Hi Dan, Thanks for the guidance Dan ...it worked........:-) On Wed, Oct 17, 2012 at 3:04 PM, Dan Arrhenius <dan at keystream.se> wrote: > Hi, > in the function pjsua_config_default() max_calls is set to 4 (unless > PJSUA_MAX_CALLS is less than 4). > So in order to have a maximum number of calls greater than 4 you must > change max_calls yourself somewhere between the call to > pjsua_config_default() and the call to pjsua_init(). > > Regards, > Dan > > > On Wed, 2012-10-17 at 14:54 +0530, john smith wrote: > > Hi, > > > > > > I am facing difficulties attempting to call more than 4 users.When the > > 5th user calls,the person gets a 486 busy here message. > > > > I have tried increasing PJSUA_MAX_CALLS from default 32 to 200. > > > > but in pjsip/src/pjsua-lib/pjsua_call.c function PJ_DEF(pj_status_t) > > pjsua_call_answer( pjsua_call_id call_id, i try to print the value of > > > > pjsua_var.ua_cfg.max_calls equal to 4. > > > > which as promised by the pjsip library should be more than the default > > 4 if PJSUA_MAX_CALLS is increased from default 32 to any number. > > > > i have set the value of PJSUA_MAX_CALLS to 200 and i am able to see > > that printing. > > > > However,pjsua_var.ua_cfg.max_calls still prints equal to 4. > > > > " > > unsigned pjsua_config::max_calls > > Maximum calls to support (default: 4). The value specified here must > > be smaller than the compile time maximum settings PJSUA_MAX_CALLS, > > which by default is 32. To increase this limit, the library must be > > recompiled with new PJSUA_MAX_CALLS value. > > > > > > " > > > > > > 14:44:11.014 APP Incoming call from "john smith" > > <sip:ekigatest at 172.22.0.15>!! > > inside pjsua answer in library > > pjsua_var.ua_cfg.max_calls----------->4 > > 14:44:11.015 strm0x1a249e18 VAD temporarily disabled > > 14:44:11.015 strm0x1a249e18 Encoder stream started > > 14:44:11.015 strm0x1a249e18 Decoder stream started > > > > > > ./ivrtestrunning_2 > > 14:43:59.928 os_core_unix.c pjlib 1.8.5 for POSIX initialized > > 14:43:59.928 os_core_unix.c SMAPLE : pjlib for POSIX initialized > > > > ****************************************************** > > 14:43:59.929 sip_endpoint.c Creating endpoint instance... > > 14:43:59.929 pjlib select() I/O Queue created (0x1a1e6840) > > 14:43:59.929 sip_endpoint.c Module "mod-msg-print" registered > > 14:43:59.929 sip_transport. Transport manager created. > > 14:43:59.929 sip_endpoint.c Module "mod-pjsua-log" registered > > 14:43:59.930 sip_endpoint.c Module "mod-tsx-layer" registered > > 14:43:59.930 sip_endpoint.c Module "mod-stateful-util" registered > > 14:43:59.930 sip_endpoint.c Module "mod-ua" registered > > 14:43:59.930 sip_endpoint.c Module "mod-100rel" registered > > 14:43:59.930 sip_endpoint.c Module "mod-pjsua" registered > > 200----------- > > 14:43:59.930 sip_endpoint.c Module "mod-invite" registered > > 14:44:00.085 pa_dev.c PortAudio sound library initialized, > > status=0 > > 14:44:00.085 pa_dev.c PortAudio host api count=2 > > 14:44:00.085 pa_dev.c Sound device count=12 > > 14:44:00.085 pjlib select( > > > > > > > > How can pjsua_var.ua_cfg.max_calls be increased from 4 to a higher > > number !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > > > > I see this has been a issue for many of pjsip support group.Kindly > > Help. > > > > Thanks in advance. > > > > John Smith > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > > > pjsip mailing list > > pjsip at lists.pjsip.org > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20121018/1d00ead9/attachment-0001.html>
