From: Sreedhara DS <sreedhara.ds@xxxxxxxxx>
This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.
Signed-off-by: Sreedhara DS <sreedhara.ds@xxxxxxxxx>
[Extensive clean up and debug]
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/platform/x86/Kconfig | 9 ++
drivers/platform/x86/Makefile | 1
drivers/platform/x86/intel_scu_ipc.c | 4 -
drivers/platform/x86/intel_scu_ipcutil.c | 133 ++++++++++++++++++++++++++++++
4 files changed, 145 insertions(+), 2 deletions(-)
create mode 100644 drivers/platform/x86/intel_scu_ipcutil.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d2d1510..8bc44c3 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -576,6 +576,15 @@ config INTEL_SCU_IPC
some embedded Intel x86 platforms. This is not needed for PC-type
machines.
+config INTEL_SCU_IPC_UTIL
+ tristate "Intel SCU IPC utility driver"
+ depends on INTEL_SCU_IPC
+ default y
+ ---help---
+ The IPC Util driver provides an interface with the SCU enabling
+ low level access for debug work and updating the firmware. Say
+ N unless you will be doing this on an Intel MID platform.
+
config GPIO_INTEL_PMIC
bool "Intel PMIC GPIO support"
depends on INTEL_SCU_IPC && GPIOLIB
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index c97ac2a..deefa4f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC_UTIL)+= intel_scu_ipcutil.o
obj-$(CONFIG_RAR_REGISTER) += intel_rar_register.o
obj-$(CONFIG_INTEL_IPS) += intel_ips.o
obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 41a9e34..37128c6 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -496,7 +496,7 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
"intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
mutex_unlock(&ipclock);
- return -1;
+ return -EIO;
}
mutex_unlock(&ipclock);
return 0;
@@ -641,7 +641,7 @@ update_end:
if (status == IPC_FW_UPDATE_SUCCESS)
return 0;
- return -1;
+ return -EIO;
}
EXPORT_SYMBOL(intel_scu_ipc_fw_update);
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
new file mode 100644
index 0000000..ba3231d
--- /dev/null
+++ b/drivers/platform/x86/intel_scu_ipcutil.c
@@ -0,0 +1,133 @@
+/*
+ * intel_scu_ipc.c: Driver for the Intel SCU IPC mechanism
+ *
+ * (C) Copyright 2008-2010 Intel Corporation
+ * Author: Sreedhara DS (sreedhara.ds@xxxxxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * This driver provides ioctl interfaces to call intel scu ipc driver api
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/intel_scu_ipc.h>
+
+static u32 major;
+
+#define MAX_FW_SIZE 264192
+
+/* ioctl commnds */
+#define INTE_SCU_IPC_REGISTER_READ 0
+#define INTE_SCU_IPC_REGISTER_WRITE 1
+#define INTE_SCU_IPC_REGISTER_UPDATE 2
+#define INTE_SCU_IPC_FW_UPDATE 0xA2
+
+struct scu_ipc_data {
+ u32 count; /* No. of registers */
+ u16 addr[5]; /* Register addresses */
+ u8 data[5]; /* Register data */
+ u8 mask; /* Valid for read-modify-write */
+};
+
+/**
+ * scu_reg_access - implement register access ioctls
+ * @cmd: command we are doing (read/write/update)
+ * @data: kernel copy of ioctl data
+ *
+ * Allow the user to perform register accesses on the SCU via the
+ * kernel interface
+ */
+
+static int scu_reg_access(u32 cmd, struct scu_ipc_data *data)
+{
+ int count = data->count;
+
+ if (count == 0 || count == 3 || count > 4)
+ return -EINVAL;
+
+ switch (cmd) {
+ case INTE_SCU_IPC_REGISTER_READ:
+ return intel_scu_ipc_readv(data->addr, data->data, count);
+ case INTE_SCU_IPC_REGISTER_WRITE:
+ return intel_scu_ipc_writev(data->addr, data->data, count);
+ case INTE_SCU_IPC_REGISTER_UPDATE:
+ return intel_scu_ipc_update_register(data->addr[0],
+ data->data[0], data->mask);
+ default:
+ return -ENOTTY;
+ }
+}
+
+/**
+ * scu_ipc_ioctl - control ioctls for the SCU
+ * @fp: file handle of the SCU device
+ * @cmd: ioctl coce
+ * @arg: pointer to user passed structure
+ *
+ * Support the I/O and firmware flashing interfaces of the SCU
+ */
+static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret;
+ struct scu_ipc_data data;
+ void __user *argp = (void __user *)arg;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ if (cmd == INTE_SCU_IPC_FW_UPDATE) {
+ u8 *fwbuf = kmalloc(MAX_FW_SIZE, GFP_KERNEL);
+ if (fwbuf == NULL)
+ return -ENOMEM;
+ if (copy_from_user(fwbuf, (u8 *)arg, MAX_FW_SIZE)) {
+ kfree(fwbuf);
+ return -EFAULT;
+ }
+ ret = intel_scu_ipc_fw_update(fwbuf, MAX_FW_SIZE);
+ kfree(fwbuf);
+ return ret;
+ } else {
+ if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data)))
+ return -EFAULT;
+ ret = scu_reg_access(cmd, &data);
+ if (ret < 0)
+ return ret;
+ if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data)))
+ return -EFAULT;
+ return 0;
+ }
+}
+
+static const struct file_operations scu_ipc_fops = {
+ .unlocked_ioctl = scu_ipc_ioctl,
+};
+
+static int __init ipc_module_init(void)
+{
+ return register_chrdev(0, "intel_mid_scu", &scu_ipc_fops);
+}
+
+static void __exit ipc_module_exit(void)
+{
+ unregister_chrdev(major, "intel_mid_scu");
+}
+
+module_init(ipc_module_init);
+module_exit(ipc_module_exit);
+
+MODULE_LICENSE("GPL V2");
+MODULE_DESCRIPTION("Utility driver for intel scu ipc");
+MODULE_AUTHOR("Sreedhara <sreedhara.ds@xxxxxxxxx>");
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
