It seems that there was an error with the active_low = 1 for the LED, since it should be set to 0 (meaning that active is high, since 0 is false, hence the confusion. The wiki article about it confuses it, since it contradicts itself, regarding what turns on the LED. I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED behave correctly, where "none" turns it off, and "default-on" turns it on, when echoed onto the trigger "file" in /sys/class/leds. Signed-off-by: Bjarke Istrup Pedersen <gurligebis@xxxxxxxxxx> --- arch/x86/platform/geode/net5501.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c index 66d377e..646e3b5 100644 --- a/arch/x86/platform/geode/net5501.c +++ b/arch/x86/platform/geode/net5501.c @@ -63,7 +63,7 @@ static struct gpio_led net5501_leds[] = { .name = "net5501:1", .gpio = 6, .default_trigger = "default-on", - .active_low = 1, + .active_low = 0, }, }; -- 1.7.8.5 -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html