We are having a problem
with the max_calls settings on PJSIP and Asterisk. We are
stress-testing our Asterisk server, but found that we had a max 32
active call limitation on our PJSIP module. We are using PJSIP to
test our Asterisk server
After a quick google we
found the following settings would fix the problem.
Following steps can be taken to increase number of calls supported on PJSIP:
Example: If you have to increase simultaneous calls to 1000 change the following:
1. Change PJSUA_MAX_CALLS to 1000 and PJSUA_MAX_ACC to 1000
2. Change PJ_IOQUEUE_MAX_HANDLES to 2000 (double of desired number of calls).
3. Change __FD_SETSIZE to double to 2000 (double of desired number of calls).
4. Change PJSUA_MAX_PLAYERS to 1000.
5. Recompile pjsip using following steps:
a. ./configure --disable-ssl --disable-sound;
b. make dep
c. make
d. make install
6. Recompile your application with new libs.
Somehow This is not
working for us; What are we doing wrong here? Anybody suggestions.
Help would be higly appreciated.
Our code in the
config_site.php file
/*
* This file contains several sample settings especially for Windows
* Mobile and Symbian targets. You can include this file in your
* <pj/config_site.h> file.
*
* The Windows Mobile and Symbian settings will be activated
* automatically if you include this file.
*
* In addition, you may specify one of these macros (before including
* this file) to activate additional settings:
*
* #define PJ_CONFIG_NOKIA_APS_DIRECT
* Use this macro to activate the APS-Direct feature. Please see
* http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct for more
* info.
*
* #define PJ_CONFIG_WIN32_WMME_DIRECT
* Configuration to activate "APS-Direct" media mode on Windows or
* Windows Mobile, useful for testing purposes only.
*/
/*
* Typical configuration for WinCE target.
*/
#if defined(PJ_WIN32_WINCE) && PJ_WIN32_WINCE!=0
/*
* PJLIB settings.
*/
/* Disable floating point support */
#define PJ_HAS_FLOATING_POINT 0
/*
* PJMEDIA settings
*/
/* Select codecs to disable */
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_ILBC_CODEC 0
/* We probably need more buffers on WM, so increase the limit */
#define PJMEDIA_SOUND_BUFFER_COUNT 32
/* Fine tune Speex's default settings for best performance/quality */
#define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
/* For CPU reason, disable speex AEC and use the echo suppressor. */
#define PJMEDIA_HAS_SPEEX_AEC 0
/* Previously, resampling is disabled due to performance reason and
* this condition prevented some 'light' wideband codecs (e.g: G722.1)
* to work along with narrowband codecs. Lately, some tests showed
* that 16kHz <-> 8kHz resampling using libresample small filter was
* affordable on ARM9 260 MHz, so here we decided to enable resampling.
* Note that it is important to make sure that libresample is created
* using small filter. For example PJSUA_DEFAULT_CODEC_QUALITY must
* be set to 3 or 4 so pjsua-lib will apply small filter resampling.
*/
//#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_NONE
#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_LIBRESAMPLE
/* Use the lighter WSOLA implementation */
#define PJMEDIA_WSOLA_IMP PJMEDIA_WSOLA_IMP_WSOLA_LITE
/*
* PJSIP settings.
*/
/* Set maximum number of dialog/transaction/calls to minimum to reduce
* memory usage
*/
#define PJSIP_MAX_TSX_COUNT 31
#define PJSIP_MAX_DIALOG_COUNT 31
#define PJSUA_MAX_CALLS 64
/*
* PJSUA settings
*/
/* Default codec quality, previously was set to 5, however it is now
* set to 4 to make sure pjsua instantiates resampler with small filter.
*/
#define PJSUA_DEFAULT_CODEC_QUALITY 4
/* Set maximum number of objects to minimum to reduce memory usage */
#define PJSUA_MAX_ACC 64
#define PJSUA_MAX_PLAYERS 64
#define PJSUA_MAX_RECORDERS 4
#define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
#define PJSUA_MAX_BUDDIES 32
#endif /* PJ_WIN32_WINCE */
/*
* Typical configuration for Symbian OS target
*/
#if defined(PJ_SYMBIAN) && PJ_SYMBIAN!=0
/*
* PJLIB settings.
*/
/* Disable floating point support */
#define PJ_HAS_FLOATING_POINT 0
/* Misc PJLIB setting */
#define PJ_MAXPATH 80
/* This is important for Symbian. Symbian lacks vsnprintf(), so
* if the log buffer is not long enough it's possible that
* large incoming packet will corrupt memory when the log tries
* to log the packet.
*/
#define PJ_LOG_MAX_SIZE (PJSIP_MAX_PKT_LEN+500)
/* Since we don't have threads, log buffer can use static buffer
* rather than stack
*/
#define PJ_LOG_USE_STACK_BUFFER 0
/* Disable check stack since it increases footprint */
#define PJ_OS_HAS_CHECK_STACK 0
/*
* PJMEDIA settings
*/
/* Disable non-Symbian audio devices */
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_WMME 0
/* Select codecs to disable */
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_ILBC_CODEC 0
#define PJMEDIA_HAS_G722_CODEC 0
/* Fine tune Speex's default settings for best performance/quality */
#define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
/* For CPU reason, disable speex AEC and use the echo suppressor. */
#define PJMEDIA_HAS_SPEEX_AEC 0
/* Previously, resampling is disabled due to performance reason and
* this condition prevented some 'light' wideband codecs (e.g: G722.1)
* to work along with narrowband codecs. Lately, some tests showed
* that 16kHz <-> 8kHz resampling using libresample small filter was
* affordable on ARM9 222 MHz, so here we decided to enable resampling.
* Note that it is important to make sure that libresample is created
* using small filter. For example PJSUA_DEFAULT_CODEC_QUALITY must
* be set to 3 or 4 so pjsua-lib will apply small filter resampling.
*/
//#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_NONE
#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_LIBRESAMPLE
/* Use the lighter WSOLA implementation */
#define PJMEDIA_WSOLA_IMP PJMEDIA_WSOLA_IMP_WSOLA_LITE
/* We probably need more buffers especially if MDA audio backend
* is used, so increase the limit
*/
#define PJMEDIA_SOUND_BUFFER_COUNT 32
/*
* PJSIP settings.
*/
/* Disable safe module access, since we don't use multithreading */
#define PJSIP_SAFE_MODULE 0
/* Use large enough packet size */
#define PJSIP_MAX_PKT_LEN 2000
/* Symbian has problem with too many large blocks */
#define PJSIP_POOL_LEN_ENDPT 1000
#define PJSIP_POOL_INC_ENDPT 1000
#define PJSIP_POOL_RDATA_LEN 2000
#define PJSIP_POOL_RDATA_INC 2000
#define PJSIP_POOL_LEN_TDATA 2000
#define PJSIP_POOL_INC_TDATA 512
#define PJSIP_POOL_LEN_UA 2000
#define PJSIP_POOL_INC_UA 1000
#define PJSIP_POOL_TSX_LAYER_LEN 256
#define PJSIP_POOL_TSX_LAYER_INC 256
#define PJSIP_POOL_TSX_LEN 512
#define PJSIP_POOL_TSX_INC 128
/*
* PJSUA settings.
*/
/* Default codec quality, previously was set to 5, however it is now
* set to 4 to make sure pjsua instantiates resampler with small filter.
*/
#define PJSUA_DEFAULT_CODEC_QUALITY 4
/* Set maximum number of dialog/transaction/calls to minimum */
#define PJSIP_MAX_TSX_COUNT 31
#define PJSIP_MAX_DIALOG_COUNT 31
#define PJSUA_MAX_CALLS 64
/* Other pjsua settings */
#define PJSUA_MAX_ACC 64
#define PJSUA_MAX_PLAYERS 64
#define PJSUA_MAX_RECORDERS 4
#define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
#define PJSUA_MAX_BUDDIES 32
#endif
/*
* Additional configuration to activate APS-Direct feature for
* Nokia S60 target
*
* Please see http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct
*/
#ifdef PJ_CONFIG_NOKIA_APS_DIRECT
/* MUST use switchboard rather than the conference bridge */
#define PJMEDIA_CONF_USE_SWITCH_BOARD 1
/* Enable APS sound device backend and disable MDA & VAS */
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_MDA 0
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_APS 1
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_VAS 0
/* Enable passthrough codec framework */
#define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
/* And selectively enable which codecs are supported by the handset */
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 1
#endif
/*
* Additional configuration to activate VAS-Direct feature for
* Nokia S60 target
*
* Please see http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct
*/
#ifdef PJ_CONFIG_NOKIA_VAS_DIRECT
/* MUST use switchboard rather than the conference bridge */
#define PJMEDIA_CONF_USE_SWITCH_BOARD 1
/* Enable VAS sound device backend and disable MDA & APS */
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_MDA 0
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_APS 0
#define PJMEDIA_AUDIO_DEV_HAS_SYMB_VAS 1
/* Enable passthrough codec framework */
#define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
/* And selectively enable which codecs are supported by the handset */
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 1
#endif
/*
* Configuration to activate "APS-Direct" media mode on Windows,
* useful for testing purposes only.
*/
#ifdef PJ_CONFIG_WIN32_WMME_DIRECT
/* MUST use switchboard rather than the conference bridge */
#define PJMEDIA_CONF_USE_SWITCH_BOARD 1
/* Only WMME supports the "direct" feature */
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_WMME 1
/* Enable passthrough codec framework */
#define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
/* Only PCMA and PCMU are supported by WMME-direct */
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 0
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 0
#define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 0
#endif
/*
* iPhone sample settings.
*/
#if PJ_CONFIG_IPHONE
/*
* PJLIB settings.
*/
/* Both armv6 and armv7 has FP hardware support.
* See https://trac.pjsip.org/repos/ticket/1589 for more info
*/
#define PJ_HAS_FLOATING_POINT 1
/*
* PJMEDIA settings
*/
/* We have our own native CoreAudio backend */
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_WMME 0
#define PJMEDIA_AUDIO_DEV_HAS_COREAUDIO 1
/* The CoreAudio backend has built-in echo canceller! */
#define PJMEDIA_HAS_SPEEX_AEC 0
/* Disable some codecs */
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_G722_CODEC 0
/* Use the built-in CoreAudio's iLBC codec (yay!) */
#define PJMEDIA_HAS_ILBC_CODEC 1
#define PJMEDIA_ILBC_CODEC_USE_COREAUDIO 1
/* Fine tune Speex's default settings for best performance/quality */
#define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
/*
* PJSIP settings.
*/
/* Increase allowable packet size, just in case */
//#define PJSIP_MAX_PKT_LEN 2000
/*
* PJSUA settings.
*/
/* Default codec quality, previously was set to 5, however it is now
* set to 4 to make sure pjsua instantiates resampler with small filter.
*/
#define PJSUA_DEFAULT_CODEC_QUALITY 4
/* Set maximum number of dialog/transaction/calls to minimum */
#define PJSIP_MAX_TSX_COUNT 31
#define PJSIP_MAX_DIALOG_COUNT 31
#define PJSUA_MAX_CALLS 64
/* Other pjsua settings */
#define PJSUA_MAX_ACC 64
#define PJSUA_MAX_PLAYERS 64
#define PJSUA_MAX_RECORDERS 4
#define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
#define PJSUA_MAX_BUDDIES 32
#endif
/*
* Android sample settings.
*/
#if PJ_CONFIG_ANDROID
#define PJ_ANDROID 1
/*
* PJLIB settings.
*/
/* Disable floating point support */
#undef PJ_HAS_FLOATING_POINT
#define PJ_HAS_FLOATING_POINT 0
/*
* PJMEDIA settings
*/
/* We have our own OpenSL ES backend */
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#define PJMEDIA_AUDIO_DEV_HAS_WMME 0
#define PJMEDIA_AUDIO_DEV_HAS_OPENSL 0
#define PJMEDIA_AUDIO_DEV_HAS_ANDROID_JNI 1
/* Disable some codecs */
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_G722_CODEC 0
/* Fine tune Speex's default settings for best performance/quality */
#define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
/*
* PJSIP settings.
*/
/* Increase allowable packet size, just in case */
//#define PJSIP_MAX_PKT_LEN 2000
/*
* PJSUA settings.
*/
/* Default codec quality, previously was set to 5, however it is now
* set to 4 to make sure pjsua instantiates resampler with small filter.
*/
#define PJSUA_DEFAULT_CODEC_QUALITY 4
/* Set maximum number of dialog/transaction/calls to minimum */
#define PJSIP_MAX_TSX_COUNT 31
#define PJSIP_MAX_DIALOG_COUNT 31
#define PJSUA_MAX_CALLS 64
/* Other pjsua settings */
#define PJSUA_MAX_ACC 64
#define PJSUA_MAX_PLAYERS 64
#define PJSUA_MAX_RECORDERS 4
#define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
#define PJSUA_MAX_BUDDIES 32
#endif
/*
* BB10
*/
#if defined(PJ_CONFIG_BB10) && PJ_CONFIG_BB10
/* Quality 3 - 4 to use resampling small filter */
#define PJSUA_DEFAULT_CODEC_QUALITY 4
#define PJMEDIA_HAS_LEGACY_SOUND_API 0
#undef PJMEDIA_HAS_SPEEX_AEC
#define PJMEDIA_HAS_SPEEX_AEC 0
#undef PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO
#define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
#endif
/*
* Minimum size
*/
#ifdef PJ_CONFIG_MINIMAL_SIZE
# undef PJ_OS_HAS_CHECK_STACK
# define PJ_OS_HAS_CHECK_STACK 0
# define PJ_LOG_MAX_LEVEL 0
# define PJ_ENABLE_EXTRA_CHECK 0
# define PJ_HAS_ERROR_STRING 0
# undef PJ_IOQUEUE_MAX_HANDLES
/* Putting max handles to lower than 32 will make pj_fd_set_t size smaller
* than native fdset_t and will trigger assertion on sock_select.c.
*/
# define PJ_IOQUEUE_MAX_HANDLES 128
# define PJ_CRC32_HAS_TABLES 0
# define PJSIP_MAX_TSX_COUNT 15
# define PJSIP_MAX_DIALOG_COUNT 15
# define PJSIP_UDP_SO_SNDBUF_SIZE 4000
# define PJSIP_UDP_SO_RCVBUF_SIZE 4000
# define PJMEDIA_HAS_ALAW_ULAW_TABLE 0
#elif defined(PJ_CONFIG_MAXIMUM_SPEED)
# define PJ_SCANNER_USE_BITWISE 0
# undef PJ_OS_HAS_CHECK_STACK
# define PJ_OS_HAS_CHECK_STACK 0
# define PJ_LOG_MAX_LEVEL 3
# define PJ_ENABLE_EXTRA_CHECK 0
# define PJ_IOQUEUE_MAX_HANDLES 5000
# define PJSIP_MAX_TSX_COUNT ((640*1024)-1)
# define PJSIP_MAX_DIALOG_COUNT ((640*1024)-1)
# define PJSIP_UDP_SO_SNDBUF_SIZE (24*1024*1024)
# define PJSIP_UDP_SO_RCVBUF_SIZE (24*1024*1024)
# define PJ_DEBUG 0
# define PJSIP_SAFE_MODULE 0
# define PJ_HAS_STRICMP_ALNUM 0
# define PJ_HASH_USE_OWN_TOLOWER 1
# define PJSIP_UNESCAPE_IN_PLACE 1
# if defined(PJ_WIN32) || defined(PJ_WIN64)
# define PJSIP_MAX_NET_EVENTS 10
# endif
# define PJSUA_MAX_CALLS 512
#endif
We have also set the
__FD_SETSIZE
We are quite lost as
this moment, what are we doing wrong here.
Help would be highly
appreciated.
