Is sending RTP over allocated TCP Turn relay IP:address is possible?
On Sat, Nov 17, 2012 at 12:58 AM, John Nash <john.nash778 at gmail.com> wrote:
> Hello,
>
> I am using pjsua Library to use TURN over TCP.. I am using following
> related config...
>
> 1- STUN is disabled.
> 2- Turn is enabled with following options.
> media_cfg.enable_turn=true;
> media_cfg.turn_conn_type=PJ_TURN_TP_TCP;
> media_cfg.turn_server=192.168.2.5:5743
> media_cfg.turn_auth_cred.type=PJ_STUN_AUTH_CRED_STATIC;
> media_cfg.turn_auth_cred.data.static_cred.username="test";
> media_cfg.turn_auth_cred.data.static_cred.realm=pj_str("domain.org
> ");
>
> media_cfg.turn_auth_cred.data.static_cred.data_type=PJ_STUN_PASSWD_PLAIN;
> media_cfg.turn_auth_cred.data.static_cred.data="test;
>
> My call works with RTP flow both ways through Turn Server but from traces
> I see that pjsua sends RTP to 192.168.2.5:5743 (which is Turn server TCP
> listen port) . I was under the impression that pjsua will send to the IP
> and port received from "Allocate Success" response from Turn server. Though
> RTP flow is both ways but i know something is wrong as for each call pjsua
> sends RTP to same IP and port !!
>
> What could I be doing wrong?
>
> J. Nash
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20121118/8f699a24/attachment-0001.html>
