/intel_baytrail.c | 224 +++++++++++++++++++++++++++++++++
> drivers/platform/x86/intel_baytrail.h | 90 +++++++++++++
> 4 files changed, 323 insertions(+)
> create mode 100644 drivers/platform/x86/intel_baytrail.c
> create mode 100644 drivers/platform/x86/intel_baytrail.h
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index b51a746..b482e22 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -819,4 +819,12 @@ config PVPANIC
> a paravirtualized device provided by QEMU; it lets a virtual machine
> (guest) communicate panic events to the host.
>
> +config INTEL_BAYTRAIL_MBI
> + tristate
> + depends on PCI
> + ---help---
> + Needed on Baytrail platforms for access to the IOSF Sideband Mailbox
> + Interface. This is a requirement for systems that need to configure
> + the PUNIT for power management features such as RAPL.
> +
> endif # X86_PLATFORM_DEVICES
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 5dbe193..b3d4cfd 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -55,3 +55,4 @@ obj-$(CONFIG_INTEL_RST) += intel-rst.o
> obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
>
> obj-$(CONFIG_PVPANIC) += pvpanic.o
> +obj-$(CONFIG_INTEL_BAYTRAIL_MBI) += intel_baytrail.o
> diff --git a/drivers/platform/x86/intel_baytrail.c b/drivers/platform/x86/intel_baytrail.c
> new file mode 100644
> index 0000000..f96626b
> --- /dev/null
> +++ b/drivers/platform/x86/intel_baytrail.c
> @@ -0,0 +1,224 @@
> +/*
> + * Baytrail IOSF-SB MailBox Interface Driver
> + * Copyright (c) 2013, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + *
> + * The IOSF-SB is a fabric bus available on Atom based SOC's that uses a
> + * mailbox interface (MBI) to communicate with mutiple devices. This
> + * driver implements BayTrail-specific access to this interface.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/spinlock.h>
> +#include <linux/pci.h>
> +
> +#include "intel_baytrail.h"
> +
> +static DEFINE_SPINLOCK(iosf_mbi_lock);
> +
> +static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
> +{
> + return (op << 24) | (port << 16) | (offset << 8) | BT_MBI_ENABLE;
> +}
> +
> +static struct pci_dev *mbi_pdev; /* one mbi device */
> +
> +/* Hold lock before calling */
Which lock?
> +static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
> +{
> + int result;
> +
> + if (!mbi_pdev)
> + return -ENODEV;
> +
> + if (mcrx) {
> + result = pci_write_config_dword(mbi_pdev,
> + BT_MBI_MCRX_OFFSET, mcrx);
> + if (result < 0)
> + goto iosf_mbi_read_err;
Why not to call the label just err?
> + }
> +
> + result = pci_write_config_dword(mbi_pdev,
> + BT_MBI_MCR_OFFSET, mcr);
Doesn't that fit into 80 chars?
> + if (result < 0)
> + goto iosf_mbi_read_err;
> +
> + result = pci_read_config_dword(mbi_pdev,
> + BT_MBI_MDR_OFFSET, mdr);
> + if (result < 0)
> + goto iosf_mbi_read_err;
> +
> + return 0;
> +
> +iosf_mbi_read_err:
> + dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
> + result);
If you said "PCI config access failed with %d\n", you wouldn't need the "error:" thing.
> + return result;
> +}
> +
> +/* Hold lock before calling */
> +static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
> +{
> + int result;
> +
> + if (!mbi_pdev)
> + return -ENODEV;
> +
> + result = pci_write_config_dword(mbi_pdev,
> + BT_MBI_MDR_OFFSET, mdr);
> + if (result < 0)
> + goto iosf_mbi_write_err;
> +
> + if (mcrx) {
> + result = pci_write_config_dword(mbi_pdev,
> + BT_MBI_MCRX_OFFSET, mcrx);
> + if (result < 0)
> + goto iosf_mbi_write_err;
> + }
> +
> + result = pci_write_config_dword(mbi_pdev,
> + BT_MBI_MCR_OFFSET, mcr);
> + if (result < 0)
> + goto iosf_mbi_write_err;
> +
> + return 0;
> +
> +iosf_mbi_write_err:
> + dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
> + result);
> + return result;
> +}
> +
> +int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
> +{
> + u32 mcr, mcrx;
> + unsigned long flags;
> + int ret;
> +
> + /*Access to the GFX unit is handled by GPU code */
> + BUG_ON(port == BT_MBI_UNIT_GFX);
Is that a good enough reason to crash the kernel? Maybe WARN_ON() + return error
would be sufficient?
> +
> + mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
> + mcrx = offset & BT_MBI_MASK_HI;
> +
> + spin_lock_irqsave(&iosf_mbi_lock, flags);
> + ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr);
> + spin_unlock_irqrestore(&iosf_mbi_lock, flags);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(bt_mbi_read);
> +
> +int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
> +{
> + u32 mcr, mcrx;
> + unsigned long flags;
> + int ret;
> +
> + /*Access to the GFX unit is handled by GPU code */
> + BUG_ON(port == BT_MBI_UNIT_GFX);
Same comment here.
> +
> + mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
> + mcrx = offset & BT_MBI_MASK_HI;
> +
> + spin_lock_irqsave(&iosf_mbi_lock, flags);
> + ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr);
> + spin_unlock_irqrestore(&iosf_mbi_lock, flags);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(bt_mbi_write);
> +
> +int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
> +{
> + u32 mcr, mcrx;
> + u32 value;
> + unsigned long flags;
> + int ret;
> +
> + /*Access to the GFX unit is handled by GPU code */
> + BUG_ON(port == BT_MBI_UNIT_GFX);
And here.
> +
> + mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
> + mcrx = offset & BT_MBI_MASK_HI;
> +
> + spin_lock_irqsave(&iosf_mbi_lock, flags);
> +
> + /* Read current mdr value */
> + ret = iosf_mbi_pci_read_mdr(mcrx, mcr & BT_MBI_RD_MASK, &value);
> + if (ret < 0) {
> + spin_unlock_irqrestore(&iosf_mbi_lock, flags);
> + return ret;
> + }
> +
> + /* Apply mask */
> + value &= ~mask;
> + mdr &= mask;
> + value |= mdr;
> +
> + /* Write back */
> + ret = iosf_mbi_pci_write_mdr(mcrx, mcr | BT_MBI_WR_MASK, value);
> +
> + spin_unlock_irqrestore(&iosf_mbi_lock, flags);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(bt_mbi_modify);
> +
> +static int iosf_mbi_probe(struct pci_dev *pdev,
> + const struct pci_device_id *unused)
> +{
> + int ret;
> +
> + ret = pci_enable_device(pdev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "error: could not enable device\n");
> + return ret;
> + }
> +
> + mbi_pdev = pci_dev_get(pdev);
> + return 0;
> +}
> +
> +static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = {
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) },
> + { 0, },
> +};
> +MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
> +
> +static struct pci_driver iosf_mbi_pci_driver = {
> + .name = "iosf_mbi_pci",
> + .probe = iosf_mbi_probe,
> + .id_table = iosf_mbi_pci_ids,
> +};
> +
> +static int __init bt_mbi_init(void)
> +{
> + return pci_register_driver(&iosf_mbi_pci_driver);
> +}
> +
> +static void __exit bt_mbi_exit(void)
> +{
> + pci_unregister_driver(&iosf_mbi_pci_driver);
> + if (mbi_pdev) {
> + pci_dev_put(mbi_pdev);
> + mbi_pdev = NULL;
> + }
> +}
> +
> +module_init(bt_mbi_init);
> +module_exit(bt_mbi_exit);
> +
> +MODULE_AUTHOR("David E. Box <david.e.box@xxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("BayTrail Mailbox Interface accessor");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/platform/x86/intel_baytrail.h b/drivers/platform/x86/intel_baytrail.h
> new file mode 100644
> index 0000000..8bcc311
> --- /dev/null
> +++ b/drivers/platform/x86/intel_baytrail.h
> @@ -0,0 +1,90 @@
> +/*
> + * intel_baytrail.h: MailBox access support for Intel BayTrail platforms
> + */
> +
> +#ifndef INTEL_BAYTRAIL_MBI_SYMS_H
> +#define INTEL_BAYTRAIL_MBI_SYMS_H
> +
> +#define BT_MBI_MCR_OFFSET 0xD0
> +#define BT_MBI_MDR_OFFSET 0xD4
> +#define BT_MBI_MCRX_OFFSET 0xD8
> +
> +#define BT_MBI_RD_MASK 0xFEFFFFFF
> +#define BT_MBI_WR_MASK 0X01000000
> +
> +#define BT_MBI_MASK_HI 0xFFFFFF00
> +#define BT_MBI_MASK_LO 0x000000FF
> +#define BT_MBI_ENABLE 0xF0
> +
> +/* BT-SB unit access methods */
> +#define BT_MBI_UNIT_AUNIT 0x00
> +#define BT_MBI_UNIT_SMC 0x01
> +#define BT_MBI_UNIT_CPU 0x02
> +#define BT_MBI_UNIT_BUNIT 0x03
> +#define BT_MBI_UNIT_PMC 0x04
> +#define BT_MBI_UNIT_GFX 0x06
> +#define BT_MBI_UNIT_SMI 0x0C
> +#define BT_MBI_UNIT_USB 0x43
> +#define BT_MBI_UNIT_SATA 0xA3
> +#define BT_MBI_UNIT_PCIE 0xA6
> +
> +/* Read/write opcodes */
> +#define BT_MBI_AUNIT_READ 0x10
> +#define BT_MBI_AUNIT_WRITE 0x11
> +#define BT_MBI_SMC_READ 0x10
> +#define BT_MBI_SMC_WRITE 0x11
> +#define BT_MBI_CPU_READ 0x10
> +#define BT_MBI_CPU_WRITE 0x11
> +#define BT_MBI_BUNIT_READ 0x10
> +#define BT_MBI_BUNIT_WRITE 0x11
> +#define BT_MBI_PMC_READ 0x06
> +#define BT_MBI_PMC_WRITE 0x07
> +#define BT_MBI_GFX_READ 0x00
> +#define BT_MBI_GFX_WRITE 0x01
> +#define BT_MBI_SMIO_READ 0x06
> +#define BT_MBI_SMIO_WRITE 0x07
> +#define BT_MBI_USB_READ 0x06
> +#define BT_MBI_USB_WRITE 0x07
> +#define BT_MBI_SATA_READ 0x00
> +#define BT_MBI_SATA_WRITE 0x01
> +#define BT_MBI_PCIE_READ 0x00
> +#define BT_MBI_PCIE_WRITE 0x01
> +
> +/**
> + * bt_mbi_read() - MailBox Interface read command
> + * @port: port indicating subunit being accessed
> + * @opcode: port specific read or write opcode
> + * @offset: register address offset
> + * @mdr: register data to be read
> + *
> + * Locking is handled by spinlock - cannot sleep.
> + * Return: Nonzero on error
> + */
> +int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
> +
> +/**
> + * bt_mbi_write() - MailBox unmasked write command
> + * @port: port indicating subunit being accessed
> + * @opcode: port specific read or write opcode
> + * @offset: register address offset
> + * @mdr: register data to be written
> + *
> + * Locking is handled by spinlock - cannot sleep.
> + * Return: Nonzero on error
> + */
> +int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
> +
> +/**
> + * bt_mbi_modify() - MailBox masked write command
> + * @port: port indicating subunit being accessed
> + * @opcode: port specific read or write opcode
> + * @offset: register address offset
> + * @mdr: register data being modified
> + * @mask: mask indicating bits in mdr to be modified
> + *
> + * Locking is handled by spinlock - cannot sleep.
> + * Return: Nonzero on error
> + */
> +int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
> +
> +#endif /* INTEL_BAYTRAIL_MBI_SYMS_H */
Are the users of the interface supposed to include this file?
Rafael
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
