Add MSI Wind U90/U100 to DMI table and add some missing EC features
support such as basic fan control, turbo and ECO modes and touchpad
state. Tested on MSI Wind U100.
Signed-off-by: Maxim Mikityanskiy <maxtram95@xxxxxxxxx>
---
Comparing to the previous series, I dropped 0xE4 and 0x64 scan codes
filtering. It was needed to filter out touchpad toggle key and send
only separate touchpad on/off keys. It was bad solution because 0xE4
and 0x64 are extended scan codes following after 0xE0. We can't filter
0xE0 when 0xE4/0x64 is arrived because we already passed 0xE0.
Filtering only 0xE4/0x64 resulted in having '0xE0, 0xE0' in stream and
it caused kernel warnings about unknown key.
The solution is to edit default udev keymap rules that remap 0xE4 scan
code to F21 key.
drivers/platform/x86/msi-laptop.c | 123 +++++++++++++++++++++++++++++++++++++-
1 file changed, 121 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 0bf94b5..28bcbb2 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -82,8 +82,19 @@
#define MSI_STANDARD_EC_SCM_LOAD_ADDRESS 0x2d
#define MSI_STANDARD_EC_SCM_LOAD_MASK (1 << 0)
-#define MSI_STANDARD_EC_TOUCHPAD_ADDRESS 0xe4
+#define MSI_STANDARD_EC_FUNCTIONS_ADDRESS 0xe4
+/* Power LED is orange - Turbo mode */
+#define MSI_STANDARD_EC_TURBO_MASK (1 << 1)
+/* Power LED is green - ECO mode */
+#define MSI_STANDARD_EC_ECO_MASK (1 << 3)
+/* Touchpad is turned on */
#define MSI_STANDARD_EC_TOUCHPAD_MASK (1 << 4)
+/* If this bit != bit 1, turbo mode can't be toggled */
+#define MSI_STANDARD_EC_TURBO_COOLDOWN_MASK (1 << 7)
+
+#define MSI_STANDARD_EC_FAN_ADDRESS 0x33
+/* If zero, fan rotates at maximal speed */
+#define MSI_STANDARD_EC_AUTOFAN_MASK (1 << 0)
#ifdef CONFIG_PM_SLEEP
static int msi_laptop_resume(struct device *device);
@@ -435,18 +446,115 @@ static ssize_t store_auto_brightness(struct device *dev,
return count;
}
+static ssize_t show_touchpad(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ u8 rdata;
+ int result;
+
+ result = ec_read(MSI_STANDARD_EC_FUNCTIONS_ADDRESS, &rdata);
+ if (result < 0)
+ return result;
+
+ return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TOUCHPAD_MASK));
+}
+
+static ssize_t show_turbo(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ u8 rdata;
+ int result;
+
+ result = ec_read(MSI_STANDARD_EC_FUNCTIONS_ADDRESS, &rdata);
+ if (result < 0)
+ return result;
+
+ return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_TURBO_MASK));
+}
+
+static ssize_t show_eco(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ u8 rdata;
+ int result;
+
+ result = ec_read(MSI_STANDARD_EC_FUNCTIONS_ADDRESS, &rdata);
+ if (result < 0)
+ return result;
+
+ return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_ECO_MASK));
+}
+
+static ssize_t show_turbo_cooldown(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ u8 rdata;
+ int result;
+
+ result = ec_read(MSI_STANDARD_EC_FUNCTIONS_ADDRESS, &rdata);
+ if (result < 0)
+ return result;
+
+ return sprintf(buf, "%i\n", (!!(rdata & MSI_STANDARD_EC_TURBO_MASK)) |
+ (!!(rdata & MSI_STANDARD_EC_TURBO_COOLDOWN_MASK) << 1));
+}
+
+static ssize_t show_auto_fan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+
+ u8 rdata;
+ int result;
+
+ result = ec_read(MSI_STANDARD_EC_FAN_ADDRESS, &rdata);
+ if (result < 0)
+ return result;
+
+ return sprintf(buf, "%i\n", !!(rdata & MSI_STANDARD_EC_AUTOFAN_MASK));
+}
+
+static ssize_t store_auto_fan(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+
+ int enable, result;
+
+ if (sscanf(buf, "%i", &enable) != 1 || (enable != (enable & 1)))
+ return -EINVAL;
+
+ result = ec_write(MSI_STANDARD_EC_FAN_ADDRESS, enable);
+ if (result < 0)
+ return result;
+
+ return count;
+}
+
static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
static DEVICE_ATTR(auto_brightness, 0644, show_auto_brightness,
store_auto_brightness);
static DEVICE_ATTR(bluetooth, 0444, show_bluetooth, NULL);
static DEVICE_ATTR(wlan, 0444, show_wlan, NULL);
static DEVICE_ATTR(threeg, 0444, show_threeg, NULL);
+static DEVICE_ATTR(touchpad, 0444, show_touchpad, NULL);
+static DEVICE_ATTR(turbo_mode, 0444, show_turbo, NULL);
+static DEVICE_ATTR(eco_mode, 0444, show_eco, NULL);
+static DEVICE_ATTR(turbo_cooldown, 0444, show_turbo_cooldown, NULL);
+static DEVICE_ATTR(auto_fan, 0644, show_auto_fan, store_auto_fan);
static struct attribute *msipf_attributes[] = {
&dev_attr_lcd_level.attr,
&dev_attr_auto_brightness.attr,
&dev_attr_bluetooth.attr,
&dev_attr_wlan.attr,
+ &dev_attr_touchpad.attr,
+ &dev_attr_turbo_mode.attr,
+ &dev_attr_eco_mode.attr,
+ &dev_attr_turbo_cooldown.attr,
+ &dev_attr_auto_fan.attr,
NULL
};
@@ -590,6 +698,16 @@ static struct dmi_system_id __initdata msi_dmi_table[] = {
.driver_data = &quirk_load_scm_model,
.callback = dmi_check_cb
},
+ {
+ .ident = "MSI U90/U100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U90/U100"),
+ },
+ .driver_data = &quirk_load_scm_ro_model,
+ .callback = dmi_check_cb
+ },
{ }
};
@@ -679,7 +797,7 @@ static void msi_send_touchpad_key(struct work_struct *ignored)
u8 rdata;
int result;
- result = ec_read(MSI_STANDARD_EC_TOUCHPAD_ADDRESS, &rdata);
+ result = ec_read(MSI_STANDARD_EC_FUNCTIONS_ADDRESS, &rdata);
if (result < 0)
return;
@@ -1069,3 +1187,4 @@ MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-N051:*");
MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnMS-N014:*");
MODULE_ALIAS("dmi:*:svnMicro-StarInternational*:pnCR620:*");
MODULE_ALIAS("dmi:*:svnMicro-StarInternational*:pnU270series:*");
+MODULE_ALIAS("dmi:*:svnMICRO-STARINTERNATIONAL*:pnU90/U100:*");
--
1.8.0.1
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
