Hi AceLan,
I am tracing a issue related to hotkey define.
Could you please share dmidecode to me on your machine?
Thank's a lot!
Joey Lee
於 四，2011-08-11 於 15:45 +0800，AceLan Kao 提到：
> Dear Joey,
>
> Good, that looks more reasonable to me.
>
> Yes, my machine has wifi module on it, but the wifi hotkey event is
> handled by BIOS, so the wifi toggle works as expected.
> I still got the failed message, but we can take it as a BIOS bug and
> leave it there.
>
> BTW, your patches work well on my machine, thanks for your hard work.
> You can have my signature on your patches.
> Tested-by: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
>
> Best regards,
> AceLan Kao.
>
> 2011/8/11 Joey Lee <jlee@xxxxxxxxxx>:
> > 於 四，2011-08-11 於 03:30 +0000，joeyli(Joey Lee) 提到：
> >> 於 四，2011-08-11 於 10:48 +0800，AceLan Kao 提到：
> >> > Dear Joey,
> >> >
> >> > This is the dmesg log.
> >> > [ 9010.944053] acer_wmi: Acer Laptop ACPI-WMI Extras
> >> > [ 9010.944071] acer_wmi: Function bitmap for Communication Button: 0x1
> >
> > Per this log, the 0x1 means your machine have wifi hardware module and
> > BIOS detected it then write information to SMBIOS area.
> >
> >> > [ 9010.944075] acer_wmi: Brightness must be controlled by generic video driver
> >> > [ 9010.944996] input: Acer WMI hotkeys as /devices/virtual/input/input21
> >> > [ 9010.947095] acer_wmi: Set Device Status failed: 0xe2 - 0x0
> >> >
> >
> > But,
> > here have problem when acer-wmi driver try to set the state by
> > WMID_GUID3 method, the wmi function response 0xe2.
> >
> >> > And after adding my quirk, the set device status still failed, but
> >> > except that, everything works well.
> >> >
> >>
> >> So, you machine have wifi hardware module or not?
> >>
> >> > The "failed" comes from acer_rfkill_init(), it'll call
> >> > acer_rfkill_register() with ACER_CAP_WIRELESS parameter without
> >> > checking the capability.
> >> > I don't know why only wifi doesn't check the capability and call
> >> > acer_rfkill_register() directly, but it doesn't hurt the system.
> >> >
> >> > ===
> >> > static int acer_rfkill_init(struct device *dev)
> >> > {
> >> > wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
> >> > "acer-wireless", ACER_CAP_WIRELESS);
> >> > if (IS_ERR(wireless_rfkill))
> >> > return PTR_ERR(wireless_rfkill);
> >> > ===
> >> >
> >> > Best regards,
> >> > AceLan Kao.
> >> >
> >>
> >> I checked the history, looks like it's just a original design in old
> >> patch.
> >>
> >> Yes, you are right, add ACER_CAP_WIRELESS check is better. I am doing
> >> generate a patch to add ACER_CAP_WIRELESS check.
> >> Will attached patch on mail.
> >>
> >>
> >> Thank's
> >> Joey Lee
> >>
> >
> > Please let me know does there have any wifi module in your machine when
> > you test?
> > If yes, then you need contact with BIOS team for why the WMID_GUID3
> > method response 0xe2 when set device state, because this function works
> > find on my TravelMate 8572 machine.
> >
> > On the other hand,
> > The following is patch to check the ACER_CAP_WIRELESS before generate
> > wireless rfkill.
> >
> >
> > Thank's
> > Joey Lee
> >
> > >From 18c20f2b40bc64ec72b52ae2e4d994237173f982 Mon Sep 17 00:00:00 2001
> > From: Lee, Chun-Yi <jlee@xxxxxxxx>
> > Date: Thu, 11 Aug 2011 12:49:53 +0800
> > Subject: [PATCH] acer-wmi: check wireless capability flag before register rfkill
> >
> > There will be better to check the wireless capability flag
> > (ACER_CAP_WIRELESS) before register wireless rfkill because maybe
> > the machine doesn't have wifi module or the module removed by user.
> >
> > Signed-off-by: Lee, Chun-Yi <jlee@xxxxxxxx>
> > ---
> > drivers/platform/x86/acer-wmi.c | 64 +++++++++++++++++++++++++-------------
> > 1 files changed, 42 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
> > index 712a505..b4078c4 100644
> > --- a/drivers/platform/x86/acer-wmi.c
> > +++ b/drivers/platform/x86/acer-wmi.c
> > @@ -1289,12 +1289,13 @@ static void acer_rfkill_update(struct work_struct *ignored)
> > u32 state;
> > acpi_status status;
> >
> > - status = get_u32(&state, ACER_CAP_WIRELESS);
> > - if (ACPI_SUCCESS(status)) {
> > - if (quirks->wireless == 3) {
> > - rfkill_set_hw_state(wireless_rfkill, !state);
> > - } else {
> > - rfkill_set_sw_state(wireless_rfkill, !state);
> > + if (has_cap(ACER_CAP_WIRELESS)) {
> > + status = get_u32(&state, ACER_CAP_WIRELESS);
> > + if (ACPI_SUCCESS(status)) {
> > + if (quirks->wireless == 3)
> > + rfkill_set_hw_state(wireless_rfkill, !state);
> > + else
> > + rfkill_set_sw_state(wireless_rfkill, !state);
> > }
> > }
> >
> > @@ -1362,19 +1363,24 @@ static struct rfkill *acer_rfkill_register(struct device *dev,
> >
> > static int acer_rfkill_init(struct device *dev)
> > {
> > - wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
> > - "acer-wireless", ACER_CAP_WIRELESS);
> > - if (IS_ERR(wireless_rfkill))
> > - return PTR_ERR(wireless_rfkill);
> > + int err;
> > +
> > + if (has_cap(ACER_CAP_WIRELESS)) {
> > + wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
> > + "acer-wireless", ACER_CAP_WIRELESS);
> > + if (IS_ERR(wireless_rfkill)) {
> > + err = PTR_ERR(wireless_rfkill);
> > + goto error_wireless;
> > + }
> > + }
> >
> > if (has_cap(ACER_CAP_BLUETOOTH)) {
> > bluetooth_rfkill = acer_rfkill_register(dev,
> > RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
> > ACER_CAP_BLUETOOTH);
> > if (IS_ERR(bluetooth_rfkill)) {
> > - rfkill_unregister(wireless_rfkill);
> > - rfkill_destroy(wireless_rfkill);
> > - return PTR_ERR(bluetooth_rfkill);
> > + err = PTR_ERR(bluetooth_rfkill);
> > + goto error_bluetooth;
> > }
> > }
> >
> > @@ -1383,30 +1389,44 @@ static int acer_rfkill_init(struct device *dev)
> > RFKILL_TYPE_WWAN, "acer-threeg",
> > ACER_CAP_THREEG);
> > if (IS_ERR(threeg_rfkill)) {
> > - rfkill_unregister(wireless_rfkill);
> > - rfkill_destroy(wireless_rfkill);
> > - rfkill_unregister(bluetooth_rfkill);
> > - rfkill_destroy(bluetooth_rfkill);
> > - return PTR_ERR(threeg_rfkill);
> > + err = PTR_ERR(threeg_rfkill);
> > + goto error_threeg;
> > }
> > }
> >
> > rfkill_inited = true;
> >
> > - if (ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID))
> > + if ((ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID)) &&
> > + has_cap(ACER_CAP_WIRELESS | ACER_CAP_BLUETOOTH | ACER_CAP_THREEG))
> > schedule_delayed_work(&acer_rfkill_work,
> > round_jiffies_relative(HZ));
> >
> > return 0;
> > +
> > +error_threeg:
> > + if (has_cap(ACER_CAP_BLUETOOTH)) {
> > + rfkill_unregister(bluetooth_rfkill);
> > + rfkill_destroy(bluetooth_rfkill);
> > + }
> > +error_bluetooth:
> > + if (has_cap(ACER_CAP_WIRELESS)) {
> > + rfkill_unregister(wireless_rfkill);
> > + rfkill_destroy(wireless_rfkill);
> > + }
> > +error_wireless:
> > + return err;
> > }
> >
> > static void acer_rfkill_exit(void)
> > {
> > - if (ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID))
> > + if ((ec_raw_mode || !wmi_has_guid(ACERWMID_EVENT_GUID)) &&
> > + has_cap(ACER_CAP_WIRELESS | ACER_CAP_BLUETOOTH | ACER_CAP_THREEG))
> > cancel_delayed_work_sync(&acer_rfkill_work);
> >
> > - rfkill_unregister(wireless_rfkill);
> > - rfkill_destroy(wireless_rfkill);
> > + if (has_cap(ACER_CAP_WIRELESS)) {
> > + rfkill_unregister(wireless_rfkill);
> > + rfkill_destroy(wireless_rfkill);
> > + }
> >
> > if (has_cap(ACER_CAP_BLUETOOTH)) {
> > rfkill_unregister(bluetooth_rfkill);
> > --
> > 1.6.0.2
> >
> >
> >
> >
>
>
>
> --
> Chia-Lin Kao(AceLan)
> http://blog.acelan.idv.tw/
> E-Mail: acelan.kaoATcanonical.com (s/AT/@/)
> --
> To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
