On 01/30/2011 06:46 AM, Ozan ÃaÄlayan wrote: > Hi, > > How to fix or debug the $subject? You always have to press Fn+F2 to hard > unblock the rfkill after every boot on a local brand laptop. > > If the rfkill switch is really a switch which can be toggled on/off, > this makes sense. If you keep it Off, it will come as blocked. But it > seems that on this machine Fn+F2 controls the hard block state. > > It should either be saved in somewhere (I've read that there is a > persistent knob for rfkill drivers in sysfs which tells whether the > state is kept in a non-volatile space across boots or not) or all soft > and this kind of Fn+Fx hard blocks should be explicitly disabled by > kernel during boots. > > I don't have direct access to the machine but the owner will help if you > need any output, etc. > > After booting: > > 0: hci0: Bluetooth > Soft blocked: no > Hard blocked: no > 1: phy0: Wireless LAN > Soft blocked: no > Hard blocked: yes > > After pressing Fn+F2: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > 1: hci0: Bluetooth > Soft blocked: no > Hard blocked: no > > 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless > Network Adapter (PCI-Express) (rev 01) > Subsystem: Device 1a3b:1089 > Flags: bus master, fast devsel, latency 0, IRQ 17 > Memory at f1d00000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 3 > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- > Capabilities: [60] Express Legacy Endpoint, MSI 00 > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Virtual Channel > Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12 > Capabilities: [170] Power Budgeting <?> > Kernel driver in use: ath9k > Kernel modules: ath9k > > This is on 2.6.37. I'm waiting for the dmesg output. The nature of that Fn-F2 key depends on how the motherboard manufacturer coded their BIOS. Most do it as a toggle and use some WMI (Windows Management Interface) code to initialize it on boot up. As this no-name laptop is unlikely to have a WMI driver the way that name brands do, it probably generates a keystroke. That is easy to check - Use CTRL-ALT-F1 to switch to a console, log in, and issue the command "showkey". Is a keycode returned when Fn-F2 is pressed? If the button does generate a key event, then adding a command to generate this key in a script that is executed after bootup should solve the problem. I don't know the command you need, but I'm sure someone will. Where to put that command will depend on your distro. Larry -- To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
