The HP watchdog timer driver binds to the HP iLO system support controller
PCI device. This PCI device actually supports a wider range of
functionality, so give the driver a more generic name and move it to the x86
platform driver directory in preparation for the following changes.
Signed-off-by: Matthew Garrett <matthew.garrett@xxxxxxxxxx>
---
drivers/platform/x86/Kconfig | 20 +
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/hpilo_support.c | 890 +++++++++++++++++++++++++++++++++++
drivers/watchdog/Kconfig | 18 -
drivers/watchdog/Makefile | 1 -
drivers/watchdog/hpwdt.c | 890 -----------------------------------
6 files changed, 911 insertions(+), 909 deletions(-)
create mode 100644 drivers/platform/x86/hpilo_support.c
delete mode 100644 drivers/watchdog/hpwdt.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 36a9e60..34e6a47 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -817,4 +817,24 @@ config PVPANIC
a paravirtualized device provided by QEMU; it lets a virtual machine
(guest) communicate panic events to the host.
+config HP_ILO_SUPPORT
+ tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
+ depends on X86 && PCI
+ help
+ A software monitoring watchdog and NMI sourcing driver. This driver
+ will detect lockups and provide a stack trace. This is a driver that
+ will only load on an HP ProLiant system with a minimum of iLO2 support.
+
+ To compile this driver as a module, choose M here: the module will be
+ called hpilo_support.
+
+config HPWDT_NMI_DECODING
+ bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+ depends on HP_ILO_SUPPORT
+ default y
+ help
+ When an NMI occurs this feature will make the necessary BIOS calls to
+ log the cause of the NMI.
+
+
endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 5dbe193..9198df2 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_ACCEL) += hp_accel.o
+obj-$(CONFIG_HPILO_SUPPORT) += hpilo_support.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
diff --git a/drivers/platform/x86/hpilo_support.c b/drivers/platform/x86/hpilo_support.c
new file mode 100644
index 0000000..de7e4f4
--- /dev/null
+++ b/drivers/platform/x86/hpilo_support.c
@@ -0,0 +1,890 @@
+/*
+ * HP WatchDog Driver
+ * based on
+ *
+ * SoftDog 0.05: A Software Watchdog Device
+ *
+ * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ * Thomas Mingarelli <thomas.mingarelli@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#ifdef CONFIG_HPWDT_NMI_DECODING
+#include <linux/dmi.h>
+#include <linux/spinlock.h>
+#include <linux/nmi.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <asm/cacheflush.h>
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+#include <asm/nmi.h>
+
+#define HPWDT_VERSION "1.3.2"
+#define SECS_TO_TICKS(secs) ((secs) * 1000 / 128)
+#define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000)
+#define HPWDT_MAX_TIMER TICKS_TO_SECS(65535)
+#define DEFAULT_MARGIN 30
+
+static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
+static unsigned int reload; /* the computed soft_margin */
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static char expect_release;
+static unsigned long hpwdt_is_open;
+
+static void __iomem *pci_mem_addr; /* the PCI-memory address */
+static unsigned long __iomem *hpwdt_timer_reg;
+static unsigned long __iomem *hpwdt_timer_con;
+
+static DEFINE_PCI_DEVICE_TABLE(hpwdt_devices) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
+ { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
+ {0}, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
+#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
+#define PCI_BIOS32_PARAGRAPH_LEN 16
+#define PCI_ROM_BASE1 0x000F0000
+#define ROM_SIZE 0x10000
+
+struct bios32_service_dir {
+ u32 signature;
+ u32 entry_point;
+ u8 revision;
+ u8 length;
+ u8 checksum;
+ u8 reserved[5];
+};
+
+/* type 212 */
+struct smbios_cru64_info {
+ u8 type;
+ u8 byte_length;
+ u16 handle;
+ u32 signature;
+ u64 physical_address;
+ u32 double_length;
+ u32 double_offset;
+};
+#define SMBIOS_CRU64_INFORMATION 212
+
+/* type 219 */
+struct smbios_proliant_info {
+ u8 type;
+ u8 byte_length;
+ u16 handle;
+ u32 power_features;
+ u32 omega_features;
+ u32 reserved;
+ u32 misc_features;
+};
+#define SMBIOS_ICRU_INFORMATION 219
+
+
+struct cmn_registers {
+ union {
+ struct {
+ u8 ral;
+ u8 rah;
+ u16 rea2;
+ };
+ u32 reax;
+ } u1;
+ union {
+ struct {
+ u8 rbl;
+ u8 rbh;
+ u8 reb2l;
+ u8 reb2h;
+ };
+ u32 rebx;
+ } u2;
+ union {
+ struct {
+ u8 rcl;
+ u8 rch;
+ u16 rec2;
+ };
+ u32 recx;
+ } u3;
+ union {
+ struct {
+ u8 rdl;
+ u8 rdh;
+ u16 red2;
+ };
+ u32 redx;
+ } u4;
+
+ u32 resi;
+ u32 redi;
+ u16 rds;
+ u16 res;
+ u32 reflags;
+} __attribute__((packed));
+
+static unsigned int hpwdt_nmi_decoding;
+static unsigned int allow_kdump = 1;
+static unsigned int is_icru;
+static unsigned int is_uefi;
+static DEFINE_SPINLOCK(rom_lock);
+static void *cru_rom_addr;
+static struct cmn_registers cmn_regs;
+
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry);
+
+#ifdef CONFIG_X86_32
+/* --32 Bit Bios------------------------------------------------------------ */
+
+#define HPWDT_ARCH 32
+
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushl %ebp \n\t"
+ "movl %esp, %ebp \n\t"
+ "pusha \n\t"
+ "pushf \n\t"
+ "push %es \n\t"
+ "push %ds \n\t"
+ "pop %es \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl 4(%eax),%ebx \n\t"
+ "movl 8(%eax),%ecx \n\t"
+ "movl 12(%eax),%edx \n\t"
+ "movl 16(%eax),%esi \n\t"
+ "movl 20(%eax),%edi \n\t"
+ "movl (%eax),%eax \n\t"
+ "push %cs \n\t"
+ "call *12(%ebp) \n\t"
+ "pushf \n\t"
+ "pushl %eax \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl %ebx,4(%eax) \n\t"
+ "movl %ecx,8(%eax) \n\t"
+ "movl %edx,12(%eax) \n\t"
+ "movl %esi,16(%eax) \n\t"
+ "movl %edi,20(%eax) \n\t"
+ "movw %ds,24(%eax) \n\t"
+ "movw %es,26(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,28(%eax) \n\t"
+ "pop %es \n\t"
+ "popf \n\t"
+ "popa \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
+
+
+/*
+ * cru_detect
+ *
+ * Routine Description:
+ * This function uses the 32-bit BIOS Service Directory record to
+ * search for a $CRU record.
+ *
+ * Return Value:
+ * 0 : SUCCESS
+ * <0 : FAILURE
+ */
+static int cru_detect(unsigned long map_entry,
+ unsigned long map_offset)
+{
+ void *bios32_map;
+ unsigned long *bios32_entrypoint;
+ unsigned long cru_physical_address;
+ unsigned long cru_length;
+ unsigned long physical_bios_base = 0;
+ unsigned long physical_bios_offset = 0;
+ int retval = -ENODEV;
+
+ bios32_map = ioremap(map_entry, (2 * PAGE_SIZE));
+
+ if (bios32_map == NULL)
+ return -ENODEV;
+
+ bios32_entrypoint = bios32_map + map_offset;
+
+ cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
+
+ set_memory_x((unsigned long)bios32_map, 2);
+ asminline_call(&cmn_regs, bios32_entrypoint);
+
+ if (cmn_regs.u1.ral != 0) {
+ pr_warn("Call succeeded but with an error: 0x%x\n",
+ cmn_regs.u1.ral);
+ } else {
+ physical_bios_base = cmn_regs.u2.rebx;
+ physical_bios_offset = cmn_regs.u4.redx;
+ cru_length = cmn_regs.u3.recx;
+ cru_physical_address =
+ physical_bios_base + physical_bios_offset;
+
+ /* If the values look OK, then map it in. */
+ if ((physical_bios_base + physical_bios_offset)) {
+ cru_rom_addr =
+ ioremap(cru_physical_address, cru_length);
+ if (cru_rom_addr) {
+ set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+ (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT);
+ retval = 0;
+ }
+ }
+
+ pr_debug("CRU Base Address: 0x%lx\n", physical_bios_base);
+ pr_debug("CRU Offset Address: 0x%lx\n", physical_bios_offset);
+ pr_debug("CRU Length: 0x%lx\n", cru_length);
+ pr_debug("CRU Mapped Address: %p\n", &cru_rom_addr);
+ }
+ iounmap(bios32_map);
+ return retval;
+}
+
+/*
+ * bios_checksum
+ */
+static int bios_checksum(const char __iomem *ptr, int len)
+{
+ char sum = 0;
+ int i;
+
+ /*
+ * calculate checksum of size bytes. This should add up
+ * to zero if we have a valid header.
+ */
+ for (i = 0; i < len; i++)
+ sum += ptr[i];
+
+ return ((sum == 0) && (len > 0));
+}
+
+/*
+ * bios32_present
+ *
+ * Routine Description:
+ * This function finds the 32-bit BIOS Service Directory
+ *
+ * Return Value:
+ * 0 : SUCCESS
+ * <0 : FAILURE
+ */
+static int bios32_present(const char __iomem *p)
+{
+ struct bios32_service_dir *bios_32_ptr;
+ int length;
+ unsigned long map_entry, map_offset;
+
+ bios_32_ptr = (struct bios32_service_dir *) p;
+
+ /*
+ * Search for signature by checking equal to the swizzled value
+ * instead of calling another routine to perform a strcmp.
+ */
+ if (bios_32_ptr->signature == PCI_BIOS32_SD_VALUE) {
+ length = bios_32_ptr->length * PCI_BIOS32_PARAGRAPH_LEN;
+ if (bios_checksum(p, length)) {
+ /*
+ * According to the spec, we're looking for the
+ * first 4KB-aligned address below the entrypoint
+ * listed in the header. The Service Directory code
+ * is guaranteed to occupy no more than 2 4KB pages.
+ */
+ map_entry = bios_32_ptr->entry_point & ~(PAGE_SIZE - 1);
+ map_offset = bios_32_ptr->entry_point - map_entry;
+
+ return cru_detect(map_entry, map_offset);
+ }
+ }
+ return -ENODEV;
+}
+
+static int detect_cru_service(void)
+{
+ char __iomem *p, *q;
+ int rc = -1;
+
+ /*
+ * Search from 0x0f0000 through 0x0fffff, inclusive.
+ */
+ p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
+ if (p == NULL)
+ return -ENOMEM;
+
+ for (q = p; q < p + ROM_SIZE; q += 16) {
+ rc = bios32_present(q);
+ if (!rc)
+ break;
+ }
+ iounmap(p);
+ return rc;
+}
+/* ------------------------------------------------------------------------- */
+#endif /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_64
+/* --64 Bit Bios------------------------------------------------------------ */
+
+#define HPWDT_ARCH 64
+
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushq %rbp \n\t"
+ "movq %rsp, %rbp \n\t"
+ "pushq %rax \n\t"
+ "pushq %rbx \n\t"
+ "pushq %rdx \n\t"
+ "pushq %r12 \n\t"
+ "pushq %r9 \n\t"
+ "movq %rsi, %r12 \n\t"
+ "movq %rdi, %r9 \n\t"
+ "movl 4(%r9),%ebx \n\t"
+ "movl 8(%r9),%ecx \n\t"
+ "movl 12(%r9),%edx \n\t"
+ "movl 16(%r9),%esi \n\t"
+ "movl 20(%r9),%edi \n\t"
+ "movl (%r9),%eax \n\t"
+ "call *%r12 \n\t"
+ "pushfq \n\t"
+ "popq %r12 \n\t"
+ "movl %eax, (%r9) \n\t"
+ "movl %ebx, 4(%r9) \n\t"
+ "movl %ecx, 8(%r9) \n\t"
+ "movl %edx, 12(%r9) \n\t"
+ "movl %esi, 16(%r9) \n\t"
+ "movl %edi, 20(%r9) \n\t"
+ "movq %r12, %rax \n\t"
+ "movl %eax, 28(%r9) \n\t"
+ "popq %r9 \n\t"
+ "popq %r12 \n\t"
+ "popq %rdx \n\t"
+ "popq %rbx \n\t"
+ "popq %rax \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
+
+/*
+ * dmi_find_cru
+ *
+ * Routine Description:
+ * This function checks whether or not a SMBIOS/DMI record is
+ * the 64bit CRU info or not
+ */
+static void dmi_find_cru(const struct dmi_header *dm, void *dummy)
+{
+ struct smbios_cru64_info *smbios_cru64_ptr;
+ unsigned long cru_physical_address;
+
+ if (dm->type == SMBIOS_CRU64_INFORMATION) {
+ smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
+ if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
+ cru_physical_address =
+ smbios_cru64_ptr->physical_address +
+ smbios_cru64_ptr->double_offset;
+ cru_rom_addr = ioremap(cru_physical_address,
+ smbios_cru64_ptr->double_length);
+ set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+ smbios_cru64_ptr->double_length >> PAGE_SHIFT);
+ }
+ }
+}
+
+static int detect_cru_service(void)
+{
+ cru_rom_addr = NULL;
+
+ dmi_walk(dmi_find_cru, NULL);
+
+ /* if cru_rom_addr has been set then we found a CRU service */
+ return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
+}
+/* ------------------------------------------------------------------------- */
+#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+/*
+ * Watchdog operations
+ */
+static void hpwdt_start(void)
+{
+ reload = SECS_TO_TICKS(soft_margin);
+ iowrite16(reload, hpwdt_timer_reg);
+ iowrite8(0x85, hpwdt_timer_con);
+}
+
+static void hpwdt_stop(void)
+{
+ unsigned long data;
+
+ data = ioread8(hpwdt_timer_con);
+ data &= 0xFE;
+ iowrite8(data, hpwdt_timer_con);
+}
+
+static void hpwdt_ping(void)
+{
+ iowrite16(reload, hpwdt_timer_reg);
+}
+
+static int hpwdt_change_timer(int new_margin)
+{
+ if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) {
+ pr_warn("New value passed in is invalid: %d seconds\n",
+ new_margin);
+ return -EINVAL;
+ }
+
+ soft_margin = new_margin;
+ pr_debug("New timer passed in is %d seconds\n", new_margin);
+ reload = SECS_TO_TICKS(soft_margin);
+
+ return 0;
+}
+
+static int hpwdt_time_left(void)
+{
+ return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
+}
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+/*
+ * NMI Handler
+ */
+static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
+{
+ unsigned long rom_pl;
+ static int die_nmi_called;
+
+ if (!hpwdt_nmi_decoding)
+ goto out;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called && !is_icru && !is_uefi)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+
+ if (allow_kdump)
+ hpwdt_stop();
+
+ if (!is_icru && !is_uefi) {
+ if (cmn_regs.u1.ral == 0) {
+ panic("An NMI occurred, "
+ "but unable to determine source.\n");
+ }
+ }
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
+
+out:
+ return NMI_DONE;
+}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+/*
+ * /dev/watchdog handling
+ */
+static int hpwdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &hpwdt_is_open))
+ return -EBUSY;
+
+ /* Start the watchdog */
+ hpwdt_start();
+ hpwdt_ping();
+
+ return nonseekable_open(inode, file);
+}
+
+static int hpwdt_release(struct inode *inode, struct file *file)
+{
+ /* Stop the watchdog */
+ if (expect_release == 42) {
+ hpwdt_stop();
+ } else {
+ pr_crit("Unexpected close, not stopping watchdog!\n");
+ hpwdt_ping();
+ }
+
+ expect_release = 0;
+
+ /* /dev/watchdog is being closed, make sure it can be re-opened */
+ clear_bit(0, &hpwdt_is_open);
+
+ return 0;
+}
+
+static ssize_t hpwdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
+ expect_release = 0;
+
+ /* scan to see whether or not we got the magic char. */
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_release = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ hpwdt_ping();
+ }
+
+ return len;
+}
+
+static const struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .identity = "HP iLO2+ HW Watchdog Timer",
+};
+
+static long hpwdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_margin;
+ int ret = -ENOTTY;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = 0;
+ if (copy_to_user(argp, &ident, sizeof(ident)))
+ ret = -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(0, p);
+ break;
+
+ case WDIOC_KEEPALIVE:
+ hpwdt_ping();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(new_margin, p);
+ if (ret)
+ break;
+
+ ret = hpwdt_change_timer(new_margin);
+ if (ret)
+ break;
+
+ hpwdt_ping();
+ /* Fall */
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(soft_margin, p);
+ break;
+
+ case WDIOC_GETTIMELEFT:
+ ret = put_user(hpwdt_time_left(), p);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Kernel interfaces
+ */
+static const struct file_operations hpwdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = hpwdt_write,
+ .unlocked_ioctl = hpwdt_ioctl,
+ .open = hpwdt_open,
+ .release = hpwdt_release,
+};
+
+static struct miscdevice hpwdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &hpwdt_fops,
+};
+
+/*
+ * Init & Exit
+ */
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+#ifdef CONFIG_X86_LOCAL_APIC
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
+{
+ /*
+ * If nmi_watchdog is turned off then we can turn on
+ * our nmi decoding capability.
+ */
+ hpwdt_nmi_decoding = 1;
+}
+#else
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
+{
+ dev_warn(&dev->dev, "NMI decoding is disabled. "
+ "Your kernel does not support a NMI Watchdog.\n");
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+/*
+ * dmi_find_icru
+ *
+ * Routine Description:
+ * This function checks whether or not we are on an iCRU-based server.
+ * This check is independent of architecture and needs to be made for
+ * any ProLiant system.
+ */
+static void dmi_find_icru(const struct dmi_header *dm, void *dummy)
+{
+ struct smbios_proliant_info *smbios_proliant_ptr;
+
+ if (dm->type == SMBIOS_ICRU_INFORMATION) {
+ smbios_proliant_ptr = (struct smbios_proliant_info *) dm;
+ if (smbios_proliant_ptr->misc_features & 0x01)
+ is_icru = 1;
+ if (smbios_proliant_ptr->misc_features & 0x408)
+ is_uefi = 1;
+ }
+}
+
+static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
+{
+ int retval;
+
+ /*
+ * On typical CRU-based systems we need to map that service in
+ * the BIOS. For 32 bit Operating Systems we need to go through
+ * the 32 Bit BIOS Service Directory. For 64 bit Operating
+ * Systems we get that service through SMBIOS.
+ *
+ * On systems that support the new iCRU service all we need to
+ * do is call dmi_walk to get the supported flag value and skip
+ * the old cru detect code.
+ */
+ dmi_walk(dmi_find_icru, NULL);
+ if (!is_icru && !is_uefi) {
+
+ /*
+ * We need to map the ROM to get the CRU service.
+ * For 32 bit Operating Systems we need to go through the 32 Bit
+ * BIOS Service Directory
+ * For 64 bit Operating Systems we get that service through SMBIOS.
+ */
+ retval = detect_cru_service();
+ if (retval < 0) {
+ dev_warn(&dev->dev,
+ "Unable to detect the %d Bit CRU Service.\n",
+ HPWDT_ARCH);
+ return retval;
+ }
+
+ /*
+ * We know this is the only CRU call we need to make so lets keep as
+ * few instructions as possible once the NMI comes in.
+ */
+ cmn_regs.u1.rah = 0x0D;
+ cmn_regs.u1.ral = 0x02;
+ }
+
+ /*
+ * Only one function can register for NMI_UNKNOWN
+ */
+ retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt");
+ if (retval)
+ goto error;
+ retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt");
+ if (retval)
+ goto error1;
+ retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt");
+ if (retval)
+ goto error2;
+
+ dev_info(&dev->dev,
+ "HP Watchdog Timer Driver: NMI decoding initialized"
+ ", allow kernel dump: %s (default = 0/OFF)\n",
+ (allow_kdump == 0) ? "OFF" : "ON");
+ return 0;
+
+error2:
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+error1:
+ unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+error:
+ dev_warn(&dev->dev,
+ "Unable to register a die notifier (err=%d).\n",
+ retval);
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
+ return retval;
+}
+
+static void hpwdt_exit_nmi_decoding(void)
+{
+ unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+ unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
+ if (cru_rom_addr)
+ iounmap(cru_rom_addr);
+}
+#else /* !CONFIG_HPWDT_NMI_DECODING */
+static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
+{
+}
+
+static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static void hpwdt_exit_nmi_decoding(void)
+{
+}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+static int hpwdt_init_one(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int retval;
+
+ /*
+ * Check if we can do NMI decoding or not
+ */
+ hpwdt_check_nmi_decoding(dev);
+
+ /*
+ * First let's find out if we are on an iLO2+ server. We will
+ * not run on a legacy ASM box.
+ * So we only support the G5 ProLiant servers and higher.
+ */
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
+ dev_warn(&dev->dev,
+ "This server does not have an iLO2+ ASIC.\n");
+ return -ENODEV;
+ }
+
+ if (pci_enable_device(dev)) {
+ dev_warn(&dev->dev,
+ "Not possible to enable PCI Device: 0x%x:0x%x.\n",
+ ent->vendor, ent->device);
+ return -ENODEV;
+ }
+
+ pci_mem_addr = pci_iomap(dev, 1, 0x80);
+ if (!pci_mem_addr) {
+ dev_warn(&dev->dev,
+ "Unable to detect the iLO2+ server memory.\n");
+ retval = -ENOMEM;
+ goto error_pci_iomap;
+ }
+ hpwdt_timer_reg = pci_mem_addr + 0x70;
+ hpwdt_timer_con = pci_mem_addr + 0x72;
+
+ /* Make sure that timer is disabled until /dev/watchdog is opened */
+ hpwdt_stop();
+
+ /* Make sure that we have a valid soft_margin */
+ if (hpwdt_change_timer(soft_margin))
+ hpwdt_change_timer(DEFAULT_MARGIN);
+
+ /* Initialize NMI Decoding functionality */
+ retval = hpwdt_init_nmi_decoding(dev);
+ if (retval != 0)
+ goto error_init_nmi_decoding;
+
+ retval = misc_register(&hpwdt_miscdev);
+ if (retval < 0) {
+ dev_warn(&dev->dev,
+ "Unable to register miscdev on minor=%d (err=%d).\n",
+ WATCHDOG_MINOR, retval);
+ goto error_misc_register;
+ }
+
+ dev_info(&dev->dev, "HP Watchdog Timer Driver: %s"
+ ", timer margin: %d seconds (nowayout=%d).\n",
+ HPWDT_VERSION, soft_margin, nowayout);
+ return 0;
+
+error_misc_register:
+ hpwdt_exit_nmi_decoding();
+error_init_nmi_decoding:
+ pci_iounmap(dev, pci_mem_addr);
+error_pci_iomap:
+ pci_disable_device(dev);
+ return retval;
+}
+
+static void hpwdt_exit(struct pci_dev *dev)
+{
+ if (!nowayout)
+ hpwdt_stop();
+
+ misc_deregister(&hpwdt_miscdev);
+ hpwdt_exit_nmi_decoding();
+ pci_iounmap(dev, pci_mem_addr);
+ pci_disable_device(dev);
+}
+
+static struct pci_driver hpwdt_driver = {
+ .name = "hpwdt",
+ .id_table = hpwdt_devices,
+ .probe = hpwdt_init_one,
+ .remove = hpwdt_exit,
+};
+
+MODULE_AUTHOR("Tom Mingarelli");
+MODULE_DESCRIPTION("hp watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HPWDT_VERSION);
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+module_param(soft_margin, int, 0);
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+#endif /* !CONFIG_HPWDT_NMI_DECODING */
+
+module_pci_driver(hpwdt_driver);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 362085d..a4e2823 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -668,16 +668,6 @@ config IT87_WDT
To compile this driver as a module, choose M here: the module will
be called it87_wdt.
-config HP_WATCHDOG
- tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
- depends on X86 && PCI
- help
- A software monitoring watchdog and NMI sourcing driver. This driver
- will detect lockups and provide a stack trace. This is a driver that
- will only load on an HP ProLiant system with a minimum of iLO2 support.
- To compile this driver as a module, choose M here: the module will be
- called hpwdt.
-
config KEMPLD_WDT
tristate "Kontron COM Watchdog Timer"
depends on MFD_KEMPLD
@@ -689,14 +679,6 @@ config KEMPLD_WDT
This driver can also be built as a module. If so, the module will be
called kempld_wdt.
-config HPWDT_NMI_DECODING
- bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
- depends on HP_WATCHDOG
- default y
- help
- When an NMI occurs this feature will make the necessary BIOS calls to
- log the cause of the NMI.
-
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2f26a0b..bb20ee0 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -89,7 +89,6 @@ obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
endif
obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
obj-$(CONFIG_IT87_WDT) += it87_wdt.o
-obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
obj-$(CONFIG_KEMPLD_WDT) += kempld_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
deleted file mode 100644
index de7e4f4..0000000
--- a/drivers/watchdog/hpwdt.c
+++ /dev/null
@@ -1,890 +0,0 @@
-/*
- * HP WatchDog Driver
- * based on
- *
- * SoftDog 0.05: A Software Watchdog Device
- *
- * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
- * Thomas Mingarelli <thomas.mingarelli@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/watchdog.h>
-#ifdef CONFIG_HPWDT_NMI_DECODING
-#include <linux/dmi.h>
-#include <linux/spinlock.h>
-#include <linux/nmi.h>
-#include <linux/kdebug.h>
-#include <linux/notifier.h>
-#include <asm/cacheflush.h>
-#endif /* CONFIG_HPWDT_NMI_DECODING */
-#include <asm/nmi.h>
-
-#define HPWDT_VERSION "1.3.2"
-#define SECS_TO_TICKS(secs) ((secs) * 1000 / 128)
-#define TICKS_TO_SECS(ticks) ((ticks) * 128 / 1000)
-#define HPWDT_MAX_TIMER TICKS_TO_SECS(65535)
-#define DEFAULT_MARGIN 30
-
-static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
-static unsigned int reload; /* the computed soft_margin */
-static bool nowayout = WATCHDOG_NOWAYOUT;
-static char expect_release;
-static unsigned long hpwdt_is_open;
-
-static void __iomem *pci_mem_addr; /* the PCI-memory address */
-static unsigned long __iomem *hpwdt_timer_reg;
-static unsigned long __iomem *hpwdt_timer_con;
-
-static DEFINE_PCI_DEVICE_TABLE(hpwdt_devices) = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
- { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
- {0}, /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, hpwdt_devices);
-
-#ifdef CONFIG_HPWDT_NMI_DECODING
-#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
-#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
-#define PCI_BIOS32_PARAGRAPH_LEN 16
-#define PCI_ROM_BASE1 0x000F0000
-#define ROM_SIZE 0x10000
-
-struct bios32_service_dir {
- u32 signature;
- u32 entry_point;
- u8 revision;
- u8 length;
- u8 checksum;
- u8 reserved[5];
-};
-
-/* type 212 */
-struct smbios_cru64_info {
- u8 type;
- u8 byte_length;
- u16 handle;
- u32 signature;
- u64 physical_address;
- u32 double_length;
- u32 double_offset;
-};
-#define SMBIOS_CRU64_INFORMATION 212
-
-/* type 219 */
-struct smbios_proliant_info {
- u8 type;
- u8 byte_length;
- u16 handle;
- u32 power_features;
- u32 omega_features;
- u32 reserved;
- u32 misc_features;
-};
-#define SMBIOS_ICRU_INFORMATION 219
-
-
-struct cmn_registers {
- union {
- struct {
- u8 ral;
- u8 rah;
- u16 rea2;
- };
- u32 reax;
- } u1;
- union {
- struct {
- u8 rbl;
- u8 rbh;
- u8 reb2l;
- u8 reb2h;
- };
- u32 rebx;
- } u2;
- union {
- struct {
- u8 rcl;
- u8 rch;
- u16 rec2;
- };
- u32 recx;
- } u3;
- union {
- struct {
- u8 rdl;
- u8 rdh;
- u16 red2;
- };
- u32 redx;
- } u4;
-
- u32 resi;
- u32 redi;
- u16 rds;
- u16 res;
- u32 reflags;
-} __attribute__((packed));
-
-static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump = 1;
-static unsigned int is_icru;
-static unsigned int is_uefi;
-static DEFINE_SPINLOCK(rom_lock);
-static void *cru_rom_addr;
-static struct cmn_registers cmn_regs;
-
-extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry);
-
-#ifdef CONFIG_X86_32
-/* --32 Bit Bios------------------------------------------------------------ */
-
-#define HPWDT_ARCH 32
-
-asm(".text \n\t"
- ".align 4 \n"
- "asminline_call: \n\t"
- "pushl %ebp \n\t"
- "movl %esp, %ebp \n\t"
- "pusha \n\t"
- "pushf \n\t"
- "push %es \n\t"
- "push %ds \n\t"
- "pop %es \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl 4(%eax),%ebx \n\t"
- "movl 8(%eax),%ecx \n\t"
- "movl 12(%eax),%edx \n\t"
- "movl 16(%eax),%esi \n\t"
- "movl 20(%eax),%edi \n\t"
- "movl (%eax),%eax \n\t"
- "push %cs \n\t"
- "call *12(%ebp) \n\t"
- "pushf \n\t"
- "pushl %eax \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl %ebx,4(%eax) \n\t"
- "movl %ecx,8(%eax) \n\t"
- "movl %edx,12(%eax) \n\t"
- "movl %esi,16(%eax) \n\t"
- "movl %edi,20(%eax) \n\t"
- "movw %ds,24(%eax) \n\t"
- "movw %es,26(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,28(%eax) \n\t"
- "pop %es \n\t"
- "popf \n\t"
- "popa \n\t"
- "leave \n\t"
- "ret \n\t"
- ".previous");
-
-
-/*
- * cru_detect
- *
- * Routine Description:
- * This function uses the 32-bit BIOS Service Directory record to
- * search for a $CRU record.
- *
- * Return Value:
- * 0 : SUCCESS
- * <0 : FAILURE
- */
-static int cru_detect(unsigned long map_entry,
- unsigned long map_offset)
-{
- void *bios32_map;
- unsigned long *bios32_entrypoint;
- unsigned long cru_physical_address;
- unsigned long cru_length;
- unsigned long physical_bios_base = 0;
- unsigned long physical_bios_offset = 0;
- int retval = -ENODEV;
-
- bios32_map = ioremap(map_entry, (2 * PAGE_SIZE));
-
- if (bios32_map == NULL)
- return -ENODEV;
-
- bios32_entrypoint = bios32_map + map_offset;
-
- cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
-
- set_memory_x((unsigned long)bios32_map, 2);
- asminline_call(&cmn_regs, bios32_entrypoint);
-
- if (cmn_regs.u1.ral != 0) {
- pr_warn("Call succeeded but with an error: 0x%x\n",
- cmn_regs.u1.ral);
- } else {
- physical_bios_base = cmn_regs.u2.rebx;
- physical_bios_offset = cmn_regs.u4.redx;
- cru_length = cmn_regs.u3.recx;
- cru_physical_address =
- physical_bios_base + physical_bios_offset;
-
- /* If the values look OK, then map it in. */
- if ((physical_bios_base + physical_bios_offset)) {
- cru_rom_addr =
- ioremap(cru_physical_address, cru_length);
- if (cru_rom_addr) {
- set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
- (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT);
- retval = 0;
- }
- }
-
- pr_debug("CRU Base Address: 0x%lx\n", physical_bios_base);
- pr_debug("CRU Offset Address: 0x%lx\n", physical_bios_offset);
- pr_debug("CRU Length: 0x%lx\n", cru_length);
- pr_debug("CRU Mapped Address: %p\n", &cru_rom_addr);
- }
- iounmap(bios32_map);
- return retval;
-}
-
-/*
- * bios_checksum
- */
-static int bios_checksum(const char __iomem *ptr, int len)
-{
- char sum = 0;
- int i;
-
- /*
- * calculate checksum of size bytes. This should add up
- * to zero if we have a valid header.
- */
- for (i = 0; i < len; i++)
- sum += ptr[i];
-
- return ((sum == 0) && (len > 0));
-}
-
-/*
- * bios32_present
- *
- * Routine Description:
- * This function finds the 32-bit BIOS Service Directory
- *
- * Return Value:
- * 0 : SUCCESS
- * <0 : FAILURE
- */
-static int bios32_present(const char __iomem *p)
-{
- struct bios32_service_dir *bios_32_ptr;
- int length;
- unsigned long map_entry, map_offset;
-
- bios_32_ptr = (struct bios32_service_dir *) p;
-
- /*
- * Search for signature by checking equal to the swizzled value
- * instead of calling another routine to perform a strcmp.
- */
- if (bios_32_ptr->signature == PCI_BIOS32_SD_VALUE) {
- length = bios_32_ptr->length * PCI_BIOS32_PARAGRAPH_LEN;
- if (bios_checksum(p, length)) {
- /*
- * According to the spec, we're looking for the
- * first 4KB-aligned address below the entrypoint
- * listed in the header. The Service Directory code
- * is guaranteed to occupy no more than 2 4KB pages.
- */
- map_entry = bios_32_ptr->entry_point & ~(PAGE_SIZE - 1);
- map_offset = bios_32_ptr->entry_point - map_entry;
-
- return cru_detect(map_entry, map_offset);
- }
- }
- return -ENODEV;
-}
-
-static int detect_cru_service(void)
-{
- char __iomem *p, *q;
- int rc = -1;
-
- /*
- * Search from 0x0f0000 through 0x0fffff, inclusive.
- */
- p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
- if (p == NULL)
- return -ENOMEM;
-
- for (q = p; q < p + ROM_SIZE; q += 16) {
- rc = bios32_present(q);
- if (!rc)
- break;
- }
- iounmap(p);
- return rc;
-}
-/* ------------------------------------------------------------------------- */
-#endif /* CONFIG_X86_32 */
-#ifdef CONFIG_X86_64
-/* --64 Bit Bios------------------------------------------------------------ */
-
-#define HPWDT_ARCH 64
-
-asm(".text \n\t"
- ".align 4 \n"
- "asminline_call: \n\t"
- "pushq %rbp \n\t"
- "movq %rsp, %rbp \n\t"
- "pushq %rax \n\t"
- "pushq %rbx \n\t"
- "pushq %rdx \n\t"
- "pushq %r12 \n\t"
- "pushq %r9 \n\t"
- "movq %rsi, %r12 \n\t"
- "movq %rdi, %r9 \n\t"
- "movl 4(%r9),%ebx \n\t"
- "movl 8(%r9),%ecx \n\t"
- "movl 12(%r9),%edx \n\t"
- "movl 16(%r9),%esi \n\t"
- "movl 20(%r9),%edi \n\t"
- "movl (%r9),%eax \n\t"
- "call *%r12 \n\t"
- "pushfq \n\t"
- "popq %r12 \n\t"
- "movl %eax, (%r9) \n\t"
- "movl %ebx, 4(%r9) \n\t"
- "movl %ecx, 8(%r9) \n\t"
- "movl %edx, 12(%r9) \n\t"
- "movl %esi, 16(%r9) \n\t"
- "movl %edi, 20(%r9) \n\t"
- "movq %r12, %rax \n\t"
- "movl %eax, 28(%r9) \n\t"
- "popq %r9 \n\t"
- "popq %r12 \n\t"
- "popq %rdx \n\t"
- "popq %rbx \n\t"
- "popq %rax \n\t"
- "leave \n\t"
- "ret \n\t"
- ".previous");
-
-/*
- * dmi_find_cru
- *
- * Routine Description:
- * This function checks whether or not a SMBIOS/DMI record is
- * the 64bit CRU info or not
- */
-static void dmi_find_cru(const struct dmi_header *dm, void *dummy)
-{
- struct smbios_cru64_info *smbios_cru64_ptr;
- unsigned long cru_physical_address;
-
- if (dm->type == SMBIOS_CRU64_INFORMATION) {
- smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
- if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
- cru_physical_address =
- smbios_cru64_ptr->physical_address +
- smbios_cru64_ptr->double_offset;
- cru_rom_addr = ioremap(cru_physical_address,
- smbios_cru64_ptr->double_length);
- set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
- smbios_cru64_ptr->double_length >> PAGE_SHIFT);
- }
- }
-}
-
-static int detect_cru_service(void)
-{
- cru_rom_addr = NULL;
-
- dmi_walk(dmi_find_cru, NULL);
-
- /* if cru_rom_addr has been set then we found a CRU service */
- return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
-}
-/* ------------------------------------------------------------------------- */
-#endif /* CONFIG_X86_64 */
-#endif /* CONFIG_HPWDT_NMI_DECODING */
-
-/*
- * Watchdog operations
- */
-static void hpwdt_start(void)
-{
- reload = SECS_TO_TICKS(soft_margin);
- iowrite16(reload, hpwdt_timer_reg);
- iowrite8(0x85, hpwdt_timer_con);
-}
-
-static void hpwdt_stop(void)
-{
- unsigned long data;
-
- data = ioread8(hpwdt_timer_con);
- data &= 0xFE;
- iowrite8(data, hpwdt_timer_con);
-}
-
-static void hpwdt_ping(void)
-{
- iowrite16(reload, hpwdt_timer_reg);
-}
-
-static int hpwdt_change_timer(int new_margin)
-{
- if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) {
- pr_warn("New value passed in is invalid: %d seconds\n",
- new_margin);
- return -EINVAL;
- }
-
- soft_margin = new_margin;
- pr_debug("New timer passed in is %d seconds\n", new_margin);
- reload = SECS_TO_TICKS(soft_margin);
-
- return 0;
-}
-
-static int hpwdt_time_left(void)
-{
- return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
-}
-
-#ifdef CONFIG_HPWDT_NMI_DECODING
-/*
- * NMI Handler
- */
-static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
-{
- unsigned long rom_pl;
- static int die_nmi_called;
-
- if (!hpwdt_nmi_decoding)
- goto out;
-
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called && !is_icru && !is_uefi)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
-
- if (allow_kdump)
- hpwdt_stop();
-
- if (!is_icru && !is_uefi) {
- if (cmn_regs.u1.ral == 0) {
- panic("An NMI occurred, "
- "but unable to determine source.\n");
- }
- }
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
-
-out:
- return NMI_DONE;
-}
-#endif /* CONFIG_HPWDT_NMI_DECODING */
-
-/*
- * /dev/watchdog handling
- */
-static int hpwdt_open(struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &hpwdt_is_open))
- return -EBUSY;
-
- /* Start the watchdog */
- hpwdt_start();
- hpwdt_ping();
-
- return nonseekable_open(inode, file);
-}
-
-static int hpwdt_release(struct inode *inode, struct file *file)
-{
- /* Stop the watchdog */
- if (expect_release == 42) {
- hpwdt_stop();
- } else {
- pr_crit("Unexpected close, not stopping watchdog!\n");
- hpwdt_ping();
- }
-
- expect_release = 0;
-
- /* /dev/watchdog is being closed, make sure it can be re-opened */
- clear_bit(0, &hpwdt_is_open);
-
- return 0;
-}
-
-static ssize_t hpwdt_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- /* See if we got the magic character 'V' and reload the timer */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* note: just in case someone wrote the magic character
- * five months ago... */
- expect_release = 0;
-
- /* scan to see whether or not we got the magic char. */
- for (i = 0; i != len; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- expect_release = 42;
- }
- }
-
- /* someone wrote to us, we should reload the timer */
- hpwdt_ping();
- }
-
- return len;
-}
-
-static const struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .identity = "HP iLO2+ HW Watchdog Timer",
-};
-
-static long hpwdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- int new_margin;
- int ret = -ENOTTY;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = 0;
- if (copy_to_user(argp, &ident, sizeof(ident)))
- ret = -EFAULT;
- break;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- ret = put_user(0, p);
- break;
-
- case WDIOC_KEEPALIVE:
- hpwdt_ping();
- ret = 0;
- break;
-
- case WDIOC_SETTIMEOUT:
- ret = get_user(new_margin, p);
- if (ret)
- break;
-
- ret = hpwdt_change_timer(new_margin);
- if (ret)
- break;
-
- hpwdt_ping();
- /* Fall */
- case WDIOC_GETTIMEOUT:
- ret = put_user(soft_margin, p);
- break;
-
- case WDIOC_GETTIMELEFT:
- ret = put_user(hpwdt_time_left(), p);
- break;
- }
- return ret;
-}
-
-/*
- * Kernel interfaces
- */
-static const struct file_operations hpwdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = hpwdt_write,
- .unlocked_ioctl = hpwdt_ioctl,
- .open = hpwdt_open,
- .release = hpwdt_release,
-};
-
-static struct miscdevice hpwdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &hpwdt_fops,
-};
-
-/*
- * Init & Exit
- */
-
-#ifdef CONFIG_HPWDT_NMI_DECODING
-#ifdef CONFIG_X86_LOCAL_APIC
-static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
-{
- /*
- * If nmi_watchdog is turned off then we can turn on
- * our nmi decoding capability.
- */
- hpwdt_nmi_decoding = 1;
-}
-#else
-static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
-{
- dev_warn(&dev->dev, "NMI decoding is disabled. "
- "Your kernel does not support a NMI Watchdog.\n");
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-/*
- * dmi_find_icru
- *
- * Routine Description:
- * This function checks whether or not we are on an iCRU-based server.
- * This check is independent of architecture and needs to be made for
- * any ProLiant system.
- */
-static void dmi_find_icru(const struct dmi_header *dm, void *dummy)
-{
- struct smbios_proliant_info *smbios_proliant_ptr;
-
- if (dm->type == SMBIOS_ICRU_INFORMATION) {
- smbios_proliant_ptr = (struct smbios_proliant_info *) dm;
- if (smbios_proliant_ptr->misc_features & 0x01)
- is_icru = 1;
- if (smbios_proliant_ptr->misc_features & 0x408)
- is_uefi = 1;
- }
-}
-
-static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
-{
- int retval;
-
- /*
- * On typical CRU-based systems we need to map that service in
- * the BIOS. For 32 bit Operating Systems we need to go through
- * the 32 Bit BIOS Service Directory. For 64 bit Operating
- * Systems we get that service through SMBIOS.
- *
- * On systems that support the new iCRU service all we need to
- * do is call dmi_walk to get the supported flag value and skip
- * the old cru detect code.
- */
- dmi_walk(dmi_find_icru, NULL);
- if (!is_icru && !is_uefi) {
-
- /*
- * We need to map the ROM to get the CRU service.
- * For 32 bit Operating Systems we need to go through the 32 Bit
- * BIOS Service Directory
- * For 64 bit Operating Systems we get that service through SMBIOS.
- */
- retval = detect_cru_service();
- if (retval < 0) {
- dev_warn(&dev->dev,
- "Unable to detect the %d Bit CRU Service.\n",
- HPWDT_ARCH);
- return retval;
- }
-
- /*
- * We know this is the only CRU call we need to make so lets keep as
- * few instructions as possible once the NMI comes in.
- */
- cmn_regs.u1.rah = 0x0D;
- cmn_regs.u1.ral = 0x02;
- }
-
- /*
- * Only one function can register for NMI_UNKNOWN
- */
- retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt");
- if (retval)
- goto error;
- retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt");
- if (retval)
- goto error1;
- retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt");
- if (retval)
- goto error2;
-
- dev_info(&dev->dev,
- "HP Watchdog Timer Driver: NMI decoding initialized"
- ", allow kernel dump: %s (default = 0/OFF)\n",
- (allow_kdump == 0) ? "OFF" : "ON");
- return 0;
-
-error2:
- unregister_nmi_handler(NMI_SERR, "hpwdt");
-error1:
- unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
-error:
- dev_warn(&dev->dev,
- "Unable to register a die notifier (err=%d).\n",
- retval);
- if (cru_rom_addr)
- iounmap(cru_rom_addr);
- return retval;
-}
-
-static void hpwdt_exit_nmi_decoding(void)
-{
- unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
- unregister_nmi_handler(NMI_SERR, "hpwdt");
- unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
- if (cru_rom_addr)
- iounmap(cru_rom_addr);
-}
-#else /* !CONFIG_HPWDT_NMI_DECODING */
-static void hpwdt_check_nmi_decoding(struct pci_dev *dev)
-{
-}
-
-static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
-{
- return 0;
-}
-
-static void hpwdt_exit_nmi_decoding(void)
-{
-}
-#endif /* CONFIG_HPWDT_NMI_DECODING */
-
-static int hpwdt_init_one(struct pci_dev *dev,
- const struct pci_device_id *ent)
-{
- int retval;
-
- /*
- * Check if we can do NMI decoding or not
- */
- hpwdt_check_nmi_decoding(dev);
-
- /*
- * First let's find out if we are on an iLO2+ server. We will
- * not run on a legacy ASM box.
- * So we only support the G5 ProLiant servers and higher.
- */
- if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
- dev_warn(&dev->dev,
- "This server does not have an iLO2+ ASIC.\n");
- return -ENODEV;
- }
-
- if (pci_enable_device(dev)) {
- dev_warn(&dev->dev,
- "Not possible to enable PCI Device: 0x%x:0x%x.\n",
- ent->vendor, ent->device);
- return -ENODEV;
- }
-
- pci_mem_addr = pci_iomap(dev, 1, 0x80);
- if (!pci_mem_addr) {
- dev_warn(&dev->dev,
- "Unable to detect the iLO2+ server memory.\n");
- retval = -ENOMEM;
- goto error_pci_iomap;
- }
- hpwdt_timer_reg = pci_mem_addr + 0x70;
- hpwdt_timer_con = pci_mem_addr + 0x72;
-
- /* Make sure that timer is disabled until /dev/watchdog is opened */
- hpwdt_stop();
-
- /* Make sure that we have a valid soft_margin */
- if (hpwdt_change_timer(soft_margin))
- hpwdt_change_timer(DEFAULT_MARGIN);
-
- /* Initialize NMI Decoding functionality */
- retval = hpwdt_init_nmi_decoding(dev);
- if (retval != 0)
- goto error_init_nmi_decoding;
-
- retval = misc_register(&hpwdt_miscdev);
- if (retval < 0) {
- dev_warn(&dev->dev,
- "Unable to register miscdev on minor=%d (err=%d).\n",
- WATCHDOG_MINOR, retval);
- goto error_misc_register;
- }
-
- dev_info(&dev->dev, "HP Watchdog Timer Driver: %s"
- ", timer margin: %d seconds (nowayout=%d).\n",
- HPWDT_VERSION, soft_margin, nowayout);
- return 0;
-
-error_misc_register:
- hpwdt_exit_nmi_decoding();
-error_init_nmi_decoding:
- pci_iounmap(dev, pci_mem_addr);
-error_pci_iomap:
- pci_disable_device(dev);
- return retval;
-}
-
-static void hpwdt_exit(struct pci_dev *dev)
-{
- if (!nowayout)
- hpwdt_stop();
-
- misc_deregister(&hpwdt_miscdev);
- hpwdt_exit_nmi_decoding();
- pci_iounmap(dev, pci_mem_addr);
- pci_disable_device(dev);
-}
-
-static struct pci_driver hpwdt_driver = {
- .name = "hpwdt",
- .id_table = hpwdt_devices,
- .probe = hpwdt_init_one,
- .remove = hpwdt_exit,
-};
-
-MODULE_AUTHOR("Tom Mingarelli");
-MODULE_DESCRIPTION("hp watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(HPWDT_VERSION);
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-
-module_param(soft_margin, int, 0);
-MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
-
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-#ifdef CONFIG_HPWDT_NMI_DECODING
-module_param(allow_kdump, int, 0);
-MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
-#endif /* !CONFIG_HPWDT_NMI_DECODING */
-
-module_pci_driver(hpwdt_driver);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
