Also, in case it wasn't clear. I am not receiving any replies whatsoever on wireshark. I keep sending this mesage Source: 10.52.230.74 Destination: 192.168.212.24 Protocol:SIP Length:585 Info: Request: REGISTER sip:ericssonlte.com On Fri, Jul 6, 2012 at 5:38 PM, Arjun Kamath <junnaonly at gmail.com> wrote: > Hi, > > I am developing my tool in Visual Studio 2008 using pjsip 2.0 without any > video. > > My machine has 2 NICs as follows: > > Windows IP Configuration > > Ethernet adapter Local Area Connection 2: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : 10.52.230.74 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : > > Ethernet adapter Local Area Connection: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : 131.160.81.63 > Subnet Mask . . . . . . . . . . . : 255.255.252.0 > Default Gateway . . . . . . . . . : 131.160.80.1 > > I would like my VoIP application to communicate to the Proxy over > 10.52.230.74. I have set each of the following to 10.52.230.74 > > app_config.udp_config.public_addr > app_config.udp_config.bound_addr > app_config.rtp_config.public_addr > app_config.rtp_config.bound_addr > > What is strange is that on the Wireshark trace, the packet source is shown > as 10.52.230.74 but it is sent over the 131.160.81.63 interface(I have to > activate the sniffer on the 131.160.81.63 to see any SIP messages) There > are no SIP messages sent over 10.52.230.74 interface. > > I have tried to compare my tool with pjsua_app and things look the same. > > Any advice? > > Regards, > Arjun > > > > -- Best Regards, Arjun P. Kamath -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20120706/0c28e9c2/attachment.html>
