Hmm? setting it to 90000 cause an error: Assertion failed: (clock_rate <= 65535), function pjmedia_wsola_create, file ../src/pjmedia/wsola.c, line 513. After reading the source of that file, it seems that the clock rate might only be for the video device. - chakrit http://chakrit.net On Tuesday, July 31, 2012 at 5:07 PM, Chakrit Wichian wrote: > Yes, that make senses. Fixing in Gossip now.. > > - chakrit > http://chakrit.net > > > On Tuesday, July 31, 2012 at 4:51 PM, Parvez Qureshi wrote: > > > Yesterday you mentioned about changing the clock rate/soundclock rate values > > From this link > > https://trac.pjsip.org/repos/changeset/3979 > > I see that default clock rate being used is something different than what is being used by the wrapper. > > Does it makes any sense? > > > > Thanks > > > > > > > > On 30-Jul-2012, at 11:34 PM, Chakrit Wichian wrote: > > > I don't think so. That flag just toggles the availability of the G729 codec in PJSIP. > > > > > > I think the default codec depends on the SIP server somewhat. > > > There is some negotiation going on when PJSIP connects. > > > > > > I'm already at home right now. I'll try tomorrow and let you know what I can find for the default codecs. > > > > > > - chakrit > > > http://chakrit.net > > > > > > > > > On Tuesday, July 31, 2012 at 1:00 AM, Parvez Qureshi wrote: > > > > > > > I will give a try to this change in transport type but what I see basically so far is that transport type > > > > is UDP by default for voip as it is much more efficient as compared to TCP. > > > > > > > > Also I would like to ask about the following entry in config_site.h file > > > > > > > > // enable G729 > > > > #define PJMEDIA_HAS_G729_CODEC 1 > > > > > > > > Does the above entry has anything to do with the issue of noise in call making that I am having. > > > > Can you tell what default codec does pjsip makes use of? > > > > > > > > Thanks > > > > From: pjsip-bounces@xxxxxxxxxxxxxxx (mailto:pjsip-bounces at lists.pjsip.org) [pjsip-bounces at lists.pjsip.org (mailto:pjsip-bounces at lists.pjsip.org)] on behalf of Chakrit Wichian [konshasu at chakrit.net (mailto:konshasu at chakrit.net)] > > > > Sent: Monday, July 30, 2012 6:09 PM > > > > To: pjsip list > > > > Subject: Re: pjsip and iOS5 > > > > > > > > Yes, that's correct. > > > > > > > > - chakrit > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > On Monday, July 30, 2012 at 7:37 PM, Parvez Qureshi wrote: > > > > > > > > > Do you want to say that I should use > > > > > GSTCPTransportType or GSTCP6TransportType instead of GSUDPTransportType > > > > > > > > > > for transport type in the wrapper class? > > > > > > > > > > > > > > > > > > > > On 30-Jul-2012, at 6:02 PM, Chakrit Wichian wrote: > > > > > > Now that I've looked at that file? How about changing it to use TCP transport? > > > > > > Maybe somehow your network are dropping UDP packets more aggresively than mine? > > > > > > > > > > > > Just a wild guess though. > > > > > > > > > > > > - chakrit > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 7:25 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > Hmm. I have no idea. It is working fine without noises here (even without G.729). > > > > > > > > > > > > > > Maybe you can try configuring the clock rate and/or other media configs options? > > > > > > > > > > > > > > In gossip it's done here: https://github.com/chakrit/gossip/blob/a43c0cb95e5abbe5ef1f9c3976cdbe716d69b5f2/Gossip/GSUserAgent.m#L97 > > > > > > > > > > > > > > I simply copied the default values from the Siphon project. > > > > > > > > > > > > > > - chakrit > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 7:20 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > Tried different codecs but still not able to resolve the noise issue. There is a lot of noise in the established call. > > > > > > > > Do you have any clue on this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 30-Jul-2012, at 3:54 PM, Chakrit Wichian wrote: > > > > > > > > > Hmm? not sure about that. It looks like there are build errors. > > > > > > > > > > > > > > > > > > I've just updated to Xcode 4.4 btw, maybe that's the problem? > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 5:20 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > Debugging issue > > > > > > > > > > The below message get consoled when trying to run on the iOS Device > > > > > > > > > > > > > > > > > > > > error: failed to launch '/Users/parvezqureshi/Library/Developer/Xcode/DerivedData/Gossip-bosdogosxmsnjmfgljxkjhroyayo/Build/Products/Debug-iphoneos/GossipExample.app/GossipExample' -- No such file or directory (/Users/parvezqureshi/Library/Developer/Xcode/DerivedData/Gossip-bosdogosxmsnjmfgljxkjhroyayo/Build/Products/Debug-iphoneos/GossipExample.app/GossipExample) > > > > > > > > > > > > > > > > > > > > Then i need to manually run the app from the home screen of the device. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 30-Jul-2012, at 3:46 PM, Chakrit Wichian wrote: > > > > > > > > > > > You just have to modify the build-pjsip script to make it builds pjsip on the simulator. (Just follow the PJSIP-provided tutorial) > > > > > > > > > > > Or build it yourself and replace the binaries linked in the example apps. > > > > > > > > > > > > > > > > > > > > > > As for the debugging, can you be more specific? What is preventing you from debugging on an iOS device? > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 5:13 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > Ok I will do more research on improving sound quality. > > > > > > > > > > > > You haven't commented on debugging on iOS device? > > > > > > > > > > > > > > > > > > > > > > > > Aslo do I need to set a linker flag so as to be able to run the project on simulator though the library is for device only compiled > > > > > > > > > > > > as I want to avoid using lipo to create a fat library > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > On 30-Jul-2012, at 2:46 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > You can try playing with the various codecs PJSIP provides. There's some very basic UI for enabling/disabling codec in the example app. > > > > > > > > > > > > > > > > > > > > > > > > > > But other than that, I think it's beyond my knowledge at this point. Maybe the PJSIP people can help you better than I do :) > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 4:13 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > The thing I forget to add is that I am not able to debug the application on device. > > > > > > > > > > > > > > Also the sound is already too large that it seems increasing the volume for incoming/outgoing channels will not help. > > > > > > > > > > > > > > Using g.729 codecs requires a license as we have discussed earlier. Can you suggest any other Codec to use instead that do not > > > > > > > > > > > > > > requires any license for its use. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 30-Jul-2012, at 1:57 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > Sorry for the late reply, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > hmm, strange as I have the same NAT error message too but it all works fine with both getonsip and sip2sip. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > AFAIK / heard You'll have to use G.729 for it to work reliably with good sound quality on the phone but the application I am developing have not reached that point where I can start configuring the codecs just yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > About the volume problem, the GSCall class exposes a "setVolume" property you can use to increase the volume. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Or you can simply modify this line directly to set a higher value to see if it makes any difference: > > > > > > > > > > > > > > > http://www.macupdate.com/app/mac/21884/neutrino/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The specific PJSUA call is pjsua_conf_adjust_rx_level for adjusting receiving volume and pjsua_conf_adjust_tx_level for adjusting transmitting (microphone) volume. Check the source if there's a problem as I've not find a good way to automatically test these just yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday, July 30, 2012 at 3:05 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It seems NAT service must be there in the network where you are trying to establish a voip sip connection. Without IP address resolution the application > > > > > > > > > > > > > > > > will not work. After bringing two iOS devices under a NAT enabled network I am be able to connect using two sip accounts. Also there is a lot of noise/disturbance in the call and actual voice is too low and one needs a lot of concentration to understand it. Do I need to make any particular selection in the list of Codecs or any other thing to change? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 27-Jul-2012, at 7:08 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > > > I got that as well. It is fine. PJSIP will still works even if there's no STUN server. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Make sure you have all the files up-to-date with what I just pushed a few mails back, not just that GSE file. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Friday, July 27, 2012 at 7:53 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > sorry for an incomplete info on the issue. May be it is due to this > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > NAT type detection failed: Invalid STUN server or server not configured (PJNATH_ESTUNINSERVER) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The above statement is also being consoled. Is it due to stun server not found or external ip address > > > > > > > > > > > > > > > > > > resolution getting failed. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 27-Jul-2012, at 5:37 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > > > > > Just replacing the file will not work. The changes I've pushed are more than just that file. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Why don't you just do a proper git checkout? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Friday, July 27, 2012 at 7:02 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > After replacing GSEConfigurationViewController from github and using your hard coded account information > > > > > > > > > > > > > > > > > > > > on simulator it gives invalid account info status when tapping on connect button. > > > > > > > > > > > > > > > > > > > > Also make call button remains disabled. Seems connect-->register process still remains > > > > > > > > > > > > > > > > > > > > incomplete > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 27-Jul-2012, at 4:25 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > > > > > > > Regarding test accounts, you can just use what I hard-coded in there. Just check the GSEConfigurationViewController.m file. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > About setting up 2 accounts, I have _thought_ about it and I have the checks and code in place (Theoretically you should be able to setup multiple GSAccount instances and connect them all at once.) but I havn't really put any time in testing that which is why GSUserAgent only expose one GSAccount right now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Plus, I am not sure about the "server" part tho. I build it from the ground up intending it to be for client-side code. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > About getonsip, you might want to check the spam folder. They mail servers are very low-rated IIRC. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Friday, July 27, 2012 at 5:48 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > it seems that the sample project with pjsip i.e. ipjsua sets up a local sip server with two accounts created. Correct me if i am wrong. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Can't we do similar things with your library? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 27-Jul-2012, at 1:28 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > > > > > > > > > Just pushed some changes to GitHub with the fix. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have to configure it like this for it to work: > > > > > > > > > > > > > > > > > > > > > > > https://github.com/chakrit/gossip/blob/master/GossipExample/GSEConfigurationViewController.m#L47 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > account = [GSAccountConfiguration defaultConfiguration]; > > > > > > > > > > > > > > > > > > > > > > > account.address = @"chakrit at sip2sip.info (mailto:chakrit at sip2sip.info)"; > > > > > > > > > > > > > > > > > > > > > > > account.username = @"chakrit"; > > > > > > > > > > > > > > > > > > > > > > > account.password = @"tyixr52w9k"; > > > > > > > > > > > > > > > > > > > > > > > account.domain = @"sip2sip.info (http://sip2sip.info/)"; > > > > > > > > > > > > > > > > > > > > > > > account.authRealm = @"sip2sip.info (http://sip2sip.info/)"; > > > > > > > > > > > > > > > > > > > > > > > account.proxyServer = @"proxy.sipthor.net (http://proxy.sipthor.net/)"; > > > > > > > > > > > > > > > > > > > > > > > [accounts addObject:account]; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hope this helps. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - chakrit > > > > > > > > > > > > > > > > > > > > > > > http://chakrit.net (http://chakrit.net/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Friday, July 27, 2012 at 2:29 PM, Parvez Qureshi wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Still getting the same crash even after making changes as described in your reply. > > > > > > > > > > > > > > > > > > > > > > > > I also tried registering on getonsip.com (http://getonsip.com/) but so far do not receive any instruction email that signifies registration completion. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 27-Jul-2012, at 12:52 PM, Chakrit Wichian wrote: > > > > > > > > > > > > > > > > > > > > > > > > > accConfig.publish_enabled = PJ_TRUE; > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > > > > > pjsip mailing list > > > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > > > pjsip mailing list > > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > _______________________________________________ > > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > > > pjsip mailing list > > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Visit our blog: http://blog.pjsip.org (http://blog.pjsip.org/) > > > > > > > > pjsip mailing list > > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Visit our blog: http://blog.pjsip.org > > > > > > pjsip mailing list > > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > > Visit our blog: http://blog.pjsip.org > > > > pjsip mailing list > > pjsip at lists.pjsip.org (mailto:pjsip at lists.pjsip.org) > > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20120731/c3d011bb/attachment-0001.html>
