Hi! When using nework interface (eth0), machine starts to behave weird. Like... complete freeze, then poweroff, then it hangs on boot (initializing ACPI) until I let it to cool down... and I'm not even using gigabit speed. Did anyone see it? Any ideas? Should I attempt to open it and clean the dust? Pavel e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: rootfid is (01234567.ffffffff.08051c00.00000000) coda: Unexpected interruption. Failure of coda_cnode_make for root: error -4 thinkpad_acpi: THERMAL EMERGENCY: a sensor reports something is extremely hot! thinkpad_acpi: temperatures (Celsius): 88 49 N/A 82 40 N/A 40 N/A 52 61 N/A N/A N/A N/A N/A N/A -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
