I'm on the actual device. There's no audio input on it either. Now that I sample apps are built, I tried : root at alarmpi ...pjproject-2.0.1/pjsip-apps/bin/samples/armv6l-unknown-linux-gnu# ./playfile /usr/share/sounds/alsa/Front_Center.wav 22:08:34.749 os_core_unix.c !pjlib 2.0.1 for POSIX initialized 22:08:35.013 pa_dev.c PortAudio sound library initialized, status=0 22:08:35.017 pa_dev.c PortAudio host api count=2 22:08:35.020 pa_dev.c Sound device count=3 22:08:35.025 pjlib select() I/O Queue created (0x1e1074) 22:08:35.034 wav_player.c File player '/usr/share/sounds/alsa/Front_Center.wav' created: samp.rate=48000, ch=1, bufsize=4KB, filesize=137KB 22:08:35.037 playfile.c Unable to open sound device: Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) [code=420006] I can play sound with aplay and with auddemo. auddemo says: Found 3 devices: 0: PA [bcm2835 ALSA: bcm2835 ALSA (hw:0,0)] (0/2) 1: PA [sysdefault] (0/128) 2: PA [default] (0/128) I tried setting --capture-dev and --playback-dev to 0 for pjsua --Travis Here's more info: root at alarmpi /opt/vc # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 root at alarmpi ...s/bin/samples/armv6l-unknown-linux-gnu # lsmod Module Size Used by ipv6 289527 10 binfmt_misc 6800 1 spidev 5028 0 i2c_bcm2708 3366 0 spi_bcm2708 4357 0 snd_bcm2835 19433 0 snd_pcm 74862 1 snd_bcm2835 snd_page_alloc 4871 1 snd_pcm snd_timer 19614 1 snd_pcm snd 52057 3 snd_timer,snd_pcm,snd_bcm2835 On Fri, Sep 21, 2012 at 1:09 PM, Kaan Ersan <kersan at briskmobile.com> wrote: > Hi, > Are you running on an actual device or simulator? > On the simulator, there is no microphone so it doesn't work for me. > > Kaan Ersan | Brisk Mobile Inc. | Software Developer > kersan at briskmobile.com > > On 2012-09-21, at 3:59 PM, Travis LaDuke wrote: > > Did you have luck? I'm trying to do the same thing. I'm getting: > pjsua_aud.c !..Error retrieving default audio device parameters: > Unable to find default audio device (PJMEDIA_EAUD_NODEFDEV) > [status=420006] > > I was thinking I need to recompile again, but now I think maybe it's > just because there's no input device. > > --Travis > > On Wed, Sep 5, 2012 at 1:38 AM, Ross McKillop <ross at rsmck.co.uk> wrote: > > Sorry looking at the thread title it's a bit misleading. I'm looking to > have pjsua answer the call and play the inbound audio only over ALSA. > > > Maybe ' play inbound audio only ( no microphone ) ' would have been a better > subject > > > The problem is it fails to find the device but I have a feeling it needs an > audio input and output device. I only have output > > > Ross > > > -- > > Sent from my mobile device. > > Please excuse brevity. > > > On 5 Sep 2012, at 09:17, Fedot Fedotov <fedot.fedotov at gmail.com> wrote: > > > What do you want to do: > > 1) use only audio(without video)? > > 2) switch the audio off? > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >
